SSR050D060 SENSITRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

DATASHEET 5063, REV. -

  • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 •
  • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • Page 1 SENSITRON SEMICONDUCTOR SSR050D060 600V, 50A, Solid State DC Contactor Applications:
  • Main DC Bus Switch
  • DC Motor Bus Switch
  • Battery Disconnect
  • Bus Discharge
  • DC Contactor Description: Sensitron has developed a small footprint High Voltage/High Current DC solid state Relay/Contactor. This device incorporates the latest state of the art technology to reduce the “on” state power losses and voltage drop to a minimum. The device is a true four terminal relay, not needing additional power sources for bias. This device uses robust magnetic coupling to achieve high isolation, reliability, and long life. Unlike opto-isolation techniques this device will not degrade with time. The input control lead will accept any voltage from 4.6V to 36VDC. Features:
  • 2000V Input to Output Isolation
  • 600V Blocking, 50A Continues Current
  • 400A Surge Capability
  • -55 to 100 oC Operation
  • Single wide range DC input signal 4.6V to 36V
  • Low Power Control, .5W Typ.
  • True Four Terminal Operation
  • Low “on” state resistance .015 ohms
  • Fast turn on/turn off, less than 1 us
  • High Current Terminals
  • Three Point Mounting Plate
  • Tjc ≤ .33 oC/W Input Control Specifications: Parameter Description MIN TYP MAX Unit Vcontrol DC Control Voltage Between pins 1 and 2 4.6 36 Volts Icontrol Input Current at control pins 1 and 2, Vin = 4.6V to 36V 10 25 150 mA Pcontrol Control Input Power Consumption .5 .69 watt Gain Iout/Iin, Vin=12V Vin=28V 1200 2800

DATASHEET 5063, REV. -

  • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 •
  • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • Page 2 SENSITRON SEMICONDUCTOR SSR050D060 Fig. 1-Typical Input Current vs. Input Volt Fig.2- Typical Control Input Power Output Specifications: Parameter Description MIN TYP MAX Unit Vout Blocking Voltage Across Pins 3 and 4 0 600 Vdc Ileak Output leakage Current at Vout=600V,Tj=25 oC Tj=150 oC 250 uAdc Iout “Contact” Current 0 50 Adc Isurge Output Surge Current Capability 400 Apeak Ron “Contact Resistance” Iout=50A, Tj=25 oC Tj=150 oC .02 .05 Ohm Vdrop Voltage drop at Iout=50A .75 Vdc Cout Capacitance, VDS=100 V, f=1 MHz 1000 pF Ilatch Over Current latch, at 25 oC 400 A(peak) Eas Avalanche energy, single pulse 1950 mJ Vsd Reverse Diode forward voltage, Iout=44 A, Tj=25 °C .9 1.2 Vdc trr Reverse recovery time 600 ns 0.1 0.2 0.3 0.4 0.5 0.6 0 5 10 15 20 25 30 35 40 Pin (w) Vin(Vdc) 0.02 0.04 0.06 0.08 0.1 0.12 0 1 02 03 04 0 Vin(Vdc) Iin(A)

DATASHEET 5063, REV. -

  • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 •
  • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • Page 3 SENSITRON SEMICONDUCTOR SSR050D060 Switching Characteristics: Parameter Description MIN TYP MAX Unit ton “Contact” turn on time .4 1 us toff “Contact” turn off time .4 1 us tdon Delay from input command to contact on 1.5 ms tdoff Delay from input command to contact off .5 ms tdlatch Delay to latch after detection of Over Current 50 us Fswitch Repetitive on to off switching frequency 600 Hz Fig. 3, Input vs. Output Timing Fig.4 – Over Current Fault Shut Down Typical Vdrop vs. Current @Tj=25C Typical Vdrop vs. Current @Tj=150C

DATASHEET 5063, REV. -

  • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 •
  • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • Page 4 SENSITRON SEMICONDUCTOR SSR050D060 Typical Ron vs. Temp Blocking Voltage vs. Temp Environmental Parameter Description MIN TYP MAX Unit Top Operating Temperature (base Plate) -55 100 oC Tstor Storage Temperature -55 125 oC Isolation Input to Output 2000 VDC Isolation Input or Output to Case 2000 VDC RθJC Thermal Resistance ..25 .33 oC /W Block Diagram: Fig. 5 – Block Diagram

DATASHEET 5063, REV. -

  • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 •
  • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • Page 5 SENSITRON SEMICONDUCTOR SSR050D060 Pin Assigments: Input – Apply a positive voltage to this pin with respect to pin Gnd to “close” the contacts. Gnd – This is the return pin for the Input control voltage. +OUTPUT – This is the positive terminal of the “contact”. -OUTPUT – this is the return terminal for the +OUTPUT pin. Note: 1. Input pins and output pins are isolated up to 2000VDC 2. The device may be damaged if the input polarity is reversed. 3. The “contact” is uni-polar, a voltage reversal will result in current flow in the internal diode. Mechanical Outline:

DATASHEET 5063, REV. -

  • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 •
  • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • Page 6 SENSITRON SEMICONDUCTOR SSR050D060 Application Notes: A. Input Bias The SSR050D060 will be energized and the “Contact” will be closed, when a positive potential of 4.6VDC to 36VDC is applied between Input and Gnd. The input power consumption will be constant through out the control voltage range therefore the contactor will draw more current at lower control voltages. DC Supply TTL with Buffer Input Driven from TTL with Open Drain Driver

DATASHEET 5063, REV. -

  • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 •
  • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • Page 7 SENSITRON SEMICONDUCTOR SSR050D060 B. Output Load Connection The output circuit is completely floating therefore the Load can be connected to either output terminal. Load connected to +Output Terminal Load Connected to –Output Terminal C. Over Current Disable The SSR050D060 contains an Over Current latch which disables (opens) the contact whenever a large current in excess of 400A is detected. The latch can only be reset be removing and re- applying the input control power. In noisy environments and in applications where high surge currents are encountered, the latch may be triggered prematurely. In these applications the latch circuit can be disabled by placing a short circuit between the over current disable terminals.

DATASHEET 5063, REV. -

  • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 •
  • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • Page 8 SENSITRON SEMICONDUCTOR SSR050D060 D. Contact Protection The user must insure that the peak voltage rating of the SSR050D060 is not exceeded. The SSRXXDXXX family of devices switch at extremely fast speeds, therefore extra care must be taken to suppress voltage transients that are generated when interrupting high currents. Sensitron strongly advises the user to us a snubber network similar in design to the one shown below. This is an energy absorbing snubber that transfers the energy from any parasitic line inductance into the capacitor and then is dissipated through the resistor. The capacitor should be sized so that the captured energy does not charge the capacitor beyond the contacts rated voltage. E. AC Operation The contactor can be used for AC loads if two devices are connected “back to back”.

DATASHEET 5063, REV. -

  • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 •
  • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • Page 9 SENSITRON SEMICONDUCTOR SSR050D060 DISCLAIMER: 1- The information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. Before ordering, purchas ers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user’s units according to the datas heet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.