SSOJ

SSOA SYNSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

PRV : 50 - 1000 Volts Io : 1.5 Amperes FEATURES : * High current capability * High surge current capability * High reliability * Low reverse current * Low forward voltage drop * Super fast recovery time * Pb / RoHS Free MECHANICAL DATA : * Case : SMA Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.067 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL SSOASSOBSSOCSSODSSOESSOGSSOJSSOKSSOM UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 105 140 210 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 600 800 1000 V Maximum Average Forward Current Ta = 55 °C IF(AV) 1.5 A Maximum Peak Forward Surge Current 8.3 ms. Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Peak Forward Voltage at IF = 1.5 A. VF 0.95 V Maximum DC Reverse Current Ta = 25 °C IR 5 µA at Rated DC Blocking Voltage Ta = 100 °C IR(H) 50 µA Maximum Reverse Recovery Time ( Note 1 ) Trr 35 ns Typical Junction Capacitance ( Note 2 ) CJ 50 pf Junction Temperature Range TJ - 65 to + 150 °C Storage Temperature Range TSTG - 65 to + 150 °C Notes : ( 1 ) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A. ( 2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC Page 1 of 2 Rev. 05 : March 25, 2005 A 1.7 4.0 RATING IFSM 60 2.0 ± 0.2 2.1 ± 0.2 SMA (DO-214AC) 1.2 ± 0.2 5.0 ± 0.15 4.5 ± 0.15 2.6 ± 0.15 Dimensions in millimeter 1.1 ± 0.3 0.2 ± 0.07

RATING AND CHARACTERISTIC CURVES ( SSOA - SSOM ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF. 2. Rise time = 10 ns max., Source Impedance = 50 ohms. 3. All Resistors = Non-inductive Types. FIG.2 - DERATING CURVE FOR OUTPUT FIG.3 - MAXIMUM NON-REPETITIVE PEAK RECTIFIED CURRENT FORWARD SURGE CURRENT 0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60100 AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.5 - TYPICAL REVERSE CHARACTERISTICS FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 05 : March 25, 2005 60Hz RESISTIVE OR INDUCTIVE LOAD 1.2 0.9 0.6 0.3 1.5 100 10 1.0 0.1 0.01 0.01 1.0 0.1 100 140 0 20 40 60 120 PERCENT OF RATED REVERSE VOLTAGE, (%) PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FORWARD CURRENT, AMPERES REVERSE CURRENT, MICROAMPERES TJ = 25 °C TJ = 100 °C TJ = 25 °C Pulse Width = 300µs 2% Duty Cycle 8.3 ms SINGLE HALF SINE WAVE Ta = 50 °C + 0.5 - 0.25 - 1.0 A Trr 1 cm SET TIME BASE FOR 15 ns/cm SSOA - SSOD SSOE - SSOJ SSOK - SSOM D.U.T. OSCILLOSCOPE ( NOTE 1 ) 1 Ω 50 Ω 10 Ω

50 Vdc

(approx) PULSE GENERATOR ( NOTE 2 )