DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

© Coilcraft, Inc. 2012

1102 Silver Lake Road

Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information.

1008 CHIP INDUCTORS

Document ST103-1 Revised 12/05/12 Inductance2 Percent SRF min4 DCR max5 Imax Part number1 (µH) tolerance Q min3 (MHz) (Ohms) (mA) ST413RAB102XJLZ 1.0 @ 7.9 MHz 5 16 @ 2.5 MHz 230 0.62 370 ST413RAB122XJLZ 1.2 @ 7.9 MHz 5 18 @ 2.5 MHz 210 0.68 370 ST413RAB152XJLZ 1.5 @ 7.9 MHz 5 20 @ 2.5 MHz 190 0.76 370 ST413RAB182XJLZ 1.8 @ 7.9 MHz 5 20 @ 2.5 MHz 170 0.84 370 ST413RAB222XJLZ 2.2 @ 7.9 MHz 5 28 @ 2.5 MHz 150 1.10 310 ST413RAB272XJLZ 2.7 @ 7.9 MHz 5 20 @ 2.5 MHz 135 1.28 270 ST413RAB332XJLZ 3.3 @ 7.9 MHz 5 20 @ 2.5 MHz 120 1.46 260 ST413RAB392XJLZ 3.9 @ 7.9 MHz 5 22 @ 2.5 MHz 105 1.56 250 ST413RAB432XJLZ 4.3 @ 7.9 MHz 5 24 @ 2.5 MHz 85 1.70 230 ST413RAB472XJLZ 4.7 @ 7.9 MHz 5 24 @ 2.5 MHz 90 1.68 230 ST413RAB502XJLZ 5.0 @ 7.9 MHz 5 23 @ 2.5 MHz 30 2.20 200 ST413RAB562XJLZ 5.6 @ 7.9 MHz 5 23 @ 2.5 MHz 80 1.82 220 ST413RAB622XJLZ 6.2 @ 7.9 MHz 5 24 @ 2.5 MHz 75 2.50 195 ST413RAB682XJLZ 6.8 @ 7.9 MHz 5 24 @ 2.5 MHz 70 2.00 210 ST413RAB822XJLZ 8.2 @ 7.9 MHz 5 23 @ 2.5 MHz 65 2.65 190 ST413RAB912XJLZ 9.1 @ 7.9 MHz 5 25 @ 2.5 MHz 57 2.90 170 ST413RAB103XJLZ 10 @ 7.9 MHz 5 24 @ 2.5 MHz 60 2.95 165 ST413RAB123XJLZ 12 @ 2.5 MHz 5 28 @ 2.5 MHz 38 3.30 160 ST413RAB153XJLZ 15 @ 2.5 MHz 5 28 @ 2.5 MHz 30 3.70 150 ST413RAB183XJLZ 18 @ 2.5 MHz 5 28 @ 2.5 MHz 26 4.00 140 ST413RAB223XJLZ 22 @ 2.5 MHz 5 28 @ 2.5 MHz 22 6.14 115 ST413RAB273XJLZ 27 @ 2.5 MHz 5 28 @ 2.5 MHz 12 6.45 110 ST413RAB333XJLZ 33 @ 2.5 MHz 5 30 @ 2.5 MHz 19 7.00 110 ST413RAB393XJLZ 39 @ 2.5 MHz 5 29 @ 2.5 MHz 26 10.0 90 ST413RAB473XJLZ 47 @ 2.5 MHz 5 30 @ 2.5 MHz 12 10.7 80 ST413RAB563XJLZ 56 @ 2.5 MHz 5 20 @ 0.79 MHz 8.0 10.0 95 ST413RAB683XJLZ 68 @ 0.79 MHz 5 17 @ 0.79 MHz 5.7 13.5 85 ST413RAB104XJLZ 100 @ 0.79 MHz 5 18 @ 0.79 MHz 4.5 20.5 65 1. When ordering, please specify termination and testing codes: ST413RAB104JLZ Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = Tin-silver-copper (95.5/4/0.5) over silver-palladium- platinum-glass frit or S = Tin-lead (63/37) over silver-palladium-platinum- glass frit. Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286A impedance analyzer or equivalent with Coilcraft-provided correlation pieces. 3. Q measured using an Agilent/HP 4291A with an Agilent/HP 16197 test fixture or equivalents. 4. SRF measured using an Agilent/HP 8753ES network analyzer or equivalent with a Coilcraft SMD-D fixture. 5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a Coilcraft CCF858 test fixture. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

  • Lower DCR than other 1008 inductors
  • Ferrite construction for high current handling
  • Inductance values: 1.0 – 100 µH Core material Ceramic/Ferrite Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 38.3 – 41.0 mg Ambient temperature –40°C to +85°C with Imax current, +85°C to +100°C with derated current Storage temperature Component: –55°C to +100°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 2000/7″ reel; 7500/13″ reel. Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 2.0 mm pocket depth Chip Inductors for Critical Applications ST413RAB

ST413RAB Series (1008) © Coilcraft, Inc. 2012 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. Typical Q vs Frequency Typical L vs Frequency A B C D max max max ref E F G H I J 2,92 2,79 2,03 0,51 2,03 0,51 1,52 2,54 1,02 1,27 mm Current Derating 100 1000 11 0 1000100 Inductance (µH) Frequency (MHz) 1.8 µH 6.8 µH 33 µH 10 µH 68 µH 11 0 100 Frequency (MHz) Q F actor 1.8 µH 6.8 µH 33 µH 10 µH 68 µH I I J H A B overall F G E terminal F C D Terminal wraparound: approx 0.010/0,25 both ends Recommended Land Pattern Pick and place material Suggested Land Pattern -40 -20 02 04 06 08 0 100 120 Ambient temperature (°C) 120 110 100 Pe rcent of rated rmsI 25°C Note: Dimensions are before optional solder application. For maximum overall dimensions including solder, add 0.0025 in / 0,064 mm to B and 0.006 in / 0,15 mm to A and C. Document ST103-2 Revised 12/05/12