STD7N60M6 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 15

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package information
  • 4.1 DPAK (TO-252) type C package information
  • 4.2 DPAK (TO-252) packing information

Features

Order code VDS RDS(on) max. ID PTOT STD7N60M6 600 V 900 mΩ 5 A 72 W

  • Reduced switching losses
  • Lower R DS(on) per area vs previous generation
  • Low gate input resistance
  • 100% avalanche tested
  • Zener-protected

Applications

  • Switching applications
  • LLC converters
  • Boost PFC converters

Description

The new MDmesh M6 technology incorporates the most recent advancements to the well-known and consolidated MDmesh family of SJ MOSFETs. STMicroelectronics builds on the previous generation of MDmesh devices through its new M6 technology, which combines excellent RDS(on) per area improvement with one of the most effective switching behaviors available, as well as a user-friendly experience for maximum end-application efficiency. Product status link STD7N60M6 Product summary Order code STD7N60M6 Marking 7N60M6 Package DPAK Packing Tape and reel N-channel 600 V, 780 mΩ typ., 5 A, MDmesh M6 Power MOSFET in a DPAK package STD7N60M6 Datasheet DS13112 - Rev 2 - July 2020 For further information contact your local STMicroelectronics sales office.

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Pulse width is limited by safe operating area.
  2. Pulse width limited by T jmax.

Table 2. Thermal data

  1. When mounted on an 1-inch² FR-4, 2 Oz copper board.

2 Electrical characteristics

(Tcase = 25 °C unless otherwise specified) Table 3. Static

  1. Defined by design, not subject to production test.

Table 4. Dynamic

  1. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0

Table 5. Switching times Figure 18. Switching time

Electrical characteristics

Table 6. Source-drain diode

  1. Pulse width is limited by safe operating area.
  2. Pulse test: pulse duration = 300 µs, duty cycle 1.5%.

2.1 Electrical characteristics (curves)

Figure 1. Safe operating area Figure 2. Maximum transient thermal impedance Figure 3. Typical output characteristics Figure 4. Typical transfer characteristics Figure 5. Typical gate charge characteristics Figure 6. Typical drain-source on-resistance

3 Test circuits

Figure 13. Test circuit for resistive load switching times Figure 14. Test circuit for gate charge behavior Figure 15. Test circuit for inductive load switching and Figure 16. Unclamped inductive load test circuit Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform

4 Package information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

4.1 DPAK (TO-252) type C package information

Figure 19. DPAK (TO-252) type C package outline

Package information

Table 7. DPAK (TO-252) type C mechanical data

Figure 20. DPAK (TO-252) recommended footprint (dimensions are in mm)

4.2 DPAK (TO-252) packing information

Figure 21. DPAK (TO-252) tape outline

Figure 22. DPAK (TO-252) reel outline Table 8. DPAK (TO-252) tape and reel mechanical data

Revision history

Table 9. Document revision history 21-Oct-2019 1 First release. 28-Jul-2020 2 Remove of DPAK (TO-252) type A package information.