ST3237ECPR

ST3237E STMICROELECTRONICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 15

Technical content

I EDS PROTECTION FOR RS-232 I/O PINS: ±15KV HUMAN BODY MODEL ±8KV IEC 1000-4-2 CONTACT DISCHARGE I 1µA LOW POWER SHUTDOWN WITH RECEIVERS ACTIVE I GUARENTEED DATA RATE 250Kbps (Normal Operation) 1Mbps (Very High Speed Operation) I GUARANTEED SLEW RATE RANGE 6V/µs (Normal Operation) 24V/µs (Very High Speed Operation) I 0.1µF EXTERNAL CAPACITORS I FLOW-THROUGH PINOUT I AVAILABLE IN SO-28 AND SSOP-28 I LOW SUPPLY CURRENT 300 µA

DESCRIPTION

The ST3237E is a 3V to 5.5V powered EIA/ TIA-232 and V.28/V.24 communication interfaces high data-rate capability and enhanced electrostatic discharge (ESD) protection at ±8KV using IEC1000-4-2 contact discharge and ±15kV using Human Body Model (HBM). The other pins are protected with standard ESD protection at ±2kV using HBM method. The ST3237C is a transceiver (5 drivers, 3 receivers) for fast modem applications. The device has a proprietary low-dropout transmitter output stage providing true RS-232 performance from a 3V to 5.5V supply using a dual charge pump. The device is guaranteed to run at data rates of 250Kbps in the normal operation mode and 1Mbps in the very high speed operation mode while maintaining RS-232 output levels. Table 1: Order Codes Type Temperature Range Package Comments ST3237ECD 0 to 70 °C SO-28 (Tube) 27parts per tube / 12tube per box ST3237EBD -40 to 85 °C SO-28 (Tube) 27parts per tube / 12tube per box ST3237ECDR 0 to 70 °C SO-28 (Tape & Reel) 1000 parts per reel ST3237EBDR -40 to 85 °C SO-28 (Tape & Reel) 1000 parts per reel ST3237ECPR 0 to 70 °C SSOP-28 (Tape & Reel) 1350 parts per reel ST3237EBPR -40 to 85 °C SSOP-28 (Tape & Reel) 1350 parts per reel ST3237E ±15KV ESD-PROTECTED, 1µA, 3 TO 5.5V, 250KBPS, RS-232 TRANSCEIVER WITH STAND-BY SSOP SOP Rev. 5

Table 2: Pin Description PlN N° SYMBOL NAME AND FUNCTION

1 C2+ Positive Terminal of Inverting Charge Pump Capacitor

2 GND Ground

3 C2- Negative Terminal of Inverting Charge Pump Capacitor

4 V- -5.5V Generated by the Charge Pump

5 T1OUT First Transmitter Output Voltage

6 T2OUT Second Transmitter Output Voltage

7 T3OUT Third Transmitter Output Voltage

8 R1IN First Receiver Input Voltage

9 R2IN Second Receiver Input Voltage

10 T4OUT Fourth Transmitter Output Voltage

11 R3IN Third Receiver Input Voltage

12 T5OUT Fifth Transmitter Output Voltage

13 EN Receiver Enable, Active Low

14 SHDN Shutdown Control, Active Low

15 VHSCI Very High Speed Control Input. Connected to GND for normal operation; connected to VCC for 1Mbps transmission rates. 16 R1OUTB Non Inverting Complementary Receiver Output. Always Active.

17 T5IN Fifth Transmitter Input Voltage

18 R3OUT Third Receiver Output Voltage

19 T4IN Fourth Transmitter Input Voltage

20 R2OUT Second Receiver Output Voltage

21 R1OUT First Receiver Output Voltage

22 T3IN Third Transmitter Input Voltage

23 T2IN Second Transmitter Input Voltage

24 T1N First Transmitter Input Voltage

25 C1- Negative Terminal of Voltage-Doubler Charge Pump Capacitor

26 VCC Supply Voltage

27 V+ 5.5V Generated by the Charge Pump

28 C1+ Positive Terminal of Voltage-Doubler Charge Pump Capacitor

Figure 1: Pin Configuration Table 3: Absolute Maximum Ratings Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditi on is not implied. V+ and V- can have a maximum magnitude of +7V, but their absolute addition can not exceed 13 V. Table 4: Shutdown And Enable Control Truth Table Table 5: ESD Performance: Transmitter Outputs, Receiver Inputs Symbol Parameter Value Unit VCC Supply Voltage -0.3 to 6 V V+ Doubled Voltage Terminal -0.3 to 7 V V- Inverted Voltage Terminal 0.3 to -7 V V+ +|V-| 13 V TIN Transmitter Input Voltage Range -0.3 to 6 V SHDN, EN -0.3 to 6 V VHSCI Very High Speed Control Input -0.3 to (V CC +0.3) V RIN Receiver Input Voltage Range ± 25 V TOUT Transmitter Output Voltage Range ± 13.2 V ROUT, ROUTB Receiver Output Voltage Range -0.3 to (V CC + 0.3) V tSHORT Short Circuit Duration on TOUT (one at a time) Continuous Tstg Storage Temperature Range -65 to 150 °C SHDN EN T-OUT R-OUT R-OUTB 0 0 High Z Active Active 0 1 High Z High Z Active 1 0 Active Active Active 1 1 Active High Z Active Symbol Parameter Test Conditions Min. Typ. Max. Unit ESD ESD Protection Voltage Human Body Model ±15 kV ESD ESD Protection Voltage IEC-1000-4-2 Contact Discharge ±8k V

Table 6: Electrical Characteristics (C1 - C4 = 0.1µF, VCC = 3V to 5.5V, TA = -40 to 85°C, unless otherwise specified. Typical values are referred to T A = 25°C) Table 7: Logic Input Electrical Characteristics (C1 - C4 = 0.1µF, VCC = 3V to 5.5V, TA = -40 to 85°C, unless otherwise specified. Typical values are referred to T A = 25°C) Note 1: Transmitter input hysteresis is typically 250mV Table 8: Transmitter Electrical Characteristics (C1 - C4 = 0.1µF tested at 3.3V±10%, VCC = 3V to 5.5V, TA = -40 to 85°C, unless otherwise specified. Typical values are referred to T A = 25°C) Table 9: Receiver Electrical Characteristics (C1 - C4 = 0.1µF tested at 3.3V±10%, VCC = 3V to 5.5V, TA = -40 to 85°C, unless otherwise specified. Typical values are referred to T A = 25°C) Symbol Parameter Test Conditions Min. Typ. Max. Unit ISUPPLY VCC Power Supply Current SHDN =VCC No Load 0.3 1 mA ISHDN Shutdown Supply Current SHDN =GNDVT_IN=GND or VCC 15 µA Symbol Parameter Test Conditions Min. Typ. Max. Unit VTIL Input Logic Threshold Low (Note 1) T-IN, VHSCI, EN, SHDN 0.8 V VTIH Input Logic Threshold High T-IN, VHSCI, EN , SHDN VCC = 3.3V 2 V VCC = 5V 2.4 IIL Input Leakage Current T-IN, VHSCI, EN , SHDN ± 1.0 µA VHYS Transmitter Input Hysteresis 0.25 V Symbol Parameter Test Conditions Min. Typ. Max. Unit VTOUT Output Voltage Swing All Transmitter outputs are loaded with 3KΩ to GND ± 5 ± 5.4 V RTOUT Transmitter Output Resistance V CC = 0V V OUT = ± 2V 300 10M Ω ISC Output Short Circuit Current ± 60 mA ITOL Output Leakage Current V CC = 0V or 3.3V to 5.5V VOUT = ± 12V Transmitters Disable ± 25 µA Symbol Parameter Test Conditions Min. Typ. Max. Unit IOL Output Leakage Current Receiver Disabled EN = VCC ± 0.05 ± 10 µA VOL Output Voltage Low I OUT = 1mA 0.4 V VOH Output Voltage High I OUT = -1mA V CC-0. VCC-0.1 V VRIN Receiver Input Voltage Operating Range -25 25 V VRIL RS-232 Input Threshold Low TA = 25°C V CC = 3.3V 0.6 1.1 V TA = 25°C V CC = 5V 0.8 1.5 VRIH RS-232 Input Threshold High TA = 25°C V CC = 3.3V 1.5 2.4 V TA = 25°C V CC = 5V 1.2 2.4 VRIHYS Input Hysteresis 0.3 V RRIN Input Resistance T A = 25°C 3 5 7 K Ω

Table 10: Timing Characteristics (C1 - C4 = 0.1µF tested at 3.3V±10%, VCC = 3V to 5.5V, TA = -40 to 85°C, unless otherwise specified. Typical values are referred to T A = 25°C) Transmitter Skew is measured at the transmitter zero cross points Symbol Parameter Test Conditions Min. Typ. Max. Unit DR Maximum Data Rate R L = 3KΩ CL= 1000pF one transmitter switching VHSCI=GND

250 Kbps

RL = 3KΩ CL= 250pF one transmitter switching VHSCI=VCC VCC= 3 to 4.5V

1000 Kbps

RL = 3KΩ CL= 1000pF one transmitter switching VHSCI=VCC VCC= 4.5 to 5.5V Propagation Delay Input to Output RIN to ROUT CL = 150pF 0.15 µs tPHLR tPLHR Propagation Delay Input to Output RL = 3kΩ CL = 1000pF VHSCI=VCC VHSCI=GND 400 1000 ns ns tT_SKEW Transmitter Skew |t PHL - tTLH| VHSCI=GND 300 ns |tPHL - tTLH| VHSCI=V CC 50 ns tR_SKEW Receiver Skew |t PHL - tTLH| 100 ns tOER Receiver Output Enable Time Normal Operation 50 ns tODR Receiver Output Disable Time Normal Operation 120 ns SRT Transition Slew Rate T A = 25°C RL = 3 to 7KΩ VCC = 3.3V measured from +3V to -3V or -3V to +3V CL = 150pF to 1000pF VHSCI=GND CL = 150pF to 1000pF VHSCI=V CC CL = 150pF to 2500pF VHSCI=GND 150 V/µs V/µs V/µs

Figure 2: Application Circuits Table 11: Capacitance Value ( µF) VCC C1 C2 C3 C4 Cbypass

Figure 9: IEC 1000-4-2 Current Waveform Table 12: Characteristics Of The ESD Generator Level Indicated Voltage First Peak Current of Discharge (± 10%) Rise Time With Discharge Switch Current at 30 ns (± 30%) Current at 60 ns (± 30%) 1 2 KV 7.5 A 0.7 to 1ns 4 A 2 A 2 4 KV 15 A 0.7 to 1ns 8 A 4 A 3 6 KV 22.5 A 0.7 to 1ns 12 A 6 A 4 8 KV 30 A 0.7 to 1ns 16 A 8 A

DIM. mm. inch A 2.65 0.104 a1 0.1 0.3 0.004 0.012 b 0.35 0.49 0.014 0.019 b1 0.23 0.32 0.009 0.012 C 0.5 0.020 c1 45˚ (typ.) D 17.70 18.10 0.697 0.713 E 10.00 10.65 0.393 0.419 e 1.27 0.050 e3 16.51 0.650 F 7.40 7.60 0.291 0.300 L 0.50 1.27 0.020 0.050 S˚ ( m a x . ) SO-28 MECHANICAL DATA 0016023

DIM. mm. inch A 2 0.079 A1 0.050 0.002 b 0.22 0.38 0.009 0.015 c 0.09 0.25 0.004 0.010 e 0.65 BSC 0.0256 BSC K0 ˚ 10˚ 0˚ 10˚ SSOP28 MECHANICAL DATA

DIM. mm. inch A 330 12.992 C 12.8 13.2 0.504 0.519 D 20.2 0.795 N 60 2.362 T 30.4 1.197 Ao 10.8 11.0 0.425 0.433 Bo 18.2 18.4 0.716 0.724 Ko 2.9 3.1 0.114 0.122 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 0.476 Tape & Reel SO-28 MECHANICAL DATA

DIM. mm. inch A 330 12.992 C 12.8 13.2 0.504 0.519 D 20.2 0.795 N 60 2.362 T 22.4 0.882 Ao 8.4 8.6 0.331 0.339 Bo 10.7 10.9 0.421 0.429 Ko 2.9 3.1 0.114 0.122 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 0.476 Tape & Reel SSOP28 MECHANICAL DATA

Table 13: Revision History Date Revision Description of Changes 21-Mar-2005 5 TSSOP has been removed.

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners © 2005 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America