SSMB75-SP-1.5CCA-EXBV-CF DDK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
http://www.ddknet.co.jp ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. ■ SSMB75 series are connectors for 75 Ω group of SSMB series (50 Ω group). ■ DDK’s originally developed 75 Ω group connectors are super mini size push on type. ■ Strong against distortion by application of closed entry structure. ■ Right Angle type Receptacle (PCB) has from 1 to 5 continuous type. ■ SSMB series are not compatible with. SSMB75 Series 75 Ω SSMB Type Connectors 3P)4 $PNQMJBOU 3P)4 $PNQMJBOU Item Material / Finish Shell (Body) Copper Alloy /Gold plating Contact (Male) Copper Alloy /Gold plating Contact (Female) Copper Alloy /Gold plating Insulator PTFE 121226 Frequency Range DC to 1GHz Characteristic Impedance 75 Ω Lock Type Push On FEATURE SPECIFICATIONS MATERIAL/FINISH ＊ The specifications are typical but may not apply to all connectors. Please check the specifications on each item with its drawing from us when you use. Characteristic Impedance 75 Ω Rated Voltage 250VAC(r.m.s.) Dielectric Withstanding Voltage 500V AC(r.m.s.)for1 minute Insulation Resistance 1000M Ω Mim. at 500V DC Contact Resistance 10m Ω max. Operating Temperature -55 〜 +85℃ Widely used for test instruments, broadcasting equipment, CATV and HDTV etc.
APPLICATIONS
Unit：mm http://www.ddknet.co.jp SSMB75 Series ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. ○Plug ○Receptacle Part Number Applicable Cable Assembly Instruction Crimp Tool P/N SSMB75-SP-1.5CCA-EXBV-CF 1.5CCA-EXBV （Sumitomo Electric Industries）
1 CR-H-1101
Part Number Applicable Cable Assembly Instruction Crimp Tool P/N SSMB75-LP-1.5CW-CR1-CF 1.5C-QEW
3 DIN-4
1.5C-2W Part Number Mounting Hole SSMB75-SR-PC-CF V Part Number Reams Number A B C D E Mounting Hole SSMB75-LR-PC-CF 1 5.70 5.08 V SSMB75-LR-PC-2-CF 2 13.30 12.70 7.62 W SSMB75-LR-PC-3-CF 3 20.92 20.32 15.24 X ʢʣ П П П П П ˘ ˘ П П ʢʣ % & Part Number Applicable Cable Assembly Instruction Crimp Tool P/N SSMB75-SP-1.5CV-CR1-CF 1.5C-2V 2 A-R11.5C-QEV RG-179B/U
Unit：mm http://www.ddknet.co.jp SSMB75 Series ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. ○PCB Mounting Dimensions Pull-out Tool ʢʣ ʢʣ ʢʣ ʢʣ П Mounting Hole V P/N：18M-SSMB75-11897 （Applicable SSMB75-LP-1.5CCA-EXBV Only） Mounting Hole X Mounting Hole Y Mounting Hole Z Mounting Hole W
Unit：mm http://www.ddknet.co.jp SSMB75 Series ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. ○ Assembly Instruction（1） 0VUFS$POEVDUPS 0VUFS+BDLFU ˋ 'FSSVMF *OTVMBUPS 4MFFWF $FOUFS$POEVDUPS*OTVMBUPS ʙ $FOUFS$POEVDUPS %JFT4VSGBDF #PEZ4VSGBDF $POUBDU *OTVMBUPS /PHBQ 4PMEFSJOH $POOFDUPS ① Removing outer jacket Removing outer jacket as left figure. ② Insert ferrule and sleeve Insert ferule into the cable, stretch the outer conductor of the cable and insert sleeve. Cut off the outer conductor of the cable along the sleeve ③ Cutting cable Cut the center conductor and insulator of the cable as left figure. ④ Crimping body Insert the body and crimp it by dies. Crimping body should be equal to body surface and dies surface. ⑤ Soldering contact Solder the contacts into the insulator and center conductor. ⑥ Assemble connector Screw the connector. （Recommended screw torque : 29.4 N・㎝）
Unit：mm http://www.ddknet.co.jp SSMB75 Series ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. ○ Assembly Instruction（2） #PEZ*OTVMBUPS$POUBDU$MBNQ#PEZ'FSSVMF)FBUTISJOLBCMFUVCF 0VUFS$POEVDUPS *OTVMBUPS $FOUFS$POEVDUPS 1SFTPMEFSJOH 6OSBWFMUIFCSBJE $SJNQJOH%JFT ɿ "3 NBY /PHBQ $POUBDU 4PMEFSJOH *OTVMBUPS $BCMFMFOHUIXIJDISFRVJSFGPSUIFDBCMFBTTFNCMZ ɿ ̡ έʔϒϧʹऩॖνϡʔϒɺ ϑΣϧʔϧΛ௨͠ɺ ʣ ֎෦ಋମɺ ઈԑମɺ ෦ಋମʹইΛɹ ͤ͞ͳ͍͜ͱɻ Ґஔʹ͔ͯ͠ΊΔɻ ͷ ɹɹͳ͍͜ͱɻ ίϯλΫτʹΠϯγϡϨʔλΛૠೖ͢Δɻ ϘσΟΛૠೖ͠ɺ కΊ͚Δɻ ʢకΊ͚τϧΫ ɿ /ŋDNʣ ͷΑ͏ʹΫϥϯϓϘσΟͷ )FBUTIJSJOLBCMFUVCF GFSSVMF ① The cable length required for cable assembly. L=L1-6 ③. Disentanglement the outer conductor inserted into the clamp body ④ .Cover the ferrule on the naked outer conductor and crimp. (Crimping Dies : A-R1) ⑤ .Internal conductor contacts and soldering Note) No gaps between the clamp and the body contact. ⑥ .Insert the insulator contact. ② .Cut the cable as fig. ② . Insert the heat-shrinkable tube and ferrule into the cable. （ Note）Please be careful to not damage the outer conductor, insulator and center conductor. ② -1. Pre-soldering the center conductor. （ Note）Please be careful to not deform the insulator by heat #PEZ*OTVMBUPS$POUBDU$MBNQ#PEZ'FSSVMF)FBUTISJOLBCMFUVCF 0VUFS$POEVDUPS *OTVMBUPS $FOUFS$POEVDUPS 1SFTPMEFSJOH 6OSBWFMUIFCSBJE $SJNQJOH%JFT ɿ "3 NBY /PHBQ $POUBDU 4PMEFSJOH *OTVMBUPS $BCMFMFOHUIXIJDISFRVJSFGPSUIFDBCMFBTTFNCMZ ɿ ̡ έʔϒϧʹऩॖνϡʔϒɺ ϑΣϧʔϧΛ௨͠ɺ ʣ ֎෦ಋମɺ ઈԑମɺ ෦ಋମʹইΛɹ ͤ͞ͳ͍͜ͱɻ Ґஔʹ͔ͯ͠ΊΔɻ ͷ ɹɹͳ͍͜ͱɻ ίϯλΫτʹΠϯγϡϨʔλΛૠೖ͢Δɻ ϘσΟΛૠೖ͠ɺ కΊ͚Δɻ ʢకΊ͚τϧΫ ɿ /ŋDNʣ ͷΑ͏ʹΫϥϯϓϘσΟͷ )FBUTIJSJOLBCMFUVCF GFSSVMF Parts Configulration ⑦ .Insert a body and tighten it. Screw toque : 29.4N・cm Cover the heat-shrinkable tube on the root of the connector body and heat up the tube.
Unit：mm http://www.ddknet.co.jp SSMB75 Series ◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice. Moreover, the characteristic and the specification of the published product are the reference values. Please confirm the content with the latest delivery specifications when you use the product. ○ 結線方法（3）ˋ $BCMF 'FSSVMF $FOUFS$POEVDUPS ɹ1SFTPMEFSJOH 0VUFS$POEVDUPS 4IFBUI 4QSFBEUIFUPQ 0VUFS$POEVDUPS #PEZ $POUBDU4MJU %JFT 'FSVMF $POUBDU 4PMEFSJOH 1MBUF NJO )FJHIUBGUFS QSFTTJO *OTVMBUPS ① Cut the cable The cable length required for the cable assembly. L=L+0.3 ② Insert the ferrule. Insert the ferrule into the cable. ③ Terminating a cable and soldering. （ Note）Please be careful to not damage the outer conductor, insulator and center conductor. Pre-soldering the center conductor. （ Note）Please be careful to not deform the insulator by heat ④ Insert body assembly Spread the top of the outer conductor. （ Note) Insert the root of connector body between outer conductor and insulator. （Note）The center conductor is caught in the contact slit enough. ⑤ Crimping Cover the ferrule on the naked outer conductor. Crimp the ferrule. (Crimping Dies : RFD-1) (Note）The gap between body and ferrule is 0.5 max. ⑥ Soldering Solder the contact with center conductor. ⑦ Insert the plate on the top of connector and press-in.