STD10NM60N STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 17

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

■ 100% avalanche tested ■ Low input capacitance and gate charge ■ Low gate input resistance Application Switching applications

Description

These devices are N-channel 600 V Power MOSFET realized using the second generation of MDmesh ™ technology. It applies the benefits of the multiple drain process to STMicroelectronics’ well-known PowerMESH ™ horizontal layout structure. The resulting product offers improved on-resistance, low gate charge, high dv/dt capability and excellent avalanche characteristics. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Limited only by maximu m temperature allowed.
  2. Pulse width limited by safe operating area.

Table 3. Thermal data Table 4. Avalanche characteristics

2 Electrical characteristics

Table 5. On /off states Table 6. Dynamic

  1. C oss eq. time related is defined as a constant equivalent capacitance giving the same charging time as Coss

Table 7. Switching times Table 8. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area for TO-220 Figure 3. Thermal impedance for TO-220 Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for DPAK, IPAK Figure 7. Thermal impedance for DPAK, IPAK

Figure 8. Output characteristics Figure 9. Transfer characteristics Figure 10. Normalized BV DSS vs temperature Figure 11. Static drain-source on resistance Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations

1.07 ID=1mA

Figure 14. Normalized gate threshold voltage Figure 15. Normalized on resistance vs

1.9 ID=4A

3 Test circuits

Figure 16. Switching times test circuit for Figure 17. Gate charge test circuit Figure 18. Test circuit for inductive load Figure 19. Unclamped inductive load test Figure 20. Unclamped inductive wavefo rm Figure 21. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

Figure 22. TO-220FP drawing Table 9. TO-220FP mechanical data

DIM. mm. .xampyt.nim 04.202.2A 01.109.01A 32.030.02A 09.046.0b 04.502.54b 06.054.0c 06.084.02c 02.600.6D 01.51D 06.604.6E 07.41E 82.2e 06.404.41e 01.0153.9H 08.21L 08.02L 106.04L 02.0R V2 0 o 8 o TO-252 (DPAK) mechanical data 0068772_G

TO-220 type A mechanical data Dim mm Min Typ Max A 4.40 4.60 b 0.61 0. 88 b1 1.14 1.70 c0 . 4 8 0.70 D 15.25 15.75 D1 1.27 E1 0 1 0 . 4 0 e 2.40 2.70 e1 4. 95 5.15 F1 . 2 3 1.32 H1 6.20 6.60 J1 2.40 2.72 L1 3 14 L1 3.50 3.93 L20 16.40 L302 8.90 ∅P 3.75 3.85 Q 2.65 2. 95 0015988_Rev_S

DIM. mm. min. typ max. A 2.20 2.40 A1 0. 901 . 1 0 b 0.64 0. 90 b2 0.95 b4 5.20 5.40 c 0.45 0.60 c2 0.4 8 0.60 D 6.00 6.20 E 6.40 6.60 e2 . 2 8 e1 4.40 4.60 H 16.10 L 9.00 9.40 (L1) 0. 801 . 2 0 L2 0. 80 V1 10 o TO-251 (IPAK) mechanical data 0068771_H

STD10NM60N, STF10NM60N, STP10NM60N, STU10NM60N Packaging mechanical data Doc ID 15764 Rev 5 15/17

5 Packaging mechanical data

DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0.795 G 16.4 18.4 0.645 0.724 N 50 1.968 T 22.4 0.881 BASE QTY BULK QTY 2500 2500 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 12.1 0.476 D 1.5 1.6 0.059 0.063 D1 1.5 0.059 E 1.65 1.85 0.065 0.073 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 P0 3.9 4.1 0.153 0.161 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 1.574 W 15.7 16.3 0.618 0.641 TAPE MECHANICAL DATA All dimensions are in millimeters

6 Revision history

Table 10. Document revision history