SSPL6022 GOOD-ARK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

www.goodark.com Page 1 of 7 Rev.1.2 Main Product Characteristics Features and Benefits

Description

Parameter Max. Units I D @ TC = 25°C Continuous Drain Current, V GS @ 10V① 50 ID @ TC = 100°C Continuous Drain Current, V GS @ 10V① 35 I DM Pulsed Drain Current② 200 A Power Dissipation③ 130 W P D @TC = 25°C Linear Derating Factor 1.0 W/°C V DS Drain-Source Voltage 60 V V GS Gate-to-Source Voltage ± 20 V E AS Single Pulse Avalanche Energy @ L=5.6mH 1010 mJ I AS Avalanche Current @ L=5.6mH 19 A T J T STG Operating Junction and Storage Temperature Range -55 to + 175 °C V DSS 60V R DS (on) 20mohm(typ.) I D 50A TO-220 Marking and Pin Assignment Schematic Diagram  Advanced Process T echnology  Special designed for PWM, load switching and general purpose applications  Ultra low on-resistance with low gate charge  Fast switching and reverse body recovery  175 ℃ operating temperature  Lead free product These N-Channel enhancement mode power field effect transistors are produced using our proprietary MOSFET technology. This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are well suited for high efficiency switch mode power supplies.

www.goodark.com Page 2 of 7 Rev.1.2 Thermal Resistance Symbol Characteristics Typ. Max. Units R θJC Junction-to-case③ — 1.15 ℃/W Junction-to-ambient (t ≤ 10s) ④ — 62 ℃/W R θJA Junction-to-Ambient (PCB mounted, steady-state) ④ — ℃/W

Electrical Characteristics

A =25℃ unless otherwise specified Symbol Parameter Min. Typ. Max. Units Conditions V (BR)DSS Drain-to-Source breakdown voltage 60 — — V V GS = 0V, ID = 250μA — 20 23 V GS =10V,I D = 25A R DS(on) Static Drain-to-Source on-resistance — 36 — mΩ T J = 125℃ 2 — 4 V DS = V GS , I D = 250μA V GS(th) Gate threshold voltage — 2.3 — V T J = 125℃ — — 1 V DS = 60V,V GS = 0V I DSS Drain-to-Source leakage current — — 50 μA T J = 125°C 100 V GS =20V I GSS Gate-to-Source forward leakage -100 nA V GS = -20V Q g Total gate charge — 24.6 — Q gs Gate-to-Source charge — 8.1 — Q gd Gate-to-Drain("Miller") charge — 6.4 — nC I D = 50A, V DS =48V, V GS = 10V t d(on) Turn-on delay time — 28 — t r Rise time — 82 — t d(off) Turn-Off delay time — 108 — t f Fall time — 74 — ns V GS =10V, VDD=30V, R L =1.2Ω, R GEN =51Ω ID=25A C iss Input capacitance — 1302 — C oss Output capacitance — 308 — C rss Reverse transfer capacitance — 10 — pF V GS = 0V V DS = 25V ƒ = 1MHz Source-Drain Ratings and Characteristics Symbol Parameter Min. Typ. Max. Units Conditions I S Continuous Source Current (Body Diode) — — 50 A I SM Pulsed Source Current (Body Diode) — — 200 A MOSFET symbol showing the integral reverse p-n junction diode. V SD Diode Forward Voltage — 0.88 1.5 V I S =50A, V GS =0V, T J = 25°C t rr Reverse Recovery Time — 26.6 — ns Q rr Reverse Recovery Charge — 27.8 — nC T J = 25°C, I F =50A, di/dt = 100A/μs

www.goodark.com Page 3 of 7 Rev.1.2 Test Circuits and Waveforms Switch Waveforms: Notes ①The maximum current rating is limited by bond-wires. ②Repetitive rating; pulse width limited by max. junction temperature. ③The power dissipation PD is based on max. junction temperature, using junction-to-case thermal resistance. ④The value of R θJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C ⑤These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of T J(MAX) =175°C. ⑥ The maximum current rating is limited by bond-wires.

www.goodark.com Page 6 of 7 Rev.1.2 Mechanical Data Min Nom Max Min Nom Max ФP1 1.500 0.059 e ϴ1 - 7 - - 7 ϴ2 - 7 - - 7 ϴ3 - 3 - 5 ϴ4 - 3 - 1 Symbol Dimension In Millimeters Dimension In Inches 2.54BSC 0.1BSC TO220 PACKAGE OUTLINE DIMENSION_GN E D ФP A ϴ ce b ϴ ϴ L ϴ ФP1

www.goodark.com Page 7 of 7 Rev.1.2 Ordering and Marking Information Device Marking: SSPL6022 Package (Available) TO220 Operating Temperature Range C : -55 to175 ºC Devices per Unit Package Type Units/ Tube Tubes/Inner Box Units/Inner Box Inner Boxes/Carton Box Units/Carton Box TO220 50 20 1000 6 6000 Reliability Test Program Test Item Conditions Duration Sample Size High Temperature Reverse Bias(HTRB) T j =125℃ to 175 ℃ @ 80% of Max V DSS CES /VR 168 hours 500 hours 1000 hours 3 lots x 77 devices High Temperature Gate Bias(HTGB) T j =125℃ or 175 ℃ @ 100% of Max V GSS 168 hours 500 hours 1000 hours 3 lots x 77 devices