SSF6007 SILIKRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

www.silikron.com Main Product Characteristics: Features and Benefits: Description: Absolute max Rating: Symbol Parameter Max. Units ID @ TC = 25° C Continuous Drain Current, VGS @ -10V① -130 mA ID @ TC = 100° C Continuous Drain Current, VGS @ -10V① -100 IDM Pulsed Drain Current② -520 PD @TC = 25° C Power Dissipation③ 230 mW VDS Drain-Source Voltage -50 V VGS Gate-to-Source Voltage ± 20 V ESD ESD Rating (HBM module) 1 KV TJ TSTG Operating Junction and Storage Temperature Range -55 to + 150 °C Thermal Resistance Symbol Characterizes Typ. Max. Units RθJA Junction-to-ambient (t ≤ 10s) ④ — 556 ℃/W Junction-to-Ambient (PCB mounted, steady-state) ④ — 540 ℃/W VDSS -50V RDS(on) 2.1ohm(typ.) ID -130mA SOT-23 Marking and pin Assignment Schematic diagram  Advanced MOSFET process technology  Special designed for Line current interrupter in telephone sets, Relay , high speed and line transformer drivers and general purpose

applications

 Ultra low on-resistance with low gate charge  Fast switching and reverse body recovery  150℃ operating temperature It utilizes the latest processing techniques to achieve the high cell density and reduces the on-resistance. These features combine to make this design an extremely efficient and reliable device for use in line current interrupter in telephone sets and a wide variety of other applications 6007 6007

www.silikron.com Electrical Characterizes @TA=25℃ unless otherwise specified Symbol Parameter Min. Typ. Max. Units Conditions V(BR)DSS Drain-to-Source breakdown voltage -50 — — V VGS = 0V, ID = -10μA RDS(on) Static Drain-to-Source on-resistance — 2.1 7 Ω VGS=-10V,ID = -130mA VGS(th) Gate threshold voltage -0.8 — -2 V VDS = VGS, ID = -1mA IDSS Drain-to-Source leakage current — — -0.1 μA VDS =-40V,VGS = 0V -1 VDS =-50V,VGS = 0V — — -50 TJ = 125°C IGSS Gate-to-Source forward leakage — — 10 uA VGS =20V — — -10 VGS = -20V gfs Forward Transconductance 50 — — S VDS =-25 V ID =-130m A Ciss Input Capacitance — 45 — pF VGS = 0; VDS = -5 V; f = 1 MHz Coss Output Capacitance — 18 — Crss Reverse Transfer Capacitance — 11 — td(on) Turn–On Delay Time — 3.1 — ns VDD = –15V; ID = –2.5 A; RL = 50ohm tr Rise Time — 1.3 — td(off) Turn–Off Delay Time — 18 — tf Fall Time — 7.5 — Source-Drain Ratings and Characteristics Symbol Parameter Min. Typ. Max. Units Conditions IS Continuous Source Current (Body Diode) — — 130 mA MOSFET symbol showing the integral reverse p-n junction diode. ISM Pulsed Source Current (Body Diode) — — 520 mA VSD Diode Forward Voltage — — -1.3 V IS=-130mA, VGS=0V Notes: ①Calculated continuous current based on maximum allowable junction temperature. ②Repetitive rating; pulse width limited by max. junction temperature. ③The power dissipation PD is based on max. junction temperature, using junction-to-case thermal resistance. ④The value of RθJA is measured with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with TA =25° C

www.silikron.com Fig 1: Transfer Characteristics Fig 2: Output Curve Fig 3: Body Diode Forward Curve Vgs R gen Vin G Vdd Rl Vout S D VIN VOUT 10% 10% 50% 50% PULSE WIDTH INVERTED td(on) 90% tr ton 90% 10% toff td(off) tf 90% VIN VOUT 10% 10% 50% 50% PULSE WIDTH INVERTED td(on) 90%90% tr ton 90% 10% toff td(off) tf 90% Fig 4: Switching Test Circuit Fig 5: Switching Waveforms ID,DRAIN CURRENT (AMPS) VDS,DRAIN-TO-SOURCE VOLTAGE(VOLTS) VSD,DIODE FORWARD VOLTAGE(VOLTS) ID,DIODE CURRENT (AMPS) VG ,GATE-TO-SOURCE VOLTAGE(VOLTS) ID,DRAIN CURRENT (AMPS)

www.silikron.com SOT-23 PACKAGE INFORMATION Dimensions in Millimeters (UNIT:mm) NOTES 1. All dimensions are in millimeters. 2. Tolerance ± 0.10mm (4 mil) unless otherwise specified 3. Package body sizes exclude mold flash and gate burrs. Mold flash at the non -lead sides should be less than 5 mils. 4. Dimension L is measured in gauge plane. 5. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact. Symbol Dimensions in Millimeters MIN. MAX. A 0.900 1.150 A1 0.000 0.100 A2 0.900 1.050 b 0.300 0.500 c 0.080 0.150 D 2.800 3.000 E 1.200 1.400 E1 2.250 2.550 e 0.950TYP e1 1.800 2.000 L 0.550REF L1 0.300 0.500 θ 0° 8°

www.silikron.com Ordering and Marking Information Device Marking: 6007 Package (Available) SOT-23 Operating Temperature Range C : -55 to 150 ºC Devices per Unit Package Type Units/ Tube Tubes/ Inner Box Units/ Inner Box Inner Boxes/ Carton Box Units/ Carton Box SOT23 3000pcs 10pcs 30000pcs 4pcs 120000pcs Reliability Test Program Test Item Conditions Duration Sample Size High Temperature Reverse Bias(HTRB) Tj= 150℃ @ 80% of Max VDSS/VCES/VR 168 hours 500 hours 1000 hours 3 lots x 77 devices High Temperature Gate Bias(HTGB) Tj= 150℃ @ 100% of Max VGSS 168 hours 500 hours 1000 hours 3 lots x 77 devices

www.silikron.com ATTENTION: ■ Any and all Silikron products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your Silikron representative nearest you before using any Silikron products described or contained herein in such applications. ■ Silikron assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all Silikron products described or contained herein. ■ Specifications of any and all Silikron products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. ■ Silikron Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. ■ In the event that any or all Silikron products(including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. ■ No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of Silikron Semiconductor CO.,LTD. ■ Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. Silikron believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. ■ Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the Silikron product that you intend to use. Customer Service Worldwide Sales and Service: Sales@silikron.com Technical Support: Technical@silikron.com Suzhou Silikron Semiconductor Corp. Building 11A Suchun Industrial Square, 428# Xinglong Street, Suzhou P .R. China TEL: (86-512) 62560688 FAX: (86-512) 65160705 E-mail: Sales@silikron.com