SSR0845CA-5 SSDI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Designer's Data Sheet SOLID STATE DEVICES, INC. 14830 Valley View Ave. * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 FEATURES:

8 AMP 1/

45 VOLTS

80 Amps

R 2JC 7.0 Peak Repetitive Reverse and DC Blocking Voltage Peak Surge Current 2/ (8.3 ms Pulse, Half Sine Wave Superimposed on Io, allow junction to reach equilibrium between pulses, TC = 25oC) Maximum Thermal Resistance 3/ Junction to Case Average Total Rectified Forward Current (Resistive Load, 60Hz, Sine Wave, TC = 25 oC oC/W NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0023A

  • Extremely Low Forward Voltage Drop
  • Hermetically Sealed
  • Guard Ring for Overvoltage Protection
  • Eutectic Die Attach
  • 150 oC Operating Junction Temperature
  • TX, TXV and Space Level Screening Available oC-65 TO +165 -65 TO +200 T OP T STG Operating and Storage Temperature Notes: 1/ 4 Amps per leg; 8 Amps total output. 2/ Per leg. Each leg surged independantely from the other leg. 3/ Both legs tied together.

SOLID STATE DEVICES, INC. 14830 Valley View Ave. * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 1mAReverse Leakage Current (Rated VR , TA = 100oC, 300 :s min Pulse) 5IR2 pF350C J Junction Capacitance (VR = 10 VDC , TA = 25oC, f = 1 MHz) Reverse Leakage Current (Rated VR , TA = 25oC, 300 :s min Pulse) IR1 :A CASE OUTLINE: JEDEC TO-5 Electrical Characteristics (per leg) SYMBOL UNITS MAXIMUM V F1 V F2 V F3 0.48 0.56 0.68 Instantaneous Forward Voltage Drop (TA = 25oC, 300 - 500:s Pulse) V DC 100 SSR0845CA/5 V F4 0.63Instantaneous Forward Voltage Drop (IF = 2 ADC, TA = -55oC, 300 - 500:s Pulse) V DC IF = 1 ADC IF = 2 ADC IF = 4 ADC PIN OUT: PIN 1: CATHODE PIN 2: CATHODE PIN 3: ANODE CASE: ANODE APPLICATION NOTES: 1/ VF as measured between Pins 1 and 2 within .100" from the case, and Pin 3 directly at the case.