STB100N10F7_V01 STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 28
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Test circuits
- 4 Package information
- 4.1 D²PAK (TO-263) type A package information
- 4.2 DPAK (TO-252) type A2 package information
- 4.3 D²PAK and DPAK packing information
- 4.4 TO-220FP package information
- 4.5 I²PAK package information
- 4.6 TO-220 type A package information
- 5 Ordering information
Features
Order codes VDS RDS(on) max. ID Package STB100N10F7 100 V 8.0 mΩ
80 A D2PAK
- Among the lowest R DS(on) on the market
- Excellent FoM (figure of merit)
- Low C rss/Ciss ratio for EMI immunity
- High avalanche ruggedness
Applications
- Switching applications
Description
These N-channel Power MOSFETs utilize STripFET™ F7 technology with an enhanced trench gate structure that results in very low on-state resistance, while also reducing internal capacitance and gate charge for faster and more efficient switching.Product status links STB100N10F7 STD100N10F7 STF100N10F7 STI100N10F7 STP100N10F7 N-channel 100 V, 6.8 mΩ typ., 80 A STripFET™ F7 Power MOSFETs in D2PAK, DPAK, TO-220FP, I2PAK and TO-220 packages STB100N10F7, STD100N10F7, STF100N10F7 STI100N10F7, STP100N10F7 Datasheet DS9291 - Rev 5 - June 2018 For further information contact your local STMicroelectronics sales office.
1 Electrical ratings
Table 1. Absolute maximum ratings
- This value is limited by package.
- Pulse width is limited by safe operating area.
Table 2. Thermal resistance
- When mounted on an 1-inch2 FR-4 board, 2oz CU, t < 10 s.
Table 3. Avalanche characteristics
2 Electrical characteristics
(TCASE = 25 °C unless otherwise specified) Table 4. On-/off-states
- Defined by design, not subject to production test.
Table 5. Dynamic Table 6. Switching times Figure 21. Switching time
Electrical characteristics
Table 7. Source-drain diode
- Pulse width is limited by safe operating area.
- Pulsed: pulse duration = 300 µs, duty cycle 1.5%
2.1 Electrical characteristics (curves)
Figure 1. Safe operating area for DPAK Figure 2. Thermal impedance for DPAK Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Safe operating area for D2PAK, I2PAK and Figure 6. Thermal impedance for D2PAK, I2PAK and
Figure 7. Output characteristics Figure 8. Transfer characteristics Figure 9. Normalized V(BR)DSS vs temperature Figure 10. Static drain-source on-resistance
14.0 V GS =10V
Figure 11. Gate charge vs gate-source voltage Figure 12. Capacitance variations
3 Test circuits
Figure 16. Test circuit for resistive load switching times Figure 17. Test circuit for gate charge behavior Figure 18. Test circuit for inductive load switching and Figure 19. Unclamped inductive load test circuit Figure 20. Unclamped inductive waveform Figure 21. Switching time waveform
4 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Package information
4.1 D²PAK (TO-263) type A package information
Figure 22. D²PAK (TO-263) type A package outline
Table 8. D²PAK (TO-263) type A package mechanical data
Figure 23. D²PAK (TO-263) recommended footprint (dimensions are in mm)
4.2 DPAK (TO-252) type A2 package information
Figure 24. DPAK (TO-252) type A2 package outline
Table 9. DPAK (TO-252) type A2 mechanical data
Figure 25. DPAK (TO-252) recommended footprint (dimensions are in mm)
4.3 D²PAK and DPAK packing information
Figure 26. Tape outline
Figure 27. Reel outline Table 10. D²PAK tape and reel mechanical data
Table 11. DPAK tape and reel mechanical data
4.4 TO-220FP package information
Figure 28. TO-220FP package outline
Table 12. TO-220FP package mechanical data
4.5 I²PAK package information
Figure 29. I²PAK package outline
Table 13. I²PAK package mechanical data
4.6 TO-220 type A package information
Figure 30. TO-220 type A package outline
Table 14. TO-220 type A package mechanical data
5 Ordering information
Table 15. Order codes
Ordering information
Revision history
Table 16. Document revision history 05-Oct-2012 1 Initial release. Inserted device in TO-220FP. diode and Section 4: Package mechanical data. Added Section 5: Packaging mechanical data. 5: Packaging mechanical data. Added STI100N10F7 device and updated the document accordingly. Updated Table 1. Absolute maximum ratings. Updated Section 4 Package information.