DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

© Coilcraft, Inc. 2012

1102 Silver Lake Road

Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. Inductance3 Percent SRF min5 DCR max6 Imax Part number1 (nH) tolerance Q min4 (GHz) (OhST) (A) ST413RAD3N0_LZ2 3.0 @ 50 MHz 5 57 @ 1000 MHz >5.00 38 1.8 ST413RAD4N1_LZ 4.1 @ 50 MHz 5 75 @ 1000 MHz >5.00 50 1.8 ST413RAD7N8_LZ2 7.8 @ 50 MHz 5 51 @ 500 MHz 3.80 50 1.6 ST413RAD10N_LZ 10 @ 50 MHz 5,2 60 @ 500 MHz 3.20 60 1.5 ST413RAD12N_LZ 12 @ 50 MHz 5,2 57 @ 500 MHz 2.40 60 1.5 ST413RAD18N_LZ 18 @ 50 MHz 5,2 62 @ 350 MHz 2.10 70 1.4 ST413RAD22N_LZ 22 @ 50 MHz 5,2 62 @ 350 MHz 2.05 70 1.4 ST413RAD33N_LZ 33 @ 50 MHz 5,2 49 @ 150 MHz 1.70 90 1.2 ST413RAD36N_LZ 36 @ 50 MHz 5,2 57 @ 150 MHz 1.40 90 1.1 ST413RAD39N_LZ 39 @ 50 MHz 5,2 45 @ 150 MHz 1.30 90 1.1 ST413RAD47N_LZ 47 @ 50 MHz 5,2,1 45 @ 150 MHz 1.45 120 0.95 ST413RAD56N_LZ 56 @ 50 MHz 5,2,1 43 @ 150 MHz 1.08 120 0.95 ST413RAD68N_LZ 68 @ 50 MHz 5,2,1 54 @ 150 MHz 1.15 130 0.85 ST413RAD82N_LZ 82 @ 50 MHz 5,2,1 54 @ 150 MHz 1.06 160 0.80 ST413RADR10_LZ 100 @ 50 MHz 5,2,1 51 @ 150 MHz 0.82 160 0.80 1. When ordering, specify tolerance, termination and testing codes: ST413RADR10GLZ Tolerance: F 1% G = 2% J = 5% Termination: L = RoHS compliant silver-palladium-platinum glass frit. Special order: S = Tin-lead (63/37) over silver-platinum-glass frit. T = Tin-silver-copper (95.5/4/0.5) over silver-platinum- glass frit. Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 2. Part is wound on low profile coilform. 3. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286A impedance analyzer or equivalent with Coilcraft-provided correlation pieces. 4. Q measured using an Agilent/HP 4291A with an AgilentHP 16197A test fixture or equivalents. 5. SRF measured using an Aglilent/HP 8753ES network analyzeror equivalent and a Coilcraft SMD-D test fixture. 6. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a Coilcraft CCF858 test fixture. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Core material Ceramic Terminations Silver-palladium-platinum-glass frit. Ambient temperature –40°C to +125°C with Imax current, +125°C to +140°C with derated current Storage temperature Component: –55°C to +140°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Packaging 2000/7″reel Standard height parts: Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.8 mm pocket depth Low profile parts: Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth Chip Inductors for Critical Applications ST413RAD

1008 CHIP INDUCTORS

■ Highest Q factors for this body size, roughly 20% higher than our xx413RAA parts. ■ Exceptional SRFs, tight tolerance and batch consistency Document ST190-1 Revised 11/06/12

ST413RAD Series (1008) © Coilcraft, Inc. 2012 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. Document ST190-2 Revised 11/06/12 A B C D max max max* ref E F G H I J 2,92 2,79 2,03 0,51 2,03 0,51 1,52 2,54 1,02 1,27 mm *Low profile parts: 0.050/1,27 100 110 120 10 100 1000 10000 Frequency (MHz) Q F actor 22 nH 10 nH 47 nH 3.0 nH 100 nH 68 nH 100 110 120 Frequency (MHz) Inductance (nH) 11 0 100 1000 10000 3.0 nH 10 nH 22 nH 47 nH 68 nH 100 nH Typical L vs FrequencyTypical Q vs Frequency Current Derating -40-55 -20 02 04 06 08 0 100 160140120 Ambient temperature (°C) Pe rcent of rated rmsI 120 110 100 25°C I I J H A B overall F G E terminal F C D Terminal wraparound: approx 0.015/0,38 both ends Recommended Land Pattern Pick and place material Suggested Land Pattern Note: Dimensions are before optional solder application. For maximum overall dimensions including solder, add 0.0025 in / 0,064 mm to B and 0.006 in / 0,15 mm to A and C.