STD10NM50N STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 18

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

■ 100% avalanche tested ■ Low input capacitance and gate charge ■ Low gate input resistance

Applications

■ Switching applications

Description

These devices are N-channel Power MOSFETs developed using the second generation of MDmesh™ technology. This revolutionary Power MOSFET associates a vertical structure to the company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Limited by maximum junction temperature.
  2. Pulse width limited by safe operating area
  3. I SD ≤ 7 A, di/dt ≤ 400 A/µs, VDD = 80% V(BR)DSS, VDSpeak ≤ V(BR)DSS

Table 3. Thermal data

  1. When mounted on 1inch² FR-4 board, 2 oz Cu

Table 4. Avalanche characteristics

2 Electrical characteristics

Table 5. On/off states Table 6. Dynamic

  1. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS

increases from 0 to 80% VDS.

Table 7. Switching times Table 8. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area for DPAK Figure 3. Thermal impedance for DPAK Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for TO-220 Figure 7. Thermal impedance for TO-220

3 Test circuits

Figure 17. Switching times test circuit for Figure 18. Gate charge test circuit Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test Figure 21. Unclamped inductive wavefor m Figure 22. Switching time waveform

4 Package mechanical data

specifications, grade definitions and product status are available at: www.st.com. Table 9. DPAK (TO-252) mechanical data

Figure 25. TO-220FP drawing Table 10. TO-220FP mechanical data

Table 11. TO-220 type A mechanical data

Figure 26. TO-220 type A drawing

5 Packaging mechanical data

Table 12. DPAK (TO-252) tape and reel mechanical data

6 Revision history

Table 13. Document revision history 16-Dec-2009 1 First release. 08-Sep-2010 2 Document status promoted from preliminary data to datasheet. Updated VDSS (@Tjmax) in cover page.