ST380C

ST380C IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

DISCRETE POWER DIODES and THYRISTORS DATA BOOK

PHASE CONTROL THYRISTORS Hockey Puk Version ST380C..C SERIES D-367 Bulletin I25168/B IT(AV) 960 A @ T hs 55 °C IT(RMS) 1900 A @ T hs 25 °C ITSM @ 50Hz 15000 A @ 60Hz 15700 A I2t @ 50Hz 1130 KA 2s @ 60Hz 1030 KA 2s V DRM /VRRM 400 to 600 V tq typical 100 µs TJ - 40 to 125 °C Parameters ST380C..C Units Major Ratings and Characteristics Typical Applications DC motor controls Controlled DC power supplies AC controllers

Features

Metal case with ceramic insulator International standard case TO-200AB (E-PUK) Low profile hockey-puk to increase current-carrying capability case style TO-200AB (E-PUK)

ST380C..C Series 2222222222222 D-368 ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage V DRM /VRRM , max. repetitive VRSM , maximum non- IDRM /IRRM max. Type number Code peak and off-state voltage repetitive peak voltage @ T J = TJ max V V mA 04 400 500 06 600 700 IT(AV) Max. average on-state current 960 (440) A 180° conduction, half sine wave @ Heatsink temperature 55 (75) °C double side (single side) cooled IT(RMS) Max. RMS on-state current 1900 DC @ 25°C heatsink temperature double side cooled ITSM Max. peak, one-cycle 15000 t = 10ms No voltage non-repetitive surge current 15700 A t = 8.3ms reapplied 12600 t = 10ms 100% V RRM 13200 t = 8.3ms reapplied Sinusoidal half wave, I2t Maximum I2t for fusing 1130 t = 10ms No voltage Initial TJ = TJ max. 1030 t = 8.3ms reapplied 800 t = 10ms 100% V RRM 725 t = 8.3ms reapplied I2√t Maximum I2√t for fusing 11300 KA 2√s t = 0.1 to 10ms, no voltage reapplied V T(TO) 1 Low level value of threshold voltage V T(TO)2 High level value of threshold voltage rt1 Low level value of on-state slope resistance rt2 High level value of on-state slope resistance V TM Max. on-state voltage 1.60 V Ipk= 3000A, TJ = TJ max, tp = 10ms sine pulse IH Maximum holding current 600 IL Typical latching current 1000 0.85 (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. 0.25 (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. 0.24 (I > π x IT(AV)),TJ = TJ max. Parameter ST380C..C Units Conditions 0.88 (I > π x IT(AV)),TJ = TJ max. On-state Conduction KA 2s V m Ω mA TJ = 25°C, anode supply 12V resistive load di/dt Max. non-repetitive rate of rise Gate drive 20V, 20Ω , tr ≤ 1µs of turned-on current TJ = TJ max, anode voltage ≤ 80% VDRM Gate current 1A, dig/dt = 1A/µs Vd = 0.67% VDRM , TJ = 25°C ITM = 550A, TJ = TJ max, di/dt = 40A/µs , VR = 50V dv/dt = 20V/µs , Gate 0V 100Ω, tp = 500µs Parameter ST380C..C Units Conditions Switching

1000 A/µs

td Typical delay time 1.0 tq Typical turn-off time 100 µs ST380C..C 50

ST380C..C Series D-372 Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Fig. 5- On-state Power Loss Characteristics Fig. 6- On-state Power Loss Characteristics Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled

ST380C..C Series D-373 Fig. 9 - On-state Voltage Drop Characteristics Fig. 10 - Thermal Impedance ZthJ-hs Characteristics Fig. 11 - Gate Characteristics

ST380C..C Series D-3693333 dv/dt Maximum critical rate of rise of off-state voltage IRRM Max. peak reverse and off-state IDRM leakage current Blocking 500 V/µ s TJ = TJ max. linear to 80% rated VDRM Parameter ST380C..C Units Conditions 50 mA TJ = TJ max, rated V DRM /VRRM applied PGM Maximum peak gate power 10.0 TJ = TJ max, tp ≤ 5ms PG(AV) Maximum average gate power 2.0 TJ = TJ max, f = 50Hz, d% = 50 IGM Max. peak positive gate current 3.0 A TJ = TJ max, tp ≤ 5ms +VGM Maximum peak positive gate voltage -VGM Maximum peak negative gate voltage TJ = - 40°C mA TJ = 25°C TJ = 125°C TJ = - 40°C V TJ = 25°C TJ = 125°C IGD DC gate current not to trigger 10 mA Parameter ST380C..C Units Conditions 5.0 Triggering TYP. MAX. 200 - 100 200 50 - 2.5 - 1.8 3.0 1.1 - VGD DC gate voltage not to trigger 0.25 V Max. gate current/voltage not to trigger is the max. value which will not trigger any unit with rated VDRM anode-to-cathode applied TJ = TJ max Max. required gate trigger/ cur- rent/ voltage are the lowest value which will trigger all units 12V anode-to-cathode appliedVGT DC gate voltage required to trigger IGT DC gate current required to trigger W V TJ = TJ max, tp ≤ 5ms TJ Max. operating temperature range-40 to 125 Tstg Max. storage temperature range -40 to 150 R thJ-hsMax. thermal resistance, 0.09 DC operation single side cooled junction to heatsink 0.04 DC operation double side cooled R thC-hsMax. thermal resistance, 0.02 DC operation single side cooled case to heatsink 0.01 DC operation double side cooled F Mounting force, ± 10% 9800 N (1000) (Kg) wt Approximate weight 83 g Parameter ST380C..C Units Conditions K/W Thermal and Mechanical Specification Case style TO - 200AB (E-PUK) See Outline Table K/W

ST380C..C Series 2222222222222 D-370 1 - Thyristor 2 - Essential part number 3 - 0 = Converter grade 4 - C = Ceramic Puk 5 - Voltage code: Code x 100 = VRRM (See Voltage Rating Table) 6 - C = Puk Case TO-200AB (E-PUK) 7 - 0 = Eyelet terminals (Gate and Auxiliary Cathode Unsoldered Leads) 1 = Fast-on terminals (Gate and Auxiliary Cathode Unsoldered Leads) 2 = Eyelet terminals (Gate and Auxiliary Cathode Soldered Leads) 3 = Fast-on terminals (Gate and Auxiliary Cathode Soldered Leads) 8 - Critical dv/dt:None = 500V/µsec (Standard selection) L = 1000V/µsec (Special selection) Ordering Information Table ΔR thJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) Device Code 51 2 3 4 ST 38 0 C 06 C 1 76 8 Single SideDouble Side Single SideDouble Side 120° 0.012 0.012 0.012 0.013 90° 0.015 0.015 0.016 0.017 K/W 60° 0.022 0.022 0.023 0.023 30° 0.036 0.036 0.036 0.037 Sinusoidal conductionRectangular conduction Conduction angle Units Conditions

ST380C..C Series D-3713333 Outline Table Fig. 2 - Current Ratings CharacteristicsFig. 1 - Current Ratings Characteristics Case Style TO-200AB (E-PUK) All dimensions in millimeters (inches) DIA. MAX. 4.75 (0.19) 28 (1.10) 6.5 (0.26) 0.3 (0.01) MIN. 0.3 (0.01) MIN. ANODE TO GATE CREEPAGE DISTANCE: 11.18 (0.44) MIN. STRIKE DISTANCE: 7.62 (0.30) MIN. 25.3 (0.99) 14.1 / 15.1 (0.56 / 0.59) 25°± 5° GATE TERM. FOR 1.47 (0.06) DIA. PIN RECEPTACLE 25.3 (0.99) 40.5 (1.59) DIA. MAX. DIA. MAX. 2 HOLES 3.56 (0.14) x 1.83 (0.07) MIN. DEEP 42 (1.65) MAX.