ST330S

ST330S IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Features

Hermetic metal case with ceramic insulator International standard case TO-209AE (TO-118) Threaded studs UNF 3/4 - 16UNF2A or ISO M24x1.5 Compression Bonded Encapsulation for heavy duty operations such as severe thermal cycling Typical Applications DC motor controls Controlled DC power supplies AC controllers IT(AV) 330 A @ T C 75 °C IT(RMS) 520 A ITSM @ 50Hz 9000 A @ 60Hz 9420 A I2t @ 50Hz 405 KA 2s @ 60Hz 370 KA 2s V DRM /VRRM 400 to 1600 V tq typical 100 µs TJ - 40 to 125 °C Parameters ST330S Units Major Ratings and Characteristics case style TO-209AE (TO-118)

Voltage V DRM /VRRM , max. repetitive VRSM , maximum non- IDRM /IRRM max. Type number Code peak and off-state voltage repetitive peak voltage @ T J = TJ max V V mA 04 400 500 08 800 900 ST330S 12 1200 1300 50 14 1400 1500 16 1600 1700 IT(AV) Max. average on-state current 330 A 180° conduction, half sine wave @ Case temperature 75 °C IT(RMS) Max. RMS on-state current 520 A DC @ 62°C case temperature ITSM Max. peak, one-cycle 9000 t = 10ms No voltage non-repetitive surge current 9420 t = 8.3ms reapplied 7570 t = 10ms 100% V RRM 7920 t = 8.3ms reapplied Sinusoidal half wave, I2t Maximum I2t for fusing 405 t = 10ms No voltage Initial TJ = TJ max. 370 t = 8.3ms reapplied 287 t = 10ms 100% V RRM 262 t = 8.3ms reapplied I2√ t Maximum I2√t for fusing 4050 KA 2√s t = 0.1 to 10ms, no voltage reapplied V T(TO)1 Low level value of threshold voltage V T(TO)2 High level value of threshold voltage rt1 Low level value of on-state slope resistance rt2 High level value of on-state slope resistance V TM Max. on-state voltage 1.51 V Ipk= 1040A, TJ = TJ max, tp = 10ms sine pulse IH Maximum holding current 600 IL Typical latching current 1000 0.91 (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. 0.58 (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. 0.57 (I > π x IT(AV)),TJ = TJ max. Parameter ST330S Units Conditions 0.92 (I > π x IT(AV)),TJ = TJ max. On-state Conduction KA 2s V m Ω mA TJ = 25°C, anode supply 12V resistive load A

Fig. 3 - On-state Power Loss Characteristics Fig. 4 - On-state Power Loss Characteristics Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics

Fig. 7 - On-state Voltage Drop Characteristics Fig. 8 - Thermal Impedance ZthJC Characteristic Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current

Fig. 9 - Gate Characteristics

Parameter ST330S Units Conditions Switching tq Typical turn-off time 100 td Typical delay time 1.0 di/dt Max. non-repetitive rate of rise Gate drive 20V, 20Ω , tr ≤ 1µs of turned-on current TJ = TJ max, anode voltage ≤ 80% VDRM Gate current A, dig/dt = 1A/µs Vd = 0.67% VDRM , TJ = 25°C ITM = 550A, TJ = TJ max, di/dt = 40A/µs , VR = 50V dv/dt = 20V/µs , Gate 0V 100Ω, tp = 500µs

1000 A/µs

µs dv/dt Maximum critical rate of rise of off-state voltage IRRM Max. peak reverse and off-state IDRM leakage current Blocking 500 V/µs TJ = TJ max. linear to 80% rated VDRM Parameter ST330S Units Conditions 50 mA TJ = TJ max, rated V DRM /VRRM applied PGM Maximum peak gate power 10.0 TJ = TJ max, tp ≤ 5ms PG(AV) Maximum average gate power 2.0 TJ = TJ max, f = 50Hz, d% = 50 IGM Max. peak positive gate current 3.0 A TJ = TJ max, tp ≤ 5ms +VGM Maximum peak positive gate voltage -VGM Maximum peak negative gate voltage IGT DC gate current required TJ = - 40°C to trigger mA TJ = 25°C TJ = 125°C VG T DC gate voltage required TJ = - 40°C to trigger V TJ = 25°C TJ = 125°C IGD DC gate current not to trigger 10 mA Parameter ST330S Units Conditions 5.0 Triggering VGD DC gate voltage not to trigger 0.25 V TJ = TJ max TYP. MAX. 200 - 100 200 50 - 2.5 - 1.8 3.0 1.1 - Max. gate current/ voltage not to trigger is the max. value which will not trigger any unit with rated V DRM anode-to-cathode applied Max. required gate trigger/ cur- rent/ voltage are the lowest value which will trigger all units 12V anode-to-cathode applied W V TJ = TJ max, tp ≤ 5ms

Ordering Information Table 1 - Thyristor 2 - Essential part number 3 - 0 = Converter grade 4 - S = Compression bonding Stud 5 - Voltage code: Code x 100 = VRRM (See Voltage Rating Table) 6 - P = Stud base 16UNF threads M = Stud base metric threads (M24 x 1.5) 7 - 0 = Eyelet terminals (Gate and Auxiliary Cathode Leads) 1 = Fast - on terminals (Gate and Auxiliary Cathode Leads) 3 = Threaded top terminal 3/8" 24UNF-2A 8 - Critical dv/dt:None = 500V/µsec (Standard selection) L = 1000V/µsec (Special selection) Device Code 51 2 3 4 ST 33 0 S 16 P 0 76 8 TJ Max. operating temperature range-40 to 125 Tstg Max. storage temperature range -40 to 150 R thJC Max. thermal resistance, junction to case R thCS Ma x. thermal resistance, case to heatsink T Mounting torque, ± 10% 48.5 (425) wt Approximate weight 535 g Case style TO - 209AE (TO-118) See Outline Table Parameter ST330S Units Conditions

0.10 DC operation

0.03 Mounting surface, smooth, flat and greased

Thermal and Mechanical Specification K/W Non lubricated threadsNm (lbf-in) ΔR thJC Conduction (The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC) 180° 0.011 0.008 TJ = TJ max. 120° 0.013 0.014 90° 0.017 0.018 K/W 60° 0.025 0.026 30° 0.041 0.041 Conduction angleSinusoidal conductionRectangular conductionUnits Conditions

Case Style TO-209AE (TO-118) All dimensions in millimeters (inches) Outline Table Case Style TO-209AE (TO-118) with top thread terminal 3/8" All dimensions in millimeters (inches) RED CATHODE RED SILICON RUBBER 10.5 (0.41) 24 5 (9 .6 5) ± 1 0 (0 .3 9) WHITE GATE 4.3 (0.17) DIA. CERAMIC HOUSING WHITE SHRINK NOM. 47 (1.85) M A X . 2 4 5 (9 .6 5) 38 (1.50) MAX. DIA. * FOR METRIC DEVICE: M24 X 1.5 - LENGHT SCREW 21 (0.83) MAX. 22 (0.87) MAX. M A X . 21 (0.82) M A X . SW 45 FLEXIBLE LEAD 4.5 (0.18) MAX. C.S. 50mm (0.078 s.i.) 25 5 (1 0.04 ) RED SHRINK 22 (0.86) MIN. 49 (1.92) MAX. 3/4"16 UNF-2A 2 7 .5 (1.08) 9.5 (0.37) MIN. 47 (1 .85) DIA. MAX. M A X . M A X . M A X . CERAMIC HOUSING SW 45 * FOR METRIC DEVICE: M24 x 1.5 - LENGHT SCREW 21 (0.83) MAX. 21 (0.8 3) 3/4"-16UNF-2A * 25 (0.9 8) 3/8"-24UNF-2A 17 (0.67) DIA. AMP. 280000-1 REF-250