STP11NM65N STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 21

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

  • 100% avalanche tested
  • Low input capacitance and gate charge
  • low gate input resistance

Applications

  • Switching applications

Description

These devices are N-channel Power MOSFETs developed using the second generation of MDmesh™ technology. This revolutionary Power MOSFET associates a vertical structure to the company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters. DPAK TAB TAB TO-220 TO-220FP I²PAKFP 1 2 $0Y Ć7$% Order codes VDSS @ TJmax RDS(on) max ID STD11NM65N 710 V < 0.455 Ω 11 A STF11NM65N STFI11NM65N STP11NM65N Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Limited by maximum junction temperature.
  2. Pulse width limited by safe operating area.

Table 3. Thermal data

  1. When mounted on 1inch² FR-4 board, 2 oz Cu

2 Electrical characteristics

Table 4. On /off states Table 5. Dynamic

  1. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as C oss when VDS

Table 6. Switching times Table 7. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area for DPAK Figure 3. Thermal impedance for DPAK Figure 4. Safe operating area for TO-220FP and Figure 5. Thermal impedance for TO-220FP and Figure 6. Safe operating area for TO-220 Figure 7. Thermal impedance for TO-220

3 Test circuits

Figure 18. Switching times test circuit for Figure 19. Gate charge test circuit Figure 20. Test circuit for inductive load Figure 21. Unclamped inductive load test circuit Figure 22. Unclamped inductive waveform Figure 23. Switching time waveform

4 Package mechanical data

specifications, grade definitions and product status are available at: www.st.com. Table 8. DPAK (TO-252) mechanical data

Table 9. TO-220FP mechanical data

Figure 26. TO-220FP drawing

Table 10. I2PAKFP (TO-281) mechanical data

Figure 27. I2PAKFP (TO-281) drawing

Table 11. TO-220 type A mechanical data

Figure 28. TO-220 type A drawing

5 Packaging mechanical data

Table 12. DPAK (TO-252) tape and reel mechanical data

6 Revision history

Table 13. Document revision history 01-Jun-2007 1 First release. Document status promoted from preliminary to production data.