ST60-48MF SHINDENGEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
外形図については新電元 Web サイト又は 〈半導体製品一覧表〉 をご参照 下さい。捺印表示については捺印仕様をご確認下さい。 For details of outline dimensions, refer to our web site or the Semiconductor Short Form Catalog. As for the marking, refer to the specification “Marking,Terminal Connection.” ■定格表 RATINGS ＊Sine wave は 50Hz で測定しています。 ＊50Hz sine wave is used for measurements. ＊半導体製品の特性は一般的にバラツキを持っております。 Typical は統計的な実力を表しています。 ＊Semiconductor products generally have characterristic variation. Typical a statistical average of the devices ability. ■特性図 CHARACTERISTIC DIAGRAMS
- 絶対最大定格 Absolute Maximum Ratings（指定のない場合 T1＝25℃／unless otherwise specified）
- 電気的・熱的特性 Electrical Characteristics（指定のない場合 T1＝25℃／unless otherwise specified） ST60-48MF 項 目 Item 記号 Symbol 条件 Conditions 規格値 Ratings 単位 Unit 保存温度 Storage temperature Tstg －40～150 ℃ 接合部温度 Operating junction temperature Tj 150 ℃ 定格電力 Average rectified forward power P T1 ＝ 25℃ 5 w せん頭サージ逆電力 Maximum surge reverse Power PRSM 10/1000 μ s 非繰り返し 10/1000 μ s Non-repetitive 6000 w10/10000 μ s 非繰り返し 10/10000 μ s Non-repetitive 3000 せん頭サージ逆電流 Maximum surge reverse current IRSM 10/1000 μ s 非繰り返し 10/1000 μ s Non-repetitive 100 A10/10000 μ s 非繰り返し 10/10000 μ s Non-repetitive 55 連続印加電圧 Maximum reverse voltage VRM 40 V 動作開始電圧 Breakdown Voltage VBR IR=1mA，パルス測定 IR=1mA，Pulse measurement Min. 43.2 Max. 54.0 V 制限電圧 Clamping voltage VCL IPP=100A 10/1000 μ s exp 波 IPP=100A 10/1000 μ s exponential wave Max. 60 V 漏れ電流 Leakage current IR VR=40V，パルス測定 VR=40V，Pulse measurement Max. 5 μA 順方向電圧 Forward voltage VF IF=30A，パルス測定 IF=30A，Pulse measurement Max. 1.3 V 温度係数 Temperture coefficient rz Max. 0.15 ％ /℃ Package : MCP 6OJUNN 8FJHIUH ST60-48MFPower zener Diode 大容量面実装デバイス 単体 Power Surface Mount Device Single Zener Diode MCP Package ST60-48MF_1 ˆ ЖT 5:1 40V 6000W 特 長 ・5Wクラス ・面実装 ・車載用途も対応可能 Feature ・5W Class ・SMD Package ・Available for automotive use ■外形図 OUTLINE
͝ ҙ ͞ΕΔಛ ೝΛಘͯԼ͍͞ɻ ͷ ʲඪ४༻్ʳ ίϯϐϡʔλɺOAɺAVɺՈిɺ ʲಛผ༻్ʳ ࡂ/ɺҩྍ ʲಛఆ༻్ʳ ͷͨΊͷஔɺγεςϜ 3.ࢭ Ͱ͖ΔΑ͏͝ ౼Լ͍͞ɻ ೝԼ͍͞ɻ ͍·ͤΜɻ 6.͏ͷ Ͱ͋Γ·ͤΜɻ 7.ɺ༌ग़ʹಉ Մ͕ඞཁͰ͢ɻ Notes 1. If you wish to use any such product, please be sure to refer to the specifications issued by Shindengen. 2. All products described or contained herein are designed with a quality level intended for use in standard applications requiring an ordinary level of reliability. If these products are to be used in equipment or devices for special or specific applications requiring an extremely high grade of quality or reliability in which failures or malfunctions of products may directly affect human life or health, a local Shindengen office must be contacted in advance to confirm that the intended use of the product is appropriate. Shindengen products are grouped into the following three applications according the quality grade. ʲStandard applicationsʳ Computers, office automation and other office equipment, communication terminals, test and measurement equipment, audio/visual equipment, amusement equipment, consumer electronics, machine tools, personal electronic equipment, industrial equipment, etc. ʲSpecial applicationsʳ Transportation equipment (vehicles, ships, etc.), trunk-line communication equipment, traffic signal control systems, anti-disaster/crime systems, safety equipment, medical equipment, etc. ʲSpecific applicationsʳ Nuclear reactor control systems, aircraft, aerospace equipment, submarine repeaters, life support equipment and systems, etc. 3. Although Shindengen continuously endeavors to enhance the quality and reliability of its products, customers are advised to consider and take safety measures in their design, such as redundancy, fire containment and anti-failure, so that personal injury, fires, or societal damages can be prevented. 4. Please note that all information described or contained herein is subject to change without notice due to product upgrades and other reasons. When buying Shindengen products, please contact the Company\s offices or distributors to obtain the latest information. 5. Shindengen shall not bear any responsibility with regards to damages or infringement of any third-party patent rights and other intellectual property rights incurred due to the use of information on this website. 6. The information and materials on this website neither warrant the use of Shindengen's or any third party\s patent rights and other intellectual property rights, nor grant license to such rights. 7. In the event that any product described or contained herein falls under the category of strategic products controlled under the Foreign Exchange and Foreign Trade Control Law of Japan, exporting of such products shall require an export license from the Japanese government in accordance with the above law. 8. No reprinting or reproduction of the materials on this website, either in whole or in part, is permitted without proper authorization from Shindengen.