SSRMP TEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Standard “mini puck” package.
  • LED indicator.
  • Triac outputs.
  • 10A, 16A & 25A rms versions.
  • DC input version.
  • 240 & 480 Vac Line voltage.
  • 4000V rms isolation.
  • Quick connect style terminals.
  • Panel mountable. Input Specifications Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. “Mini Puck” Solid State Relay Parameter Units DC Input Control Voltage Range VIN VDC 4 - 32 Must Operate Voltage VIN(OP) (Min.) VDC 4 Must release Voltage VIN(REL) (Min.) VDC 1 Input Current (Max.) mA 1 - 20 Typical Part Number SSRMP -240 D 10 R 1. Basic Series: SSRMP = “mini puck” triac output solid state reply 2. Line Voltage: 240 = 24 - 280 VAC 480 = 48 - 480 VAC 3. Input Type & Voltage: D = 4 - 32 VDC constant current 4. Maximum Switchin Rating: 10 = 10A rms, mounted to heatsink 16 = 16A rms, mounted to heatsink 25 = 25A rms, mounted to heatsink 5. Options: Blank = Zero voltage turn-on R = Random volage turn-on SSRMP-240D10 SSRMP-480D10 SSRMP-240D10R SSRMP-480D10R SSRMP-240D25 SSRMP-480D25 SSRMP-240D25R SSRMP-480D25R Solid State Relay SSRMP Series 05-2020, Rev. 0520 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. Potter & Brumfield

Output Specification (@ 25°C, unless otherwise specified) Heatsink Recommendations

  • We recommend that solid state relay modules be mounted to a heatsink sufficient to maintain the module’s base temperature at 85°C under worst case ambient temperature and load conditions.
  • The heatsink mounting surface should be a smooth (30-40 micro-inch finish), flat (30-40 micro-inch flatness across mating area), un-painted surface which is clean and free of oxidation.
  • An even coating of thermal compound (Dow Corning DC340 or equivalent) should be applied to both the heatsink and module mounting surfaces and spread to a uniform depth of .002” to eliminate all air pockets. Parameter Nom. Line Voltage Conditions Units 10A Models 16A Models 25A Models Load Voltage Range VL

240 Vrms 24-280

480 Vrms 48-480

Load Current Range IL* 240 & 480 Resistive A 10 16 25 Single Cycle Surge Current A 100 160 208 Leakage Current (Off-State) (@rated voltage) f=60Hz. VL =Nom mA 5 On-State Voltage Drop (@rated current) IL = Max. Vrms 1.6 Static dv/dt (Off-State) (Min.) V/µs 400 475 Repetitive Peak Off-State Voltage 240 Vrms 600 480 800 I2T Rating 240 & 480 A2Sec 55 144 259 Zero Turn-On Voltage Vpk 15 Thermal Resistance, Junction to case (R0J-C) Turn -On Time (Max.) f= 60/ 50 Hz. ms 10 for Zero Voltage Turn-On 0.1 for Random Voltage Turn-On Turn -Off Time (Max.) 10 for Zero Voltage Turn-On 8.3/10 for Random Voltage Turn-On * See Derating curve Electrical Characteristics (Thermal Derating Curves) Solid State Relay SSRMP Series (Continued) 05-2020, Rev. 0520 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. Potter & Brumfield