SSF5508A GOOD-ARK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
www.goodark.com Page 1 of 6 Rev.3.6 Main Product Characteristics Features and Benefits SSF5508A Top View (TO-263) Advanced trench MOSFET process technology Special designed for convertors and power controls Ultra low on-resistance 175 ℃ operating temperature High Avalanche capability and 100% tested Lead free product
Description
It utilizes the latest trench processing techniques to achieve the high cell density and reduces the on-resistance with high repetitive avalanche rating. These features combine to make this design an extremely efficient and reliable device for use in power switching application and a wide variety of other applications Absolute Max Rating: Symbol Parameter Max. Units ID @ TC = 25°C Continuous Drain Current, VGS @ 10V① 110 ID @ TC = 100°C Continuous Drain Current, VGS @ 10V① 80 IDM Pulsed Drain Current ② 440 ISM Pulsed Source Current.(Body Diode) 440 A Power Dissipation③ 205 W PD @TC = 25°C VDS Drain-Source Voltage 55 V VGS Gate-to-Source Voltage ± 20 V dv/dt Peak diode recovery voltage 35 v/ns EAS Single Pulse Avalanche Energy @ L=0.3mH ② 634 mJ IAR Avalanche Current @ L=0.3mH ② 65 A TJ TSTG Operating Junction and Storage Temperature Range -55 to + 175 °C Thermal Resistance Symbol Characterizes Value Unit R θJC Junction-to-case ③ 0.73 ℃/W R θJA Junction-to-ambient (t ≤ 10s) 50 ℃/W V DSS 55V R DS (on) 4.5mohm （Typ） I D 110A
www.goodark.com Page 2 of 6 Rev.3.6
Electrical Characteristics
A =25℃ unless otherwise specified Symbol Parameter Min. Typ. Max. Units Conditions BVDSS Drain-to-Source breakdown voltage 55 60 — V VGS = 0V, ID = 250μA RDS(on) Static Drain-to-Source on-resistance — 4.5 6 mΩ VGS = 10V, ID = 20A VGS(th) Gate threshold voltage 2 3.1 4 V VDS = VGS, ID = 250μA — — 1 VDS = 55V, VGS = 0V IDSS Drain-to-Source leakage current — — 10 μA VDS = 55V, VGS = 0V, TJ = 150°C Gate-to-Source forward leakage — — 100 VGS =20V IGSS Gate-to-Source reverse leakage -100 — — nA VGS = -20V Qg Total gate charge — 125 147 Qgs Gate-to-Source charge — 24 30 Qgd Gate-to-Drain("Miller") charge — 49 61 Qg(th) Gate charge at shreshold — 16 20 nC Vplateau gate plateau voltage — 4.7 6 V ID=30A VDD=30V VGS=10V td(on) Turn-on delay time — 20 — tr Rise time — 19 — td(off) Turn-Off delay time — 70 — tf Fall time — 30 — ns VDD=30V ID=2A ,RL=15Ω RG=2.5Ω VGS=10V Ciss Input capacitance — 5607 — Coss Output capacitance — 463 — Crss Reverse transfer capacitance — 454 — pF VGS = 0V, VDS = 25V, ƒ = 1.0MHz Source-Drain Ratings and Characteristics Symbol Parameter Min. Typ. Max. Units Conditions IS Maximum Body-Diode Continuous Curren — 110 — A VSD Diode Forward Voltage — 0.77 1 V IS=40A, VGS=0V Trr Reverse Recovery Time — 36 — ns Qrr Reverse Recovery Charge — 57 — nC TJ = 25°C, IF =68A, , di/dt = 100A/μs ton Forward Turn-on Time Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
www.goodark.com Page 5 of 6 Rev.3.6 Typical Electrical and Thermal Characteristics Figure 13: Transient Thermal Impedance Curve Notes: ①The maximum current rating is limited by bond-wires. Repetitive rating; pulse width limited by max. junction temperature.② EAS starting,ID=65A. ③The power dissipation PD is based on max. junction temperature, using junction-to-case thermal resistance. ④The value of R θJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. Switch Waveforms
www.goodark.com Page 6 of 6 Rev.3.6 TO-263 MECHANICAL DATA