SSF3365 GOOD-ARK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
www.goodark.com Page 1 of 4 Rev.1.0 SSF 3365 30V P-Channel MOSFET PACKAGE MARKING AND ORDERING INFORMATION Device Marking Device Device Package Reel Size Tape Width Quantity
3365 SSF3365 SOT-23 Ø180mm 8 mm 3000 units
ABSOLUTE MAXIMUM RATINGS (T A =25℃unless otherwise noted) Parameter Symbol Limit Unit Drain-Source Voltage V DS -30 V Gate-Source Voltage V GS ±20 V I D （25 -3 A I D （70 -2.5 A Drain Current-Continuous@ Current-Pulsed (Note 1) I DM -12 A Maximum Power Dissipation P D 1.25 W Operating Junction and Storage Temperature Range T J STG -55 To 150 ℃ THERMAL CHARACTERISTICS Thermal Resistance,Junction-to-Ambient (Note 2) R θJA 100 /W ℃ ELECTRICAL CHARACTERISTICS (T A =25℃unless otherwise noted) Parameter Symbol Condition Min Typ Max Unit OFF CHARACTERISTICS Drain-Source Breakdown Voltage BV DSS V GS =0V I D =-250μA -30 V Zero Gate Voltage Drain Current I DSS V DS =-24V,V GS =0V -1 μA Gate-Body Leakage Current I GSS V GS =±20V,V DS =0V ±100 nA GENERAL FEAT URES
- V DS = -30V,I D = -3A R DS(ON) < 140mΩ @ V GS =-4.5V R DS(ON) < 80mΩ @ V GS =-10V
- High Power and current handing capability
- Lead free product
- Surface Mount Package
DESCRIPTION
The SSF3365 uses advanced trench technology to provide excellent R DS(ON) , low gate charge and operation with gate voltages as low as 2.5V. This device is suitable for use as a load switch or in PWM applications. A PPLICATIONS
- PWM applications
- Load switch
- Power management Schematic D iagram Marking and P in Assignment SOT T op V iew D G S 3365
www.goodark.com Page 2 of 4 Rev.1.0 SSF 3365 30V P-Channel MOSFET ON CHARACTERISTICS (Note 3) Gate Threshold Voltage V GS(th) V DS GS D =-250μA -1 V V GS =-10V, I D =-3A 64 80 Drain-Source On-State Resistance R DS(ON) V GS =-4.5V, I D =-2.5A 100 140 mΩ Forward Transconductance g FS V DS =-10V,I D =-3A 3 S DYNAMIC CHARACTERISTICS (Note4) Input Capacitance C lss 600 PF Output Capacitance C oss 150 PF Reverse Transfer Capacitance C rss V DS =-15V,V GS =0V, F=1.0MHz 95 PF SWITCHING CHARACTERISTICS (Note 4) Turn-on Delay Time t d(on) 10 nS Turn-on Rise Time t r 9 nS Turn-Off Delay Time t d(off) 25 nS Turn-Off Fall Time t f V DD =-15V,I D =-1A V GS =-10V,R GEN =6Ω 8 nS Total Gate Charge Q g 10 nC Gate-Source Charge Q gs 2 nC Gate-Drain Charge Q gd V DS =-15V,I D =-3A,V GS =-10V 2 nC DRAIN-SOURCE DIODE CHARACTERISTICS Diode Forward Voltage (Note 3) V SD V GS =0V,I S =-1.25A -1.2 V NOTES: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. Surface Mounted on 1in FR4 Board, t ≤ 10 sec. 3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%. 4. Guaranteed by design, not subject to production testing.
www.goodark.com Page 4 of 4 Rev.1.0 SSF 3365 30V P-Channel MOSFET SOT-23 PACKAGE INFORMATION Dimensions in Millimeters (UNIT: mm) NOTES 1. All dimensions are in millimeters. 2. Tolerance ±0.10mm (4 mil) unless otherwise specified 3. Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than 5 mils. 4. Dimension L is measured in gauge plane. 5. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact. Dimensions in Millimeters Symbol MIN. MAX. A 0.900 1.150 A1 0.000 0.100 A2 0.900 1.050 b 0.300 0.500 c 0.080 0.150 D 2.800 3.000 E 1.200 1.400 E1 2.250 2.550 e 0.950TYP e1 1.800 2.000 L 0.550REF L1 0.300 0.500 θ 0° 8°