Datasheet - STD9NM60N, STF9NM60N, STP9NM60N - N-channel 600 V, 0.63 Ω typ., 6.5 A MDmesh™ II Power MOSFETs in DPAK, TO-220FP and TO-220 packages

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 24

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics curves
  • 3 Test circuits
  • 4 Package information
  • 4.1 DPAK (TO-252) type A package information
  • 4.2 DPAK (TO-252) type C2 package information
  • 4.3 DPAK (TO-252) packing information
  • 4.4 TO-220FP package information
  • 4.5 TO-220 type A package information
  • 5 Ordering information

Features

Order code VDS RDS(on) max. ID Package STD9NM60N 600 V 0.745 Ω 6.5 A DPAK STF9NM60N TO-220FP STP9NM60N TO-220

  • 100% avalanche tested
  • Low input capacitance and gate charge
  • Low gate input resistance

Applications

  • Switching applications

Description

These devices are N-channel Power MOSFETs developed using the second generation of MDmesh™ technology. These revolutionary Power MOSFETs associate a vertical structure to the company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. They are therefore suitable for the most demanding high-efficiency converters. Product status link STD9NM60N STF9NM60N STP9NM60N N-channel 600 V, 0.63 Ω typ., 6.5 A MDmesh™ II Power MOSFETs in DPAK, TO-220FP and TO-220 packages STD9NM60N, STF9NM60N, STP9NM60N Datasheet DS6986 - Rev 2 - September 2018 For further information contact your local STMicroelectronics sales office.

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Limited by maximum junction temperature.
  2. Pulse width limited by safe operating area.

Table 2. Thermal data

  1. When mounted on 1inch² FR-4, 2 Oz copper board.

Table 3. Avalanche characteristics

2 Electrical characteristics

(TCASE = 25 °C unless otherwise specified) Table 4. On/off states

  1. Defined by design, not subject to production test.

Table 5. Dynamic

  1. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0

Table 6. Switching times

Electrical characteristics

Table 7. Source drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%.

2.1 Electrical characteristics curves

Figure 1. Safe operating area for DPAK Figure 2. Thermal impedance for DPAK Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Safe operating area for TO-220 Figure 6. Thermal impedance for TO-220

Figure 7. Output characterisics Figure 8. Transfer characteristics Figure 9. Gate charge vs gate-source voltage Figure 10. Static drain-source on resistance

0.66 V G S =10V

Figure 11. Capacitance variations Figure 12. Output capacitance stored energy

3 Test circuits

Figure 16. Test circuit for resistive load switching times Figure 17. Test circuit for gate charge behavior Figure 18. Test circuit for inductive load switching and Figure 19. Unclamped inductive load test circuit Figure 20. Unclamped inductive waveform Figure 21. Switching time waveform

4 Package information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. STD9NM60N, STF9NM60N, STP9NM60N

Package information

4.1 DPAK (TO-252) type A package information

Figure 22. DPAK (TO-252) type A package outline

Table 8. DPAK (TO-252) type A mechanical data

4.2 DPAK (TO-252) type C2 package information

Figure 23. DPAK (TO-252) type C2 package outline

Table 9. DPAK (TO-252) type C2 mechanical data

Figure 24. DPAK (TO-252) recommended footprint (dimensions are in mm)

4.3 DPAK (TO-252) packing information

Figure 25. DPAK (TO-252) tape outline

Figure 26. DPAK (TO-252) reel outline Table 10. DPAK (TO-252) tape and reel mechanical data

4.4 TO-220FP package information

Figure 27. TO-220FP package outline

Table 11. TO-220FP package mechanical data

4.5 TO-220 type A package information

Figure 28. TO-220 type A package outline

Table 12. TO-220 type A package mechanical data

5 Ordering information

Table 13. Order codes

Ordering information

Revision history

Table 14. Document revision history 20-Oct-2010 1 First release. Updated Section 4 Package information.