Datasheet - STD9N65M2, STF9N65M2, STP9N65M2, STU9N65M2 - N-channel 650 V, 0.79 Ω typ., 5 A MDmesh M2 Power MOSFETs in DPAK, TO-220FP, TO-220 and IPAK packages
Document overview
- Manufacturer or author: STMICROELECTRONICS
- PDF pages: 28
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Test circuits
- 4 Package information
- 4.1 DPAK (TO-252) type A package information
- 4.2 DPAK (TO-252) type C package information
- 4.3 DPAK (TO-252) packing information
- 4.4 TO-220FP package information
- 4.5 TO-220 type A package information
- 4.6 IPAK (TO-251) type A package information
- 4.7 IPAK (TO-251) type C package information
- 5 Ordering information
Features
Order codes VDS RDS(on) max. ID Package STD9N65M2 650 V 0.90 Ω 5 A DPAK STF9N65M2 TO-220FP STP9N65M2 TO-220 STU9N65M2 IPAK
- Extremely low gate charge
- Excellent output capacitance (C OSS) profile
- 100% avalanche tested
- Zener-protected
Applications
- Switching applications
Description
These devices are N-channel Power MOSFETs developed using the MDmesh M2 technology. Thanks to their strip layout and improved vertical structure, these devices exhibit low on-resistance and optimized switching characteristics, rendering them suitable for the most demanding high-efficiency converters. Product status link STD9N65M2 STF9N65M2 STP9N65M2 STU9N65M2 N-channel 650 V, 0.79 Ω typ., 5 A MDmesh M2 Power MOSFETs in DPAK, TO-220FP, TO-220 and IPAK packages STD9N65M2, STF9N65M2 STP9N65M2, STU9N65M2 Datasheet DS10197 - Rev 3 - June 2019 For further information contact your local STMicroelectronics sales office.
1 Electrical ratings
Table 1. Absolute maximum ratings
- Current limited by package.
- Pulse width is limited by safe operating area.
Table 2. Thermal data
- When mounted on 1 inch2 FR-4, 2 Oz copper board.
Table 3. Avalanche characteristics
2 Electrical characteristics
(TC = 25 °C unless otherwise specified) Table 4. On/off states
- Defined by design, not subject to production test.
Table 5. Dynamic
- C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0
Table 6. Switching times Figure 22. Switching time waveform)
Electrical characteristics
Table 7. Source-drain diode
- Pulse width is limited by safe operating area.
- Pulsed: pulse duration = 300 µs, duty cycle 1.5%.
2.1 Electrical characteristics (curves)
Figure 1. Safe operating area for DPAK and IPAK Figure 2. Thermal impedance for DPAK and IPAK Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Safe operating area for TO-220 Figure 6. Thermal impedance for TO-220
Figure 13. Normalized gate threshold voltage vs Figure 14. Normalized on-resistance vs temperature Figure 15. Source-drain diode forward characteristics
2 I SD
Figure 16. Output capacitance stored energy
3 Test circuits
Figure 17. Test circuit for resistive load switching times Figure 18. Test circuit for gate charge behavior Figure 19. Test circuit for inductive load switching and Figure 20. Unclamped inductive load test circuit Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform
4 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. STD9N65M2, STF9N65M2, STP9N65M2, STU9N65M2
Package information
4.1 DPAK (TO-252) type A package information
Figure 23. DPAK (TO-252) type A package outline
Table 8. DPAK (TO-252) type A mechanical data
4.2 DPAK (TO-252) type C package information
Figure 24. DPAK (TO-252) type C package outline
Table 9. DPAK (TO-252) type C mechanical data
Figure 25. DPAK (TO-252) recommended footprint (dimensions are in mm)
4.3 DPAK (TO-252) packing information
Figure 26. DPAK (TO-252) tape outline
Figure 27. DPAK (TO-252) reel outline Table 10. DPAK (TO-252) tape and reel mechanical data
4.4 TO-220FP package information
Figure 28. TO-220FP package outline
Table 11. TO-220FP package mechanical data
4.5 TO-220 type A package information
Figure 29. TO-220 type A package outline
Table 12. TO-220 type A package mechanical data
4.6 IPAK (TO-251) type A package information
Figure 30. IPAK (TO-251) type A package outline
Table 13. IPAK (TO-251) type A package mechanical data
4.7 IPAK (TO-251) type C package information
Figure 31. IPAK (TO-251) type C package outline
Table 14. IPAK (TO-251) type C package mechanical data
5 Ordering information
Table 15. Order codes
Ordering information
DS10197 - Rev 3 page 25/28
Revision history
Table 16. Document revision history 24-Feb-2014 1 First release. Removed maturity status indication from cover page. The document status is production data.