STD70N6F3 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

■ Standard threshold drive ■ 100% avalanche tested Application ■ Switching applications

Description

This STripFET™ III Power MOSFET technology is among the latest improvements, which have been especially tailored to minimize on-state resistance providing superior switching performance. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Pulse width limited by safe operating area
  2. I SD ≤ 70 A, di/dt ≤ 300 A/µs, VDD ≤ V(BR)DSS. Tj ≤ Tjmax

Table 3. Thermal resistance

  1. When mounted on FR-4 board of 1inch², 2oz Cu.

2 Electrical characteristics

Table 4. Static Table 5. Dynamic

  1. Pulsed: pulse duration = 300µs, duty cycle 1.5%

Table 6. Switching on/off (inductive load) Table 7. Source drain diode

  1. Pulsed: pulse duration = 300µs, duty cycle 1.5%

3 Test circuits

Figure 2. Switching times test circuit for Figure 3. Gate charge test circuit Figure 4. Test circuit for inductive load Figure 5. Unclamped inductive load test Figure 6. Unclamped inductive wavefo rm Figure 7. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

DIM. mm. .xampyt.nim 04.202.2A 01.109.01A 32.030.02A 09.046.0b 04.502.54b 06.054.0c 06.084.02c 02.600.6D 01.51D 06.604.6E 07.41E 82.2e 06.404.41e 01.0153.9H 08.21L 08.02L 106.04L 02.0R V2 0 o 8 o TO-252 (DPAK) mechanical data 0068772_G

STD70N6F3 Packaging mechanical data Doc ID 16908 Rev 1 9/11

5 Packaging mechanical data

DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0.795 G 16.4 18.4 0.645 0.724 N 50 1.968 T 22.4 0.881 BASE QTY BULK QTY 2500 2500 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 12.1 0.476 D 1.5 1.6 0.059 0.063 D1 1.5 0.059 E 1.65 1.85 0.065 0.073 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 P0 3.9 4.1 0.153 0.161 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 1.574 W 15.7 16.3 0.618 0.641 TAPE MECHANICAL DATA All dimensions are in millimeters

6 Revision history

Table 8. Revision history