Datasheet - STF13N95K3, STP13N95K3, STW13N95K3 - N‑channel 950 V, 680 mΩ typ., 10 A MDmesh K3 Power MOSFET in a TO-220FP, TO-220 and TO-247 packages
Document overview
- Manufacturer or author: STMICROELECTRONICS
- PDF pages: 18
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Test circuits
- 4 Package information
- 4.1 TO-220FP type B package information
- 4.2 TO-220 type A package information
- 4.3 TO-247 package information
- 5 Ordering information
Features
Order codes VDS RDS(on) max. ID STF13N95K3
950 V 850 mΩ 10 ASTP13N95K3
- 100% avalanche tested
- Extremely high dv/dt capability
- Very low intrinsic capacitance
- Improved diode reverse recovery characteristics
- Zener-protected
Applications
- Switching applications
Description
These MDmesh K3 Power MOSFETs are the result of improvements applied to STMicroelectronics’ MDmesh technology, combined with a new optimized vertical structure. These devices boast an extremely low on-resistance, superior dynamic performance and high avalanche capability, rendering them suitable for the most demanding applications. TO-247 1 2 3 TAB TO-220 TO-220FP 1 2 2 3 D(2, TAB) G(1) S(3) AM01476v1_tab Product status link STF13N95K3 STP13N95K3 STW13N95K3 N‑channel 950 V, 680 mΩ typ., 10 A MDmesh K3 Power MOSFET in a TO-220FP, TO-220 and TO-247 packages STF13N95K3, STP13N95K3, STW13N95K3 Datasheet DS6262 - Rev 4 - January 2026 For further information, contact your local STMicroelectronics sales office.
1 Electrical ratings
Table 1. Absolute maximum ratings
- Pulse width is limited by safe operating area.
Table 2. Thermal data Table 3. Avalanche characteristics
2 Electrical characteristics
TC = 25 °C unless otherwise specified. Table 4. Static
- Specified by design, not tested in production.
Table 5. Dynamic
- Co(tr) is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to
- Co(er) is defined as a constant equivalent capacitance giving the same stored energy as Coss when VDS increases from 0 to
Table 6. Switching times Figure 23. Switching time waveform)
Electrical characteristics
Table 7. Source-drain diode
- Pulse width is limited by safe operating area.
- Pulse test: pulse duration = 300 µs, duty cycle 1.5%.
2.1 Electrical characteristics (curves)
Figure 1. Safe operating area for TO-220FP
100 V DS (V)
Figure 2. Normalized transient thermal impedance Figure 3. Safe operating area for TO-220 Figure 4. Normalized transient thermal impedance Figure 5. Safe operating area for TO-247 Figure 6. Normalized transient thermal impedance
Figure 13. Normalized gate threshold vs temperature Figure 14. Normalized on-resistance vs temperature Figure 15. Maximum avalanche energy vs temperature Figure 16. Normalized breakdown voltage vs temperature Figure 17. Typical reverse diode forward characteristics
0.95 T J = 50 °C
3 Test circuits
Figure 18. Test circuit for resistive load switching times Figure 19. Test circuit for gate charge behavior Figure 20. Test circuit for inductive load switching and Figure 21. Unclamped inductive load test circuit Figure 22. Unclamped inductive waveform Figure 23. Switching time waveform
4 Package information
To meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions, and product status are available at: www.st.com. ECOPACK is an ST trademark.
4.1 TO-220FP type B package information
Figure 24. TO-220FP type B package outline
Package information
Table 8. TO-220FP type B package mechanical data
4.2 TO-220 type A package information
Figure 25. TO-220 type A package outline
Table 9. TO-220 type A package mechanical data
4.3 TO-247 package information
Figure 26. TO-247 package outline
Table 10. TO-247 package mechanical data
5 Ordering information
Table 11. Order codes
Ordering information
Revision history
Table 12. Document revision history 15-May-2009 1 First release. 02-Sep-2010 2 Document status promoted from preliminary data to datasheet. Added new device in I2PAKFP. TO-220FPand I2PAKFP have been modified accordingly. Table 10: I2PAKFP mechanical data and Figure 26: I2PAKFP drawing have been added. Removed order code STFI13N95K3. Updated Section 4: Package information.
IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. In the event of any conflict between the provisions of this document and the provisions of any contractual arrangement in force between the purchasers and ST, the provisions of such contractual arrangement shall prevail. The purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. The purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of the purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. If the purchasers identify an ST product that meets their functional and performance requirements but that is not designated for the purchasers' market segment, the purchasers shall contact ST for more information. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2026 STMicroelectronics – All rights reserved STF13N95K3, STP13N95K3, STW13N95K3 DS6262 - Rev 4 page 18/18