SSIC2020H MMD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com In the event of conflict, the requirements of this specification shall govern. Revision: SSIC020509 A Revisions only with customer approval 1 of 2 Release: AWB Date: 02/06/09 SSI Series – 5 x 7 Spread Spectrum Clock Oscillator ¾ Wide Frequency Range ¾ Direct Drop-in Replacement ¾ EMI Reduction Oscillator ¾ RoHS Compliant ¾ Tape and Reel Available ELECTRICAL SPECIFICATION: Frequency Range 13.000MHZ to 160.000MHZ Center Spread ±0.125% to ±2.00% Spread Spectrum Modulation Down Spread -0.250% to -4.00% Temperature Stability (Inclusive of +25ºC ±3º C and Operating Temperature) (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature Range -55°C to +125°C Supply Voltage (Vdd) +2.50 VDC ±5% +3.30 VDC ±5% 13.000MHZ to 49.999MHZ 20 mA max 50.000MHZ to79.999MHZ 20 mA max 25 mA max 80.000MHZ to 99.999MHZ 25 mA max 30 mA max Supply Current 100.000MHZ to 160.000MHZ 30 mA max 40 mA max Output Type CMOS Symmetry (50% of waveform) (See Part Number Guide for Options) 13.000MHZ to 49.999MHZ 10.0 nSec 50.000MHZ to79.999MHZ 5.0 nSec 8.0 nSec 80.000MHZ to 99.999MHZ 4.0 nSec 5.0 nSec Rise/Fall Time (10% to 90% of Supply Voltage) 100.000MHZ to 160.000MHZ 3.0 nSec 4.0 nSec Load 15pF 50pF max Aging ±3.0 ppm first year, ±1.0 ppm each year after Tri-state Operation Voh = 70% of Vdd min or No Connection to Enable Output Vol = 30% max or grounded to Disable Output (High Impedance) PART NUMBER GUIDE:
5 X 7 Ceramic SMD
Please Consult with MMD Sales Department for any other Parameters or Options Operating Temperature Blank = 0°C to +70°C Symmetry Blank = 40/60% A = 45/55% Packaging Blank = Bulk T = Tape and ReelC = CMOS Output C Supply Voltage Pin 1 Connection H = Tri-state Frequency Stability 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm H 3 = +3.30 VDC 2 = +2.50 VDC
MECHANICAL DIMENSIONS: 5.20 [.205] MAX 1.20 [.047] 1.40 [.055] 5.08 [.200] 5.08 [.200] 4.20 [.165] 2.00 [.079] 2.20 [.087] DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED SUGGESTED LAND PATTERN MXXXXX SYYMML XXXXX PIN 1 INDICATOR LOCATED IN THIS AREA. OUTPUTPIN 8 SUPPLY VOLTAGEPIN 14 PIN CONNECTIONS CASE GROUND PIN 1 PIN 7 TRI-STATE ENVIRONMENTAL/MECHANICAL SPECIFICATION: MARKING DETAIL: Shock MIL-STD-883, Meth 2002, Cond B Solderability MIL-STD-883, Meth 2003 Vibration MIL-STD-883, Meth 2007, Cond A Gross Leak Test MIL-STD-883, Meth 1014, Cond C Fine Leak Test MIL-STD-883, Meth 1014, Cond A Reflow Solder +260ºC for 10 sec max Line 1 = MXXXXX M = MMD COMPONENTS XXXXX = Frequency in MHZ Line 2 = SYYMML S = Internal Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Pin 1 Indicator MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com In the event of conflict, the requirements of this specification shall govern. Revision: SSIC020509 A Revisions only with customer approval 2 of 2 Release: AWB Date: 02/06/09