STD11NM60ND_10 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 19

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

■ The worldwide best RDS(on)* area amongst the fast recovery diode devices ■ 100% avalanche tested ■ Low input capacitance and gate charge ■ Low gate input resistance ■ Extremely high dv/dt and avalanche capabilities Application Switching applications

Description

The device is an N-channel FDmesh™ II Power MOSFET that belongs to the second generation of MDmesh™ technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout and associates all advantages of reduced on- resistance and fast switching with an intrinsic fast- recovery body diode.It is therefore strongly recommended for bridge topologies, in particular ZVS phase-shift converters. Figure 1. Internal schematic diagram

10 A(1)

  1. Limited only by maximum temperature allowed

Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Limited only by maximu m temperature allowed
  2. Pulse width limited by safe operating area
  3. I SD ≤ 10 A, di/dt ≤ 400 A/µs, VDD = 80% V(BR)DSS, peak VDS ≤ V(BR)DSS

Table 3. Thermal data

  1. When mounted on 1inch² FR-4 board, 2 oz Cu

Table 4. Avalanche characteristics

  1. Pulse width limited by Tj max
  2. starting Tj= 25 °C, I D=IAS, VDD= 50 V

2 Electrical characteristics

Table 5. On/off states

  1. Value measured at turn off under inductive load

Table 6. Dynamic

  1. Pulsed: pulse duration = 300µs, duty cycle 1.5%
  2. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS

Table 7. Switching times Table 8. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration = 300µs, duty cycle 1.5%

2.1 Electrical characterist ics (curves)

Figure 2. Safe operating area for TO-220, Figure 3. Thermal impedance for TO-220, Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for DPAK, IPAK Figure 7. Thermal impedance for DPAK, IPAK

3 Test circuits

Figure 18. Switching times test circuit for Figure 19. Gate charge test circuit Figure 20. Test circuit for inductive load Figure 21. Unclamped inductive load test Figure 22. Unclamped inductive wavefor m Figure 23. Switching time waveform

STD/F/I/P/U11NM60ND Package mechanical data Doc ID 14625 Rev 2 11/19

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

Figure 24. TO-220FP drawing Table 9. TO-220FP mechanical data

STD/F/I/P/U11NM60ND Package mechanical data Doc ID 14625 Rev 2 13/19 TO-220 type A mechanical data Dim mm Min Typ Max A 4.40 4.60 b 0.61 0. 88 b1 1.14 1.70 c0 . 4 8 0.70 D 15.25 15.75 D1 1.27 E1 0 1 0 . 4 0 e 2.40 2.70 e1 4. 95 5.15 F1 . 2 3 1.32 H1 6.20 6.60 J1 2.40 2.72 L1 3 14 L1 3.50 3.93 L20 16.40 L302 8.90 ∅P 3.75 3.85 Q 2.65 2. 95 0015988_Rev_S

Package mechanical data STD/F/I/P/U11NM60ND 14/19 Doc ID 14625 Rev 2 I²PAK (TO-262) mechanical data Dim mm inch Min Typ Max Min Typ Max A 4.40 4.60 0.17 3 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0. 88 0.024 0.0 34 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.2 3 1.320 . 0 4 8 0.052 D 8.95 9. 350 . 352 0. 368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0. 393 0.410 L1 3 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055

STD/F/I/P/U11NM60ND Package mechanical data Doc ID 14625 Rev 2 15/19 DIM. mm. min. typ max. A 2.20 2.40 A1 0. 901 . 1 0 A2 0.0 3 0.23 b 0.64 0. 90 b4 5.20 5.40 c 0.45 0.60 c2 0.4 8 0.60 D 6.00 6.20 D1 5.10 E 6.40 6.60 E1 4.70 e2 . 2 8 e1 4.40 4.60 H 9.35 10.10 L1 2. 80 L2 0. 80 L4 0.60 1 R0 . 2 0 V2 0 o 8 o TO-252 (DPAK) mechanical data 0068772_G

Package mechanical data STD/F/I/P/U11NM60ND 16/19 Doc ID 14625 Rev 2 DIM. mm. min. typ max. A 2.20 2.40 A1 0. 901 . 1 0 b 0.64 0. 90 b2 0.95 b4 5.20 5.40 c 0.45 0.60 c2 0.4 8 0.60 D 6.00 6.20 E 6.40 6.60 e2 . 2 8 e1 4.40 4.60 H 16.10 L 9.00 9.40 (L1) 0. 801 . 2 0 L2 0. 80 V1 10 o TO-251 (IPAK) mechanical data 0068771_H

STD/F/I/P/U11NM60ND Pa ckaging mechanical data Doc ID 14625 Rev 2 17/19

5 Packaging mechanical data

DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0.795 G 16.4 18.4 0.645 0.724 N 50 1.968 T 22.4 0.881 BASE QTY BULK QTY 2500 2500 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 12.1 0.476 D 1.5 1.6 0.059 0.063 D1 1.5 0.059 E 1.65 1.85 0.065 0.073 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 P0 3.9 4.1 0.153 0.161 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 1.574 W 15.7 16.3 0.618 0.641 TAPE MECHANICAL DATA All dimensions are in millimeters

6 Revision history

Table 10. Document revision history