STF12N65M5 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 23

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

■ Worldwide best RDS(on) * area ■ Higher VDSS rating and high dv/dt capability ■ Excellent switching performance ■ Easy to drive ■ 100% avalanche tested

Applications

Description

These devices are N-channel MDmesh™ V Power MOSFETs based on an innovative proprietary vertical process technology, which is combined with STMicroelectronics’ well-known PowerMESH™ horizontal layout structure. The resulting product has extremely low on- resistance, which is unmatched among silicon- based Power MOSFETs, making it especially suitable for applications which require superior power density and outstanding efficiency. Figure 1. Internal schematic diagram

8.5 A(1)

  1. Limited only by maximum temperature allowed.

Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Limited only by maximu m temperature allowed.
  2. Pulse width limited by safe operating area.

Table 3. Thermal data

  1. When mounted on 1inch² FR-4 board, 2 oz Cu

2 Electrical characteristics

Table 4. On /off states Table 5. Dynamic

  1. Time related is defined as a constant equivalent capacitance giving the same charging time as Coss when
  2. Energy related is defined as a constant equivalent capacitance giving the same stored energy as Coss

Table 6. Switching times Table 7. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%

2.1 Electrical characteristics (c urves)

Figure 2. Safe operating area for TO-220 and Figure 3. Thermal impedance for TO-220 and Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for DPAK, IPAK Figure 7. Thermal impedance for DPAK, IPAK

3 Test circuits

Figure 19. Switching times test circuit for Figure 20. Gate charge test circuit Figure 21. Test circuit for inductive load Figure 22. Unclamped inductive load test Figure 23. Unclamped inductive wavefor m Figure 24. Switching time waveform

Package mechanical data STD/F/I/P/U12N65M5 10/23 Doc ID 15428 Rev 5

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

Table 8. DPAK (TO-252) mechanical data

Table 9. IPAK (TO-251) mechanical data

Figure 27. IPAK (TO-251) drawing

Table 10. I²PAK (TO-262) mechanical data

Figure 28. I²PAK (TO-262) drawing

Table 11. TO-220 type A mechanical data

Figure 29. TO-220 type A drawing

Figure 30. TO-220FP drawing Table 12. TO-220FP mechanical data

5 Packaging mechanical data

Table 13. DPAK (TO-252) tape and reel mechanical data

6 Revision history

Table 14. Document revision history 22-Jun-2011 5 Updated Figure 18 and Figure 20. Updated gate charge in Table 5 and switching time in Table 6.