SST75C SUNTSU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Ceramic Stratum 3 SMT 10 Pad CMOS (VC)TCXO 7.0mm x 5.0mm Call: +1-949-783-7300 | Fax: +1-949-783-7301 Specifications are subject to change without notice. www.suntsu.com Suntsu Electronics, Inc. 142 TECHNOLOGY DR., SUITE 150 IRVINE, CA 92618

  • Stratum 3 (Overall ±4.6ppm )
  • CMOS
  • (VC)TCXO
  • Tape and Reel
  • Base Stations
  • Stratum 3
  • Small Cell Features Applications Frequency Range Holdover Stability Storage Temperature Freq. Stability vs. Op Temp. Supply Voltage (VDD) - 3.3V Option Supply Voltage (VDD) - 5.0V Option See part numbering guide for options. 3.3 5.0 MHz ppm ppm V V +0.37 +125 3.465 5.250 -0.37 -55 -0.28 3.135 4.750 Current (IDD) Voltage (VC, VCTCXO) - 3.3V Option Voltage (VC, VCTCXO) - 5.0V Option mA V V 2.5 2.5 0.5 0.5 +0.28 Operating Temperature See part numbering guide for options.°C +85-40 Frequency Tolerance at +25ºC ppm -4.6 +4.6 Pullability (VCTCXO) Output Logic LOW Level (VOL) Tri-State Input Voltage (Enabled) Output Load (CMOS) Tri-State Input Voltage (Disabled) Start-Up Time VC Input Impedance (VCTCXO) See part numbering guide for options. ppm V pF V V ms ±8.0 0.1*VDD 0.3*VDD ±5.0 0.7*VDD Phase Noise (Typical) 100Hz Offset Phase Noise (Typical) 1KHz Offset Phase Noise (Typical) 10KHz Offset -120 -140 kΩ dBc/Hz dBc/Hz 100 Symmetry (Duty Cycle) ns 5 Linearity (VCTCXO) % 10 -148dBc/Hz Rise (TR) And Fall (TF) Time Output Logic HIGH Level (VOH) V 0.9*VDD TypicalUnitsElectrical Parameters Maximum RemarksMinimum SST 75 C 33 S 48 V F - 10.000M Cage Code: 4GUT4 To customize your parameters contact a Suntsu representative. * Option U is available only for -20°C to +70°C SUNTSU TCXO 7.0mm x 5.0mm CMOS Part Numbering Guide COMPLIANT FREQUENCY STABILITY FREQUENCY F : ±0.50ppm S : ±0.37ppm T : ±0.28ppm *U : ±0.14ppm 07 : 0°C - +70°C 16 : -10°C - +60°C 27 : -20°C - +70°C 48 : -40°C - +85°C MHz SUPPLY VOLTAGE 33 : 3.3V±5% 50 : 5.0V±5% PULLABILITY BLANK : TCXO F : ±8.0ppm G : ±5.0ppm TCXO/VCTCXO BLANK : TCXO V : VCTCXO OPERATING TEMPERATURE RANGE

Ceramic Stratum 3 SMT 10 Pad CMOS (VC)TCXO 7.0mm x 5.0mm Call: +1-949-783-7300 | Fax: +1-949-783-7301 Specifications are subject to change without notice. www.suntsu.com Suntsu Electronics, Inc. 142 TECHNOLOGY DR., SUITE 150 IRVINE, CA 92618 All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale. Outline Drawing & Land Pattern Test Circuit (CMOS) Typical Phase Noise Performance (Measured By Agilent E5052A) Waveform (CMOS) Frequency - 12.288MHz Frequency - 16.000MHz

Ceramic Stratum 3 SMT 10 Pad CMOS (VC)TCXO 7.0mm x 5.0mm Call: +1-949-783-7300 | Fax: +1-949-783-7301 Specifications are subject to change without notice. www.suntsu.com Suntsu Electronics, Inc. 142 TECHNOLOGY DR., SUITE 150 IRVINE, CA 92618 Typical Jitter Performance (Measured By Agilent E5052A) Tp (Time At 260°C. 20-40 Sec) TI (Time Above 217°C. 60-150Sec) Ts (Preheat Time. 60-180Sec) T 25°C to Peak (480Sec Max) Rup (Ramp Up, 3°C/Sec Max) Rdn (Ramp Down, 6°C/Sec Max) Temperature (°C) 260 217 200 150 Time (sec) Reflow Profile Part Marking Tape And Reel Dimensions 1,000pcs/Reel Frequency - 12.288MHz Frequency - 16.000MHz All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.

Ceramic Stratum 3 SMT 10 Pad CMOS (VC)TCXO 7.0mm x 5.0mm Call: +1-949-783-7300 | Fax: +1-949-783-7301 Specifications are subject to change without notice. www.suntsu.com Suntsu Electronics, Inc. 142 TECHNOLOGY DR., SUITE 150 IRVINE, CA 92618 Mechanical Shock Vibration MIL-STD-202, Method 213, Condition B MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 1010, Condition B MIL-STD-883, Method 1014, Condition A Moisture Resistance MIL-STD-883, Method 1004MIL-STD-883, Method 1014, Condition C Resistance to Solvents MIL-STD-202, Method 215MIL-STD-883, Method 2003 Temperature Cycling Fine Leak Test Gross Leak Test Solderability Resistance to Soldering Heat MIL-STD-202, Method 210, Condition KJ-STD-020, MSL 1Moisture Sensitivity Environmental Specifications Mechanical Specifications