SSR2010J SSDI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Solid State Devices, Inc.

14701 Firestone Blvd * La Mirada, Ca 90638

Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet FEATURES:

  • PIV: 100 Volts
  • Average Output Current 25 Amps
  • Low Reverse Leakage Current
  • Low Forward Voltage Drop
  • Guard Ring for Overvoltage Protection
  • Isolated Hermetically Sealed Package
  • Custom Lead Forming Available
  • Eutectic Die Attach
  • Ultrasonic Aluminum Wire Bonds
  • 175°C Operating Junction Temperature
  • TX, TXV, and Space Level Screening Available. Consult Factory. SSR2010J Series

20 AMPS

100 VOLTS

TO-257(J) MAXIMUM RATINGS 1/ Symbol Value Unit Peak Repetitive Reverse Voltage and DC Blocking Voltage VRRM VRWM VR Average Rectified Forward Current 2/ (Resistive Load, 60 Hz, Sine Wave, TA = 25°C) IO 20 Amps Peak Surge Current 2/ (8.3 ms Pulse, Half Sine Wave, Superimposed on Io, Allow Junction to reach equilibrium between pulses, T A = 25°C) IFSM 300 Amps Operating and Storage Temperature TOP & Tstg -65 to +175 °C Maximum Thermal Resistance 2/ (Junction to Case) RθJC 1.0 °C/W Available in the Following Configurations: Rectifier: SSR2010J, SSR2010JDB, and SSR2010JUB Common Cathode Centertap: SSR2010CTJ, SSR2010CTJDB, and SSR2010CTJUB (See Data Sheet RS0073) Common Anode Centertap: SSR2010CAJ, SSR2010CAJDB, and SSR2010CAJUB (See Data Sheet RS0073) NOTE: 1/ at room temperature, unless otherwise specified 2/ pins 2 and 3 connected together NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0087G DOC

ELECTRICAL CHARACTERISTICS (per leg) Symbol Max Unit Instantaneous Forward Voltage Drop (TA = 25°C, 300 µs Pulse) IF = 10 A IF = 15 A IF = 20 A VF1 VF2 VF3 0.8 0.97 1.00 Volts Instantaneous Forward Voltage Drop (TA = -55°C, 300 µs Pulse) IF = 10 A VF4 0.93 Volts Reverse Leakage Current (Rated VR, 300 µs pulse minimum) TA = 25°C TC = 100°C IR1 IR2 200 µA mA Junction Capacitance (VR = 10 Vdc, TA = 25°C, f = 1MHz) CJ 800 pf TO-257 with Bent Down Leads (JDB Suffix) CASE OUTLINE: TO-257 (Suffix J) PIN OUT: Rectifier Configuration PIN 1: CATHODE PIN 2: ANODE PIN 3: ANODE NOTE: pins 2 and 3 must be externally connected together for optimal performance TO-257 with Bent Up Leads (JUB Suffix) TYPICAL OPERATING CURVES (TA = 25 o C, Unless Otherwise Specified) Solid State Devices, Inc. Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR2010J Series NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0087G DOC