STBACI0320K SCHNEIDER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

standard analog input kit STB - 4..20 mA - 4 I - 15 bits + sign STBACI0320K Main Range of product Modicon STB distributed I/O solution Product or component type Standard analog input kit Kit composition STBXTS2100, 6-terminal spring clamp connector STBXTS1100, 6-terminal screw type connector STBXBA2000 base STBACI0320 module Analogue input type Current 0...20 mA Current 4...20 mA Analogue input number 4 Analogue input resolution 15 bits + sign Type of filter Single low pass input filter 985 Hz Complementary Absolute maximum input 25 mA/50 V DC Cold swapping Yes Hot swapping fallback Yes for standard NIMs Fallback status State 0 basic NIMs User configurable standard NIMs Data format IEC 61131-2 EN 61131-2 Update time 10 ms Integral linearity +/- 0.05 %FS Input impedance 250 Ohm Maximum supply current for sensors 25 mA per input channels Protection type Short-circuit protection Absolute accuracy error +/- 0.4 % of full scale 25 °C Temperature drift +/-0.005 %/°C Insulation between channels and logic bus

1780 V for 1 minute

Insulation between channels and sensor bus 200 V Addressing requirement 8 input words Product compatibility Mounting base STBXBA2000 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Apr 8, 2022

Power distribution module STBPDT3100/3105 [Us] rated supply voltage 24 V DC Supply Power distribution module Current consumption 95 mA at 5 V DC for logic bus Marking CE Overvoltage category II Status LED 1 LED (green)module status (RDY)

1 LED (red)module error (ERR)

Height 18.4 mm Width 128.3 mm Environment Product certifications CSA UL FM Class 1 Division 2 ATEX Cat 3G C-Tick Pollution degree 2 conforming to IEC 60664-1 Operating altitude <= 2000 m IP degree of protection IP20 conforming to EN 61131-2 class 1 Ambient air temperature for operation -25…70 °C Ambient air temperature for operation 32...140 °F without derating Ambient air temperature for storage -40…85 °C without derating Ambient air temperature for storage -40...185 °F without derating Relative humidity 95 % at 60 °C without condensation Vibration resistance +/-0.35 mm at 10…58 Hz 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail Shock resistance 30 gn for 11 ms conforming to IEC 88 reference 2-27 Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Weight 146.0 g Package 1 Height 2.7 cm Package 1 width 13 cm Package 1 Length 8 cm Unit Type of Package 2 S02 Number of Units in Package 2 28 Package 2 Weight 4.514 kg Package 2 Height 15 cm Package 2 width 30 cm Package 2 Length 40 cm Apr 8, 2022

Offer Sustainability Sustainable offer status Green Premium product REACh Regulation REACh Declaration EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information WEEE The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Contractual warranty Warranty 18 months Apr 8, 2022

Apr 8, 2022

4 isolated analog sensors, external 24 VDC power supply Pin Top Connections Bottom Connections 1 current in 1 + current in 3 + 2 current in 1 - current in 3 - 3 no connection no connection 4 no connection no connection 5 current in 2 + current in 4 + 6 current in 2 - current in 4 - Apr 8, 2022