STF40NF06_06 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Revision history

N-channel 60V - 0.024Ω - 23A - TO-220FP STripFET™ II Power MOSFET General features ■ Exceptional dv/dt capability ■ Low gate charge at 100°C ■ Application oriented characterization ■ 100% avalanche tested

Description

This MOSFET is the latest development of STMicroelectronics unique “Single Feature Size™” strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalance characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility.

Applications

■ Switching application Internal schematic diagram Type V DSS RDS(on) ID STF40NF06 60V <0.028 Ω 23A TO-220FP Order codes Part number Marking Package Packaging STF40NF06 F40NF06 TO-220FP Tube

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Pulse width limited by safe operating area
  2. I SD ≤ 40A, di/dt ≤ 300A/µs, VDD ≤ V(BR)DSS, Tj ≤ TJMAX

Table 2. Thermal data

2 Electrical characteristics

Table 3. On/off states Table 4. Dynamic

  1. Pulsed: pulse duration=300µs, duty cycle 1.5%

Table 5. Switching times

Table 6. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration=300µs, duty cycle 1.5%

2.1 Electrical characteri stics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance

3 Test circuit

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped Inductive load test Figure 17. Unclamped inductive wavefo rm Figure 18. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

A B D E H G F 123F2 L4L5 DIM. mm. inch A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 TO-220FP MECHANICAL DATA

5 Revision history

Table 7. Revision history