STA-5063Z SIRENZA | Alldatasheet

Document overview

  • Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for in accuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at t he user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2002 Sirenza Microdevices, Inc. All worldwide rights reserved. 303 S. Technology Court Phone: (800) SMI-MMIC http://www.sirenza.com Broomfield, CO 80021 1 EDS-102990 Rev F Sirenza Microdevices’ STA-5063Z is a general purpose class A linear amplifier which utilizes InGaP GaAs Heterojunction Bipolar Transistor (HBT) amplifier housed in a low-cost sur- face-mountable plastic package. This product is specifically designed as a driver amplifier for WLAN 802.11a and 5.8GHz ISM band and 3.3-3.8GHz fixed wireless applications. It can run from a fixed 3.0-3.6V supply with its on chip active bias net- work which includes a power up and down control. On-chip impedance matching circuitry provides a 50Ω nominal RF input and output impedance. Its high linearity makes it an ideal choice for multicarrier and digital applications. Housed in an industry standard SOT-363 package, it has no blind solder joints and designed for low cost. This product is offered in a RoHS Compliant and Green package with matte tin finish, des- ignated by the “Z” package suffix. Key Specifications Symbol Parameters: Test Conditions Evaluation Board, Z0 = 50Ω, VCC = 3.3V, Iq = 52mA, T = 25ºC Unit Min. Typ. Max. fO Frequency of Operation GHz 3.3 6.2 P1dB Pout at 1dB Compression – 3.5 GHz with 3GHz app circuit dBm 17.5 Pout at 1dB Compression – 5.1 GHz with 5GHz app circuit 15 Pout at 1dB Compression – 5.9 GHz with 5GHz app circuit 13.5 15 S Small Signal Gain – 3.5 GHz with 3.5GHz app circuit dB 17.5 19 21 Small Signal Gain – 5.1 GHz with 5GHz app circuit 14.3 15.8 17.8 Small Signal Gain – 5.9 GHz with 5GHz app circuit 13.4 14.9 16.9 VSWR In Input VSWR 5.1-5.9GHz for 5GHz app circuit - 1.5 2.0 VSWR Out Output VSWR 5.1-5.9GHz for 5GHz app circuit - 2.0 2.6 OIP3 Output Third Order In tercept @ 3.5GHz dBm 28 30 OIP3 Output Third Order In tercept @ 5.9GHz dBm 25 27 NF Noise Figure @ 5.9 GHz dB 9 10.5 I SUPPLY Total Device Current mA 42 52 62 Rth, j-l Thermal Resistance (junction - lead) ºC/W 150 Functional Block Diagram STA-5063Z 3.3 – 6.2 GHz General Purpose 3.3V 15dBm Amplifier

Applications

  • Linear Class A Performance
  • P1dB = 17.5dBm @ 3.5GHz
  • P1dB = 15dBm @ 5.9GHz
  • IP3 = 30dBm @ 3.5GHz
  • IP3 = 27dBm @ 5.9GHz
  • Power up/down control < 1μs
  • Active Bias controlled
  • Robust Class 1C ESD rating
  • Driver stage for 802.11a Access Points
  • Wimax 802.16 Driver stage
  • Low Power 5.8GHz ISM Output stage
  • Fixed Wireless, UNII driver stage Product Description SOT-363 2mm x 2.1mm Active Bias RFIN & VPC GND VCC RFOUT GND GND Product Features Pb RoHS Compliant & PackageGreen

303 S. Technology Court Phone: ( 800) SMI-MMIC http://www.sirenza.com Broomfield, CO 80021 2 EDS-102990 Rev F STA-5063Z 3.3-6.2GHz 15dBm Amplifier Pin Out Description Pin # Function Description

1 RFIN / VPC

RF input pin and power up down control. Supply VPC = 3.3V thru a 4.7Kohm resistor to this pin. For more gain (~0.3dB), a 5.6nH inductor can also be used in place of the resistor. If an inductor is used, move the 4.7k resistor towards the DC supply, but still in series with pin1. A minimum 1k series resitance is required on this pin from the DC supply. VPC less than 2V shuts off the amplifier. 2,5,6 Ground Put GND vias as close as possible to these pins. It is recommended to use the via pattern in out eval board layout and recommended land pattern 3V C C This provides Vcc to the active bias circuit and supplies the Vcc1 collector voltage of the first stage. This pin needs to be bypassed with capacitors as close as possible to the pin. Two 0402 100pF capacitors are recom- mended in parallel to lower the inductance to GND thru the caps. 4 RFOUT Rf output for the amplifier and Vcc2 for the second stage. Caution: ESD Sensitive Appropriate precaution in handling, packaging and testing devices must be observed. Simplified Device Schematic Absolute Maximum Ratings Parameters Value Unit ESD Rating (HBM) 1000 V Total Device Current (I) 80 mA Device Voltage (Pins 1 and 3) 4 V Device Voltage (Pin 4) 5.5 V Power Dissipation 0.40 W Operating Lead Temperature (T L) -40 to +85 ºC RF Input Power 15 dBm Storage Temperature Range -40 to +150 ºC Operating Junction Temperature (T J) +150 ºC Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias conditions should also satisfy the following expression: IDVD < (TJ - TL) / RTH’ j-l Activ e Bias PIN 1 PIN 2 PIN 5 PIN 6 PIN 3 PIN 4

303 S. Technology Court Phone: ( 800) SMI-MMIC http://www.sirenza.com Broomfield, CO 80021 3 EDS-102990 Rev F STA-5063Z 3.3-6.2GHz 15dBm Amplifier 5.1-5.9 GHz Evaluation Board Data (Vcc=VBIAS = 3.3V, Iq = 52mA) OIP3 vs Freq vs Temp at Vs=3.3V, Pout=-7.5dBm/tone Freq(GHz) OIP3(dBm) T=-40C T=25C T=85C Noise Figure vs Freq at Vs=3.3V 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 Freq(GHz) NF(dB) T=-40C T=25C T=85C Wide Band Gain and Return Loss vs Freq at Vs=3.3V, Tbp=25C -25 -20 -15 -10 0123456789 1 0 Freq(GHz) Gain/RL(dB) IN RL OUT RL GAIN Gain vs Freq vs Vcc at T=25C 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 Freq(GHz) Gain(dB) Vcc=3.0V Vcc=3.3V Vcc=3.6V Gain vs Freq vs Temp at Vs=3.3V 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 Freq(GHz) Gain(dB) T=-40C T=25C T=85C Iq vs Vsupply (Vcc) Vcc(V) Iq(mA) T=-40C T=25C T=85C

303 S. Technology Court Phone: ( 800) SMI-MMIC http://www.sirenza.com Broomfield, CO 80021 4 EDS-102990 Rev F STA-5063Z 3.3-6.2GHz 15dBm Amplifier 4.9 - 5.9 GHz 802.11a Error Vector Magnitude Data (source EVM = 0.7%) EVM vs Pout, F=4.9GHz 802.11a, OFDM, 54 Mb/s, 64QAM 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 -5 0 5 10 Pout(dBm) EVM(%) EVM vs Pout, F=5.15GHz 802.11a, OFDM, 54 Mb/s, 64QAM 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 -5 0 5 10 Pout(dBm) EVM(%) EVM vs Pout, F=5.35GHz 802.11a, OFDM, 54 Mb/s, 64QAM 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 -5 0 5 10 Pout(dBm) EVM(%) EVM vs Pout, F=5.725GHz 802.11a, OFDM, 54 Mb/s, 64QAM 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 -5 0 5 10 Pout(dBm) EVM(%) EVM vs Pout, F=5.875GHz 802.11a, OFDM, 54 Mb/s, 64QAM 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 -5 0 5 10 Pout(dBm) EVM(%)

303 S. Technology Court Phone: ( 800) SMI-MMIC http://www.sirenza.com Broomfield, CO 80021 5 EDS-102990 Rev F STA-5063Z 3.3-6.2GHz 15dBm Amplifier 5.1 - 5.9 GHz Evaluation Board Schematic for 3.3V RF IN RF OUT ON ECB 103073 SMDI REV A 5.1 - 5.9 GHz Evaluation Board - Board material GETEK, 21mil thick, Dk=4.2, 2 oz. copper 5.6nH INDUCTOR, 0603 3.9pF CAP, 0603 1000pF CAP, 0603 4.7K OHM, 0603 1uF 16V TANTALUM CAP Q1 STA-5063 DESG DESCRIPTION 1.5pF CAP, 0603 1000pF CAP, 0603 100pF CAP, 0402 100pF CAP, 0402

303 S. Technology Court Phone: ( 800) SMI-MMIC http://www.sirenza.com Broomfield, CO 80021 6 EDS-102990 Rev F STA-5063Z 3.3-6.2GHz 15dBm Amplifier 3GHz Tune Gain +25c Frequency(GHz) s21(dB) 3GHz Tune Input Return Loss +25c -20 -18 -16 -14 -12 -10 Frequency(GHz) s11(dB) 3GHz Tune Output Return Loss +25c -20 -15 -10 Frequency(GHz) s22(dB) 3GHz Tune IP3 & P1dB Freqeuncy(GHz) P1dB OIP3 (dB) P1 dB IP3 3.3-3.8 GHz Evaluation Board Data (Vcc=VBIAS = 3.3V, Iq = 52mA)

303 S. Technology Court Phone: ( 800) SMI-MMIC http://www.sirenza.com Broomfield, CO 80021 7 EDS-102990 Rev F STA-5063Z 3.3-6.2GHz 15dBm Amplifier 3.3 - 3.8 GHz Evaluation Board Schematic for 3.3V 3.3 - 3.8 GHz Evaluation Board - Board material GETEK, 21mil thick, Dk=4.2, 2 oz. copper C5 R2

303 S. Technology Court Phone: ( 800) SMI-MMIC http://www.sirenza.com Broomfield, CO 80021 8 EDS-102990 Rev F STA-5063Z 3.3-6.2GHz 15dBm Amplifier Package Outline Drawing 1.30 (0.051) REF. 1.35 (0.053) 1.15 (0.045) 2.20 (0.087) 2.00 (0.079) 0.650 BSC (0.025) 2.20 (0.087) 1.80 (0.071) 1.00 (0.039) 0.80 (0.031) 0.25 (0.010) 0.15 (0.006) 0.10 (0.004) 0.00 (0.00) 0.425 (0.017) TYP. 0.20 (0.0080 0.10 (0.004) 0.30 (0.012) 0.10 (0.0040 0.30 REF. 10° Part Number Ordering Information Part Number Reel Size Devices/Reel STA-5063Z 7in 3000 Part Marking The part will be symbolized with an “T50Z” marking designator on the top surface of the package. 0.026 0.075 0.016 0.035 Recommended Land Pattern: Part Marking: 1 3 T50Z