SSF2439E GOOD-ARK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
www.goodark.com Page 1 of 4 Rev.1.0 PACKAGE MARKING AND ORDERING INFORMATION Device Marking Device Device Package Reel Size Tape width Quantity 2439E SSF2439E SOT23-6 Ø180mm 8mm 3000 units ABSOLUTE MAXIMUM RATINGS (T A =25℃unless otherwise noted) Parameter Symbol Limit Unit Drain-Source Voltage V DS -20 V Gate-Source Voltage V GS ±12 V I D -4.5 A Drain Current-Continuous@ Current-Pulsed (Note 1) I DM -18 A Maximum Power Dissipation P D 2.2 W Operating Junction and Storage Temperature Range T J STG -55 To 150 ℃ THERMAL CHARACTERISTICS Thermal Resistance,Junction-to-Ambient (Note 2) R θJA 100 /W℃ GENERAL FEATURES
- V DS = -20V,I D =-4.5A R DS(ON) < 180mΩ @ V GS =-2V R DS(ON) < 100mΩ @ V GS =-2.5V R DS(ON) < 55mΩ @ V GS =-4.5V ESD Rating：2000V HBM
- High Power and current handing capability
- Lead free product
- Surface Mount Package A PPLICATIONS
- Battery protection
- Load switch
- Power management Marking and P in Assignment SOT T op V iew
DESCRIPTION
The SSF2439E uses advanced trench technology to provide excellent R DS(ON) , low gate charge and operation with gate voltages as low as 2.5V. Schematic Diagram
www.goodark.com Page 2 of 4 Rev.1.0 ELECTRICAL CHARACTERISTICS (T A =25℃unless otherwise noted) Parameter Symbol Condition Min Typ Max Unit OFF CHARACTERISTICS Drain-Source Breakdown Voltage BV DSS V GS =0V I D =-250μA -20 V Zero Gate Voltage Drain Current I DSS V DS =-20V,V GS =0V -1 μA Gate-Body Leakage Current I GSS V GS =±10V,V DS =0V ±10 μA ON CHARACTERISTICS (Note 3) Gate Threshold Voltage V GS(th) V DS GS D =-250μA -0.5 -1.2 V V GS =-4.5V, I D =-2.2A 40 55 mΩ V GS =-2.5V, I D =-2.2A 70 100 mΩ Drain-Source On-State Resistance R DS(ON) V GS =-2V, I D =-2.2A 110 180 mΩ Forward Transconductance g FS V DS =-10V,I D =-2.2A 3 S DYNAMIC CHARACTERISTICS (Note4) Input Capacitance C lss 680 PF Output Capacitance C oss 130 PF Reverse Transfer Capacitance C rss V DS =-10V,V GS =0V, F=1.0MHz 140 PF SWITCHING CHARACTERISTICS (Note 4) Turn-on Delay Time t d(on) 6 nS Turn-on Rise Time t r 16 nS Turn-Off Delay Time t d(off) 38 nS Turn-Off Fall Time t f V DD =-10V,I D =-2.2A V GS =-5V,R GEN =4.5Ω 85 nS Total Gate Charge Q g 10 nC Gate-Source Charge Q gs 2 nC Gate-Drain Charge Q gd V DS =-16V,I D =-4.5A, V GS =-5V 3 nC DRAIN-SOURCE DIODE CHARACTERISTICS Diode Forward Voltage (Note 3) V SD V GS =0V,I S =-4.5A -1.2 V NOTES: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. Surface Mounted on 1in FR4 Board, t ≤ 10 sec. 3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%. 4. Guaranteed by design, not subject to production testing.
www.goodark.com Page 4 of 4 Rev.1.0 SOT23-6 PACKAGE INFORMATION Dimensions in Millimeters (UNIT: mm) NOTES： 1. All dimensions are in millimeters. 2. Dimensions are inclusive of plating 3. Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than 6 mils. 4. Dimension L is measured in gauge plane. 5. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.