ST333C

ST333C IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

DISCRETE POWER DIODES and THYRISTORS DATA BOOK

INVERTER GRADE THYRISTORS Hockey Puk Version ST333C..L SERIES Bulletin I25187/A Typical Applications Inverters Choppers Induction heating All types of force-commutated converters

Features

Metal case with ceramic insulator International standard case TO-200AC (B-PUK) All diffused design Center amplifying gate Guaranteed high dV/dt Guaranteed high dI/dt High surge current capability Low thermal impedance High speed performance case style TO-200AC (B-PUK) IT(AV) 620 A @ T hs 55 °C IT(RMS) 1230 A @ T hs 25 °C ITSM @ 50Hz 11000 A @ 60Hz 11500 A I2t @ 50Hz 605 KA 2s @ 60Hz 553 KA 2s V DRM /VRRM 400 to 800 V tq range 10 to 30 µs TJ - 40 to 125 °C Parameters ST333C..L Units Major Ratings and Characteristics

ST333C..L Series ST333C..L 50 Voltage V DRM /VRRM , maximum VRSM , maximum IDRM /IRRM max. Type number Code repetitive peak voltage non-repetitive peak voltage@ T J = TJ max. V V mA 04 400 500 08 800 900 ELECTRICAL SPECIFICATIONS Voltage Ratings Current Carrying Capability IT(AV) Max. average on-state current 620 (305) A 180° conduction, half sine wave @ Heatsink temperature 55 (75) °C double side (single side) cooled IT(RMS) Max. RMS on-state current 1230 DC @ 25°C heatsink temperature double side cooled ITSM Max. peak, one half cycle, 11000 t = 10ms No voltage non-repetitive surge current 11500 A t = 8.3ms reapplied 9250 t = 10ms 100% V RRM 9700 t = 8.3ms reapplied Sinusoidal half wave, I2t Maximum I2t for fusing 605 t = 10ms No voltage Initial TJ = TJ max 553 t = 8.3ms reapplied 428 t = 10ms 100% V RRM 391 t = 8.3ms reapplied I2√ t Maximum I2√t for fusing 6050 KA 2√s t = 0.1 to 10ms, no voltage reapplied Parameter ST333C..L Units Conditions On-state Conduction KA 2s Frequency Units 50Hz 1430 1250 2340 1940 6310 5620 400Hz 1670 1170 2310 2010 3440 5030 1000Hz 1080 880 2090 1800 2040 1750 2500Hz 530 400 1190 990 990 800 Recovery voltage Vr 50 50 50 50 50 50 Voltage before turn-on Vd VDRM VDRM VDRM Rise of on-state current di/dt 50 50 - - - - A/µ s Heatsink temperature 40 55 40 55 40 55 °C Equivalent values for RC circuit10Ω / 0.47µF 10Ω / 0.47µF 10Ω / 0.47µF ITM 180oel180oel 100µs ITM ITM V A

ST333C..L Series Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Fig. 5 - On-state Power Loss Characteristics Fig. 6 - On-state Power Loss Characteristics Fig. 7 - Maximum Non-repetitive Surge Current Fig. 8 - Maximum Non-repetitive Surge Current

ST333C..L Series Fig13-FrequencyCharacteristics Fig. 9 - On-state Voltage Drop Characteristics Fig. 10 - Thermal Impedance ZthJ-hs Characteristics Fig. 12 - Reverse Recovery Current CharacteristicsFig. 11 - Reverse Recovered Charge Characteristics

ST333C..L Series Fig. 15 - Frequency Characteristics Fig. 14 - Frequency Characteristics Fig. 16 - Maximum On-state Energy Power Loss Characteristics

ST333C..L Series Fig. 17 - Gate Characteristics 0.1 100 0.001 0.01 0.1 1 10 100 V G D IG D (b ) (a ) Tj=25 °C Tj=125 °C Tj=-40 °C (1) (2) In sta n ta n e o u s G a te C u rre n t (A ) Insta nta ne o u s G a te V o lt a g e (V) Re c ta n g u la r g a te p u lse a ) Re c o m m e n d e d lo a d lin e fo r b ) Re c o m m e n d e d lo a d lin e fo r <= 3 0% ra te d d i/ d t : 10V , 10 o h m s ra t e d d i/ d t : 20 V , 10 o h m s; tr< = 1 µs t r< = 1 µ s (1) PG M = 1 0W , tp = 20m s (2) PG M = 2 0W , tp = 10m s (3) PG M = 4 0W , tp = 5m s (4) PG M = 6 0W , tp = 3.3 m s (3 ) D e v ic e : ST33 3C ..L Se rie s Fre q u e n c y Lim ite d b y PG (A V ) (4 )

ST333C..L Series V TM Max. peak on-state voltage 1.96 ITM = 1810A, TJ = TJ max, tp = 10ms sine wave pulse V T(TO)1 Low level value of threshold voltage V T(TO)2 High level value of threshold voltage rt1 Low level value of forward slope resistance rt2 High level value of forward slope resistance IH Maximum holding current 600 TJ = 25°C, IT > 30A IL Typical latching current 1000 TJ = 25°C, VA = 12V, Ra = 6Ω, IG = 1A Parameter ST333C..L Units Conditions On-state Conduction 0.91 (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. 0.93 (I > π x IT(AV)), TJ = TJ max. V 0.58 (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. 0.58 (I > π x IT(AV)), TJ = TJ max. m Ω mA di/dt Max. non-repetitive rate of rise TJ = TJ max, VDRM = rated VDRM of turned-on current ITM = 2 x di/dt TJ= 25°C, VDM = rated VDRM , ITM = 50A DC, tp= 1µs Resistive load, Gate pulse: 10V, 5Ω source TJ = TJ max, ITM = 550A, commutating di/dt = 40A/µs VR = 50V, tp = 500µs, dv/dt: see table in device code Switching Parameter ST333C..L Units Conditions

1000 A/µs

td Typical delay time 1.1 Min Max dv/dt Maximum critical rate of rise of TJ = TJ max. linear to 80% VDRM , higher value off-state voltage available on request IRRM Max. peak reverse and off-state IDRM leakage current Parameter ST333C..L Units Conditions Blocking

500 V/µ s

50 mA TJ = TJ max, rated VDRM /VRRM applied PGM Maximum peak gate power 60 PG(AV) Maximum average gate power 10 IGM Max. peak positive gate current 10 A TJ = TJ max, tp ≤ 5ms +V GM Maximum peak positive gate voltage -VGM Maximum peak negative gate voltage IGT Max. DC gate current required to trigger VGT Max. DC gate voltage required to trigger IGD Max. DC gate current not to trigger 20 mA VGD Max. DC gate voltage not to trigger 0.25 V Triggering Parameter ST333C..L Units Conditions W TJ = TJ max., f = 50Hz, d% = 50 V TJ = TJ max, tp ≤ 5ms 200 mA 3 V TJ = 25°C, VA = 12V, Ra = 6Ω TJ = TJ max, rated VDRM applied 10 30 µs tq Max. turn-off time

ST333C..L Series TJ Max. operating temperature range-40 to 125 Tstg Max. storage temperature range -40 to 150 R thJ-hsMax. thermal resistance, 0.11 DC operation single side cooled junction to heatsink 0.05 DC operation double side cooled R thC-hsMax. thermal resistance, 0.011 DC operation single side cooled case to heatsink 0.005 DC operation double side cooled F Mounting force, ± 10% 9800 N (1000) (Kg) wt Approximate weight 250 g Parameter ST333C..L Units Conditions K/W Thermal and Mechanical Specification K/W Case style TO - 200AC (B-PUK) See Outline Table ΔR thJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) Single SideDouble Side Single SideDouble Side 180° 0.012 0.010 0.008 0.008 120° 0.014 0.015 0.014 0.014 60° 0.026 0.027 0.027 0.028 30° 0.045 0.046 0.046 0.046 Sinusoidal conductionRectangular conduction Conduction angle Units Conditions Ordering Information Table 5 6 8 9 ST 33 3 C 08 L H K 1 3 4 107 Device Code 1 2 dv/dt - tq combinations available dv/dt (V/µs)20 50 100 200 400

10 CN DN EN -- --

12 CM DM EM FM * --

15 CL DL EL FL * HL

18 CP DP EP FP HP

20 CK DK EK FK HK

tq(µs) 1 - Thyristor 2 - Essential part number 3 - 3 = Fast turn off 4 - C = Ceramic Puk 5 - Voltage code: Code x 100 = VRRM (See Voltage Rating Table) 6 - L = Puk Case TO-200AC (B-PUK) 7 - Reapplied dv/dt code (for tq test condition) 8 - tq code 9 - 0 = Eyelet term. (Gate and Aux. Cathode Unsoldered Leads) 1 = Fast-on term. (Gate and Aux. Cathode Unsoldered Leads) 2 = Eyelet term. (Gate and Aux. Cathode Soldered Leads) 3 = Fast-on term. (Gate and Aux. Cathode Soldered Leads) - Critical dv/dt: None = 500V/µsec (Standard value) L = 1000V/µsec (Special selection) 10 *Standard part number. All other types available only on request.

ST333C..L Series Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics Outline Table TWO PLACES PIN RECEPTACLE AMP. 60598-1 53 (2.09) DIA. MAX. 5 8.5 (2 .3 ) D IA . M A X . 2 HOLES DIA. 3.5 (0.14) x 2.5 (0.1) DEEP 4.7 (0.18) 27 (1.06 ) M A X . 0.7 (0.03) MIN. 6.2 (0.24) MIN. 20°± 5° 36.5 (1.44) CREPAGE DISTANCE 36.33 (1.430) MIN. STRIKE DISTANCE 17.43 (0.686) MIN. Case Style TO-200AC (B-PUK) All dimensions in millimeters (inches)