STGO30H60DLLFBAG STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: STMICROELECTRONICS
- PDF pages: 15
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Package information
- 3.1 TO-LL type B package information
- 3.2 TO-LL packing information
Features
- AEC-Q101 qualified
- Maximum junction temperature: T J = 175 °C
- Logic level gate drive
- High-speed switching series
- Minimized tail current
- V CE(sat) = 1.6 V (typ.) @ IC = 30 A
- Low V F soft-recovery co-packaged diode
- Tight parameter distribution
- Safer paralleling
- Low thermal resistance
Applications
- Automotive injection
Description
This device is an IGBT developed using an advanced proprietary trench gate field- stop structure. The device is part of the new HB series of IGBTs, which represents an optimum compromise between conduction and switching loss to maximize the efficiency of any frequency converter. Furthermore, the slightly positive VCE(sat) temperature coefficient and very tight parameter distribution result in safer paralleling operation. Product status link STGO30H60DLLFBAG Product summary Order code STGO30H60DLLFBAG Marking GO30H60DLL Package TO-LL type B Packing Tape and reel Automotive-grade trench gate field-stop, 600 V, 30 A, high-speed HB series IGBT in a TO‑LL package STGO30H60DLLFBAG Datasheet DS12913 - Rev 4 - January 2022 For further information contact your local STMicroelectronics sales office.
1 Electrical ratings
Table 1. Absolute maximum ratings Table 2. Thermal data
2 Electrical characteristics
TC = 25 °C unless otherwise specified Table 3. Static characteristics Table 4. Dynamic characteristics Table 5. IGBT switching characteristics (inductive load)
- Including the tail of the collector current.
Electrical characteristics
2.1 Electrical characteristics (curves)
Figure 1. Total power dissipation vs temperature Figure 2. Maximum collector current vs temperature Figure 3. Typical output characteristics (TJ = 25 °C) Figure 4. Typical output characteristics (TJ = 175 °C) Figure 5. Typical VCE(sat) vs temperature Figure 6. Typical VCE(sat) vs collector current
3 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
3.1 TO-LL type B package information
Figure 23. TO-LL type B package outline
Package information
Table 6. TO-LL type B package mechanical data
Figure 24. TO-LL type B recommended footprint (dimensions are in mm)
3.2 TO-LL packing information
Figure 25. Carrier tape outline and dimensions Figure 26. Reel outline and dimensions
Figure 27. TO-LL orientation in tape pocket
Revision history
Table 7. Document revision history 08-Feb-2019 1 First release. Updated Section 3.1 TO-LL type B package information. Added Section 3.2 TO-LL packing information. Modified marking on cover page. Modified Table 1. Absolute maximum ratings. Updated Section 3.1 TO-LL type B package information. Table 5. IGBT switching characteristics (inductive load). Added Section 2.1 Electrical characteristics (curves).