STB60NF06L_06 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 16

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Packing mechanical data
  • 6 Revision history

N-channel 60V - 0.012Ω - 60A - TO-220/D2PAK/TO-220FP STripFET™ II Power MOSFET General features ■ Exceptional dv/dt capability ■ 100% avalanche tested ■ Application oriented characterization ■ 175°C operating range ■ Low threshold drive

Description

This Power MOSFET series realized with STMicroelectronics unique STripFET process has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced high- efficiency isolated DC-DC converters for Telecom and Computer application. It is also intended for any application with low gate charge drive requirements.

Applications

■ Switching application Internal schematic diagram Type V DSS RDS(on) ID STB60NF06L 60V <0.014 Ω 60 STP60NF06L 60V <0.014 Ω 60A STP60NF06LFP 60V <0.014 Ω 60A(1) 1. Refer to SOA for the max allowable current values on FP-type due to Rth value D2PAK TO-220FP TO-220 Order codes Part number Marking Package Packaging STB60NF06LT4 B60NF06L D 2PAK Tape & reel STP60NF06L P60NF06L TO-220 Tube STP60NF06LFP P60NF06LFP TO-220FP Tube

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Refer to SOA for the max allowable current values on FP-type due to Rth value
  2. Pulse width limited by safe operating area.

Table 2. Thermal data

  1. Only for SMD, When mounted on 1 inch2 FR-4 board, 2 oz of Cu.

2 Electrical characteristics

Table 3. On/off states Table 4. Dynamic

  1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.

Table 5. Source drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %

2.1 Electrical characte ristics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Output characterisics Figure 6. Transfer characteristics

3 Test circuit

Figure 15. Switching times test circuit for Figure 16. Gate charge test circuit Figure 17. Test circuit for inductive load Figure 18. Unclamped Inductive load test Figure 19. Unclamped inductive wavefo rm Figure 20. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

DIM. mm. inch A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 D1 8 0.315 E 10 10.4 0.393 E1 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R0 . 4 0 . 0 1 5 V2 0º 4º D2PAK MECHANICAL DATA

DIM. mm. inch A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L30 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 TO-220 MECHANICAL DATA

A B D E H G F 123F2 L4L5 DIM. mm. inch A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 TO-220FP MECHANICAL DATA

Packing mechanical data STB60NF06L - STP60NF06L - STP60NF06LFP

5 Packing mechanical data

  • on sales type DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0795 G 24.4 26.4 0.960 1.039 N 100 3.937 T 30.4 1.197 BASE QTY BULK QTY 1000 1000 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 TAPE MECHANICAL DATA

6 Revision history

Table 6. Revision history