STF45N10F7 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Revision history

Features

  • Ultra low on-resistance
  • 100% avalanche tested

Applications

  • Switching applications

Description

This device utilizes the 7th generation of design rules of ST’s proprietary STripFET™ technology, with a new gate structure. The resulting Power MOSFET exhibits the lowest R DS(on) in all packages. TO-220FP $0Y Order code V DS RDS(on) max.(1) 1. @ VGS = 10 V ID PTOT STF45N10F7 100 V 0.018 Ω 30 A 25 W Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Pulse width limited by safe operating area.

Table 3. Thermal resistance

2 Electrical characteristics

Table 4. On/off states Table 5. Dynamic Table 6. Switching times

Table 7. Source-drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: pulse duration=300 μs, duty cycle 1.5%.

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Gate charge vs gate-source voltage Figure 7. Static drain-source on-resistance

10 ID(A)

3 Test circuits

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test circuit Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.

Table 8. TO-220FP mechanical data

Figure 19. TO-220FP drawing

5 Revision history

Table 9. Document revision history 03-Dec-2012 1 First release. 11-Nov-2013 3 Document status promoted from preliminary to production data.