ST450RAB474JLZ

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

© Coilcraft, Inc. 2012

1102 Silver Lake Road

Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information.

1812 CHIP INDUCTORS

Inductance2 L test Percent Q Q test SRF min4 DCR max5 Imax Part number1 (µH) freq (MHz) tolerance min3 freq (MHz) (MHz) (Ohms) (mA) ST450RAB123JLZ 12 2.5 5 22 0.79 55 2.0 280 ST450RAB153JLZ 15 2.5 5 22 0.79 45 2.5 260 ST450RAB183JLZ 18 2.5 5 24 0.79 37 2.8 240 ST450RAB223JLZ 22 2.5 5 20 0.79 32 3.2 210 ST450RAB273JLZ 27 2.5 5 24 0.79 27 3.6 200 ST450RAB333JLZ 33 2.5 5 22 0.79 23 4.0 190 ST450RAB393JLZ 39 2.5 5 20 0.79 19 4.5 185 ST450RAB473JLZ 47 2.5 5 24 0.79 16 5.0 180 ST450RAB563JLZ 56 2.5 5 22 0.79 13 5.5 170 ST450RAB683JLZ 68 2.5 5 24 0.79 10 6.0 150 ST450RAB823JLZ 82 2.5 5 24 0.79 9.0 7.0 135 ST450RAB104JLZ 100 2.5 5 24 0.79 8.5 8.0 135 ST450RAB124JLZ 120 0.79 5 25 0.79 8.5 11.5 110 ST450RAB154JLZ 150 0.79 5 23 0.79 8.5 13.0 100 ST450RAB184JLZ 180 0.79 5 24 0.79 8.0 14.2 85 ST450RAB224JLZ 220 0.79 5 23 0.79 6.0 16.2 80 ST450RAB274JLZ 270 0.79 5 23 0.79 5.0 20.5 75 ST450RAB334JLZ 330 0.79 5 24 0.79 4.5 22.5 70 ST450RAB394JLZ 390 0.79 5 14 0.25 3.5 24.5 65 ST450RAB474JLZ 470 0.79 5 15 0.25 3.0 26.5 65 ST450RAB564JLZ 560 0.79 5 13 0.25 2.0 28.5 65 ST450RAB684JLZ 680 0.79 5 13 0.25 1.9 38.5 60 ST450RAB824JLZ 820 0.79 5 13 0.25 1.6 41.0 50 ST450RAB105JLZ 1000 0.79 5 15 0.25 1.5 44.0 50 1. When ordering, please specify termination and testing codes: ST450RAB105JLZ Termination: L = RoHS compliant silver-palladium-platinum glass frit. Special order: R = Tin over nickel over silver-platinum-glass frit. S = Tin-lead (63/37) over silver-platinum-glass frit. T = Tin-silver-copper (95.5/4/0.5) over silver-platinum- glass frit. P = Tin-lead (63/37) over tin over nickel over silver-plati- num-glass frit. Q = Tin-silver-copper (95.5/4/0.5) over tin over nickel over silver-platinum-glass frit. Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 2. Inductance at 2.5 MHz measured using an Agilent/HP 4286A or equivalent and a Coilcraft SMD-A fixture with Coilcraft-provided cor- relation pieces. Inductance at 0.79 MHz measured using an Agilent/HP 4192A or equivalent and Coilcraft SMD-B test fixture. 3. Q read at test frequency directly on an Agilent/HP 4395A impedance analyzer and an Agilent/HP 16193A test fixture or equivalents. 4. SRF measured using an Agilent/HP 8753D network analyzer or equivalent and a Coilcraft SMD-D test fixture. 5. DCR measured on a Cambridge Technology micro-ohmmeter or equivalent. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Core material Ferrite Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Ambient temperature –40°C to +85°C with Imax current, +85°C to +100°C with derated current Storage temperature Component: –55°C to +100°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +200 to +700 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Packaging 600 per 7″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 3.7 mm pocket depth Chip Inductors for Critical Applications ST450RAB With inductance values up to 1000 µH, these are our highest inductance chip inductors. Their ferrite core allows higher current ratings and lower DC resistance. Document ST106-1 Revised 10/14/11

ST450RAB Series (1812) © Coilcraft, Inc. 2012 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. Document ST106-2 Revised 10/14/11 A B C D max max max ref E F G H I J 4,95 3,81 3,43 1,78 2,54 0,64 3,25 3,05 1,14 3,00 mm I I J H A B overall F G E terminal F C D Terminal wraparound: approx 0.015/0,38 both ends Recommended Land Pattern Pick and place material Typical Q vs Frequency Typical L vs Frequency Current Derating Suggested Land Pattern -40 -20 02 04 06 08 0 100 120 Ambient temperature (°C) 120 110 100 Pe rcent of rated rmsI 25°C Note: Dimensions are before optional solder application. For maximum overall dimensions including solder, add 0.0025 in / 0,064 mm to B and 0.006 in / 0,15 mm to A and C. 12 µH 22 µH47 µH 100 µH 220 µH470 µH 1000 µH Q F actor 0.1 1 10010 Frequency (MHz) 12 µH 22 µH 47 µH 100 µH 220 µH 470 µH 1000 µH 100 1000 10000 0.1 1 10010 Inductance (µH) Frequency (MHz)