SSRDC TEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Standard “hockey puck” package.
  • LED indicator.
  • 12, 25 & 40A versions.
  • 200V DC output types.
  • DC input and output versions.
  • 1500V DC optical isolation.
  • Cover design with anti-rotation barriers Input Specifications Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRDC-200D12 SSRDC-200D25 SSRDC-200D40 DC Load Solid State Relay Hockey Puck Parameter Units SSRDC-200D12 SSRDC-200D25 SSRDC-200D40 Control Voltage Range VIN VDC 3.5 - 32 Must Operate Voltage VIN(OP) (Min.) VDC 3.5 Must release Voltage VIN(REL) (Min.) VDC 1 Input Current (Max.) mA 30 Typical Part Number SSRDC -200 D 25 1. Basic Series: SSRDC = DC Load hockey puck solid state relay 2. Line Voltage: 200VDC 3. Input Type & Voltage: D = 3.5 - 32VDC 4. Maximum Switching Rating: 12 = 12A, mounted to heatsink 25 = 25A, mounted to heatsink 40 = 40A, mounted to heatsink Solid State Relay SSRDC Series 02-2018, Rev. 0218 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, avai- lable at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifi- cations are subject to change. Potter & Brumfield

Output Specifications (@ 25° C, unless otherwise specified) Heatsink Recommendations

  • We recommend that solid state relay modules be mounted to a heatsink sufficient to maintain the module’s base temperature at less than 85°C under worst case ambient temperature and load conditions.
  • The heatsink mounting surface should be a smooth (30-40 micro-inch finish), flat (30-40 micro-inch flatness across mating area), un-painted surface which is clean and free of oxidation.
  • An even coating of thermal compound (Dow Corning DC340 or equivalent) should be applied to both the heatsink and module Operating Diagrams
  • The module should be mounted to the heatsink using two #8 screws. Parameter Units 12A Models 25A Models 40A Models Load Voltage Range VL VDC 200 200 200 Load Current Range IL * A 12 25 40 Single Cycle Surge Current A 120 120 200 Leakage Current (Off-State) @Rated Current mA 12 12 12 On-State Voltage Drop @Rated Current VDC 2.83 2.83 2.83 Turn-On Time (Max.) µs 600 600 600 Turn-Off Time (Max.) µs 2600 2600 2600 Thermal Resistance, Junction to Case °C/W 0.7 0.7 0.5 * See Derating curve * Overall height dimensions includes with clear cover Dimensions in mm Outline Dimensions Electrical Characteristics (Thermal Derating Curves) Solid State Relay SSRDC Series (Continued) 02-2018, Rev. 0218 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chap- ters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifi- cations are subject to change. Potter & Brumfield