STP100N10F7 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 23

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

  • Ultra low on-resistance
  • 100% avalanche tested

Applications

  • Switching applications

Description

These devices utilize the 7th generation of design rules of ST’s proprietary STripFET™ technology, with a new gate structure. The resulting Power MOSFET exhibits the lowest R DS(on) in all packages. TO-220 TAB DPAK TO-220FP TAB D2PAK TAB $0Y Ć7$% Order codes V DS RDS(on) max ID PTOT STB100N10F7 100 V 0.008 Ω

80 A 120 W

Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. This value is limited by package. .
  2. Pulse width limited by safe operating area.

Table 3. Thermal resistance

  1. When mounted on FR-4 board of 1inch², 2oz Cu, t < 10 sec

Table 4. Avalanche characteristics

2 Electrical characteristics

Table 5. On/off states Table 6. Dynamic Table 7. Switching times

Table 8. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration=300 μs, duty cycle 1.5%

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area for DPAK Figure 3. Thermal impedance for DPAK Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for D2PAK and Figure 7. Thermal impedance for D2PAK and

Figure 8. Output characteristics Figure 9. Transfer characteristics Figure 10. Normalized V(BR)DSS vs temperature Figure 11. Static drain-source on-resistance Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations

14.0 VGS=10V

3 Test circuits

Figure 17. Switching times test circuit for Figure 18. Gate charge test circuit Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test circuit Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform

4 Package mechanical data

specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Figure 23. D²PAK (TO-263) drawing

Figure 24. D²PAK footprint(a)

Table 9. DPAK (TO-252) mechanical data

Figure 25. DPAK (TO-252) drawing

Figure 26. DPAK footprint (b)

Table 10. TO-220FP mechanical data

Figure 27. TO-220FP drawing

Table 11. TO-220 type A mechanical data

Figure 28. TO-220 type A drawing

5 Packaging mechanical data

Table 12. D²PAK (TO-263) tape and reel mechanical data Table 13. DPAK (TO-252) tape and reel mechanical data

Figure 29. Tape Table 13. DPAK (TO-252) tape and reel mechanical data (continued)

Figure 30. Reel

6 Revision history

Table 14. Document revision history 05-Oct-2012 1 First release. – Inserted device in TO-220FP. resistance and Table 5: On/off states accordingly. Source drain diode and Section 4: Package mechanical data. – Added Section 5: Packaging mechanical data. resistance and Table 5: On/off states accordingly. and Section 5: Packaging mechanical data.