STH22N95K5-2AG STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 16

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package information
  • 4.1 H²PAK-2 package information
  • 4.2 H²PAK-2 packing information

Features

Order code VDS RDS(on) max. ID PTOT STH22N95K5-2AG 950 V 0.330 Ω 17.5 A 250 W

  • Designed for automotive applications
  • Industry’s lowest R DS(on) x area
  • Industry’s best FoM (figure of merit)
  • Ultra-low gate charge
  • 100% avalanche tested
  • Zener-protected

Applications

  • Switching applications

Description

This very high voltage N-channel Power MOSFET is designed using MDmesh™ K5 technology based on an innovative proprietary vertical structure. The result is a dramatic reduction in on-resistance and ultra-low gate charge for applications requiring superior power density and high efficiency. Product status link STH22N95K5-2AG Product summary(1) Order code STH22N95K5-2AG Marking 22N95K5 Package H²PAK-2 Packing Tape and reel 1. HTRB test has been performed at 80% of V(BR)DSS according to AEC-Q101 rev. C. All the other tests have been done according to the AEC-Q101 rev. Automotive N-channel 950 V, 0.280 Ω typ., 17.5 A MDmesh™ K5 Power MOSFET in an H²PAK-2 package STH22N95K5-2AG Datasheet DS12151 - Rev 3 - March 2019 For further information contact your local STMicroelectronics sales office. Prerelease product(s)

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Pulse width limited by safe operating area.

Table 2. Thermal data

  1. When mounted on FR-4 board of 1 inch², 2 oz Cu.

Table 3. Avalanche characteristics

2 Electrical characteristics

TC = 25 °C unless otherwise specified. Table 4. On/off-state

  1. Defined by design, not subject to production test

Table 5. Dynamic

  1. C o(er) is a constant capacitance value that gives the same stored energy as Coss while VDS is rising from 0 to 80% VDSS.
  2. C o(tr) is a constant capacitance value that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS.

Table 6. Switching times Figure 19. Switching time waveform)

Electrical characteristics

Prerelease product(s)

Table 7. Source-drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%

Table 8. Gate-source Zener diode The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device. additional external componentry. Prerelease product(s)

2.1 Electrical characteristics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characteristics Figure 4. Transfer characteristics Figure 5. Gate charge vs gate-source voltage Figure 6. Static drain-source on-resistance

Figure 7. Capacitance variation Figure 8. Output capacitance stored energy

0 V DS (V)

Figure 9. Normalized gate threshold voltage vs Figure 10. Normalized on-resistance vs temperature Figure 11. Maximum avalanche energy vs starting TJ Figure 12. Normalized V(BR)DSS vs temperature

Figure 13. Source-drain diode forward characteristics

3 Test circuits

Figure 14. Test circuit for resistive load switching times Figure 15. Test circuit for gate charge behavior Figure 16. Test circuit for inductive load switching and Figure 17. Unclamped inductive load test circuit Figure 18. Unclamped inductive waveform Figure 19. Switching time waveform

4 Package information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. STH22N95K5-2AG

Package information

Prerelease product(s)

4.1 H²PAK-2 package information

Figure 20. H²PAK-2 package outline

Table 9. H²PAK-2 package mechanical data Figure 21. H²PAK-2 recommended footprint

4.2 Packing information

Figure 22. Tape outline

Figure 23. Reel outline Table 10. Tape and reel mechanical data

Revision history

Table 11. Document revision history 04-Jul-2017 1 First release. Figure 11. Maximum avalanche energy vs starting TJ. Updated Section 4.1 H²PAK-2 package information. Modified Table 1. Absolute maximum ratings.