STF9NK80Z

STP9NK80Z STMICROELECTRONICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

Table 3: Absolute Maximum ratings (/circle6 ) Pulse width limited by safe operating area (1) ISD ≤7.5A, di/dt ≤200A/µs, VDD = 80% V(BR)DSS (*) Limited only by maximum temperature allowed Table 4: Thermal Data Table 5: Avalanche Characteristics Table 6: Gate-Source Zener Diode PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the usage of external components. Symbol Parameter Value Unit TO-220 TO-220FP VDS Drain-source Voltage (VGS = 0) 800 V VDGR Drain-gate Voltage (RGS = 20 kΩ ) 800 V VGS Gate- source Voltage ± 30 V ID Drain Current (continuous) at TC = 25°C 7.5 7.5 (*) A ID Drain Current (continuous) at TC = 100°C 4.7 4.7 (*) A IDM (/circle6 ) Drain Current (pulsed) 30 30 (*) A PTOT Total Dissipation at TC = 25°C 150 35 W Derating Factor 1.20 0.28 W/ °C VESD(G-S) Gate source ESD(HBM-C=100pF, R=1.5KΩ) 4000 V dv/dt (1) Peak Diode Recovery voltage slope 4.5 V/ns VISO Insulation Withstand Voltage (DC) - 2500 V Tj Tstg Operating Junction Temperature Storage Temperature -55 to 150 -55 to 150 TO-220 TO-220FP Rthj-case Thermal Resistance Junction-case Max 0.83 3.6 °C/W Rthj-amb Thermal Resistance Junction-ambient Max 62.5 °C/W Tl Maximum Lead Temperature For Soldering Purpose 350 °C Symbol Parameter Max Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) 7.5 A EAS Single Pulse Avalanche Energy (starting Tj = 25 °C, ID = IAR , VDD = 50 V) 350 mJ Symbol Parameter Test Conditions Min. Typ. Max. Unit BV GSO Gate-Source Breakdown Voltage Igs=± 1mA (Open Drain) 30 V

ELECTRICAL CHARACTERISTICS (TCASE =25°C UNLESS OTHERWISE SPECIFIED) Table 7: On/Off Table 8: DYNAMIC Table 9: Source Drain Diode Note: 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. 2. Pulse width limited by safe operating area. 3. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS . Symbol Parameter Test Conditions Min. Typ. Max. Unit V(BR)DSS Drain-source Breakdown Voltage ID = 1 mA, VGS = 0 800 V IDSS Zero Gate Voltage Drain Current (VGS = 0) VDS = Max Rating VDS = Max Rating, TC = 125 °C µA µA IGSS Gate-body Leakage Current (VDS = 0) VGS = ± 20V ±10 µA VGS(th) Gate Threshold Voltage VDS = VGS , ID = 100µA 33 . 7 5 4 . 5V R DS(on) Static Drain-source On Resistance VGS = 10V, ID = 3.75 A 0.9 1.2 Ω Symbol Parameter Test Conditions Min. Typ. Max. Unit gfs (1) Forward Transconductance V DS = 15 V, ID = 3.75 A 7.5 S C iss C oss C rss Input Capacitance Output Capacitance Reverse Transfer Capacitance VDS = 25V, f = 1 MHz, VGS = 0 1900 180 pF pF pF C oss eq. (3) Equivalent Output Capacitance VGS = 0V, VDS = 0V to 640V 75 pF td(on) tr td(off) tf Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time V DD = 400 V, ID = 3.75 A R G =4 . 7Ω VGS = 10 V (see Figure 19) ns ns ns ns t r(Voff) tf tc Off-voltage Rise Time Fall Time Cross-over Time VDD = 640 V, ID = 7.5A, R G =4 . 7Ω, VGS = 10V (see Figure 20) ns ns ns Q g Q gs Q gd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD = 640V, ID = 7.5 A, VGS = 10V (see Figure 22) 84 nC nC nC Symbol Parameter Test Conditions Min. Typ. Max. Unit I SD ISDM (2) Source-drain Current Source-drain Current (pulsed) 7.5 A A VSD (1) Forward On Voltage ISD = 7.5 A, VGS = 0 1.6 V trr Q rr IRRM Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 7.5 A, di/dt = 100A/µs VDD = 35V, Tj = 25°C (see Figure 20) 530 4.5 ns µC A trr Q rr IRRM Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current I SD = 7.5 A, di/dt = 100A/µs VDD = 35V, Tj = 150°C (see Figure 20) 690 6.4 ns µC A

DIM. mm. inch A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L30 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 TO-220 MECHANICAL DATA

A B D E H G F 123F2 L4L5 DIM. mm. inch A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 TO-220FP MECHANICAL DATA

Table 10: Revision History Date Revision Description of Changes 18-May-2005 1 First Release.

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners © 2005 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America