SSF3637S GOOD-ARK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
www.goodark.com Page 1 of 4 Rev.1.1 SSF 37S 30V P-Channel MOSFET PACKAGE MARKING AND ORDERING INFORMATION Device Marking Device Device Package Reel Size Tape Width Quantity SSF3637S SSF3637S SOP-8 Ø330mm 12mm 3000 units ABSOLUTE MAXIMUM RATINGS (T A =25℃unless otherwise noted) Parameter Symbol Limit Unit Drain-Source Voltage V DS -30 V Gate-Source Voltage V GS ±20 V I D (25 -6.6 A I D (70 -5.2 A Drain Current-Continuous@ Current-Pulsed (Note 1) I DM -30 A Maximum Power Dissipation P D 3.1 W Operating Junction and Storage Temperature Range T J STG -55 To 150 ℃ THERMAL CHARACTERISTICS Thermal Resistance,Junction-to-Ambient (Note 2) R θJA 75 ℃/W ELECTRICAL CHARACTERISTICS (T A =25℃unless otherwise noted) Parameter Symbol Condition Min Typ Max Unit OFF CHARACTERISTICS Drain-Source Breakdown Voltage BV DSS V GS =0V I D =-250μA -30 V GENERAL FEATURES
- V DS =- 30V,I D =-10A R DS(ON) < 70mΩ @ V GS =-4.5V R DS(ON) < 45mΩ @ V GS =-10V
- High Power and current handing capability
- Lead free product
- Surface Mount Package
DESCRIPTION
The SSF3637S uses advanced trench technology to provide excellent R DS(ON) and low gate charge .This device is suitable for use as a load switch or in PWM applications.
APPLICATIONS
- PWM applications
- Load switch
- Power management Schematic D iagram Marking and P in Assignment S OP T op V iew D G S
www.goodark.com Page 2 of 4 Rev.1.1 SSF 37S 30V P-Channel MOSFET Zero Gate Voltage Drain Current I DSS V DS =-30V,V GS =0V -1 μA Gate-Body Leakage Current I GSS V GS =±20V,V DS =0V ±100 nA ON CHARACTERISTICS (Note 3) Gate Threshold Voltage V GS(th) V DS GS D =-250μA -1 -1.8 -2.1 V V GS =-4.5V, I D =-4.0A 55 70 mΩ Drain-Source On-State Resistance R DS(ON) V GS =-10V, I D =-6.6A 37 45 mΩ Forward Transconductance g FS V DS =-5V,I D =-6.6A 10 S DYNAMIC CHARACTERISTICS (Note4) Input Capacitance C lss 700 PF Output Capacitance C oss 110 PF Reverse Transfer Capacitance C rss V DS =-15V,V GS =0V, F=1.0MHz 80 PF SWITCHING CHARACTERISTICS (Note 4) Turn-on Delay Time t d(on) 9 nS Turn-on Rise Time t r 5 nS Turn-Off Delay Time t d(off) 28 nS Turn-Off Fall Time t f V DS =-15V,V GS =-10V,R GEN =3Ω I D =1A 13 nS Total Gate Charge Q g 15 nC Gate-Source Charge Q gs 2 nC Gate-Drain Charge Q gd V DS =-15V,I D =-6.6A,V GS =-10V 4 nC Body Diode Reverse Recovery Time T rr 24 nS Body Diode Reverse Recovery Charge Q rr I F =-6.6A, dI/dt=100A/µs 15 nC DRAIN-SOURCE DIODE CHARACTERISTICS Diode Forward Voltage (Note 3) V SD V GS =0V,I S =-1A -0.7 -1.2 V NOTES: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. Surface Mounted on 1in FR4 Board, t ≤ 10 sec. 3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%. 4. Guaranteed by design, not subject to production testing.
www.goodark.com Page 4 of 4 Rev.1.1 SSF 37S 30V P-Channel MOSFET SOP-8 PACKAGE INFORMATION NOTES 1. Dimensions are inclusive of plating 2. Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than 6 mils. 3. Dimension L is measured in gauge plane. 4. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.