STF130N10F3 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 23

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Package mechanical data
  • 6 Revision history

Features

■ Ultra low on-resistance ■ 100% avalanche tested

Applications

■ High current switching applications

Description

These devices are N-channel enhancement mode Power MOSFETs produced using STMicroelectronics’ STripFET™ III technology, which is specifically designed to minimize on- resistance and gate charge to provide superior switching performance. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Current limited by package.
  2. Pulse width limited by safe operating area.

VDD = 60 V for I2PAKFP and TO-220FP. Table 3. Thermal data

  1. When mounted on FR-4 board, on 1inch², 2oz Cu.

2 Electrical characteristics

Table 4. On/off states Table 5. Dynamic Table 6. Switching times

Table 7. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulse width limited by safe operating area
  3. Pulsed: pulse duration = 300 µs, duty cycle 1.5%

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area for TO-220FP Figure 3. Thermal impedance for TO-220FP Figure 4. Safe operating area for H²PAK-2 Figure 5. Thermal impedance for H²PAK-2 Figure 6. Output characteristics Figure 7. Transfer characteristics

Figure 8. Static drain-source on-resistance Figure 9. Static drain-source on-resistance Figure 10. Static drain-source on-resistance Figure 11. Normalized B VDSS vs temperature Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations

20 ID(A)

0 Qg(nC)

Figure 18. Source-drain diode forward

3 Test circuits

Figure 19. Switching times test circuit for Figure 20. Gate charge test circuit Figure 21. Test circuit for inductive load Figure 22. Unclamped inductive load test Figure 23. Unclamped inductive waveform Figure 24. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

Table 8. TO-220FP mechanical data

Figure 25. TO-220FP drawing

Figure 26. I 2PAKFP (TO-281) drawing Table 9. I 2PAKFP (TO-281) mechanical data

Table 10. H²PAK-2 mechanical data

Figure 27. H²PAK-2 drawing

Figure 28. H²PAK-2 recommended footprint (dimensions are in millimeters)

Table 11. TO-220 type A mechanical data

Figure 29. TO-220 type A drawing

5 Package mechanical data

Table 12. H²PAK-2 tape and reel mechanical data

6 Revision history

Table 13. Document revision history 24-Feb-2011 1 First version. 07-May-2012 2 Added Section 2.1: Electrical characteristics (curves). Updated Section 4: Package mechanical data.