SSF107

SSF101 GWSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage Ta=100 C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) NOTES: 1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. 3. Thermal Resistance from Junction to Ambient. VOLTAGE RANGE CURRENT

1.0 Ampere

• Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Metallurgically bonded construction * Polarity: Color band denotes cathode end * Mounting position: Any

FEATURES

• Ideal for surface mount applications * Easy pick and place * Built-in strain relief * Fast switching speed Operating and Storage Temperature Range TJ, TSTG at Ta=25 C Dimensions in inches and (millimeters) .106(2.7) .098(2.5) .144(3.65) .136(3.45) .007(0.17) .005(0.13) .067(1.7) .059(1.5) .033(0.85) .022(0.55) .051(1.3) .043(1.1) .037(0.95) .033(0.85) SS Typical Thermal Resistance RqJA (Note 3) SSF101 THRU SSF107

1.0 AMP SURFACE MOUNT FAST RECOVERY RECTIFIERS

SSF101 SSF102 SSF103 SSF104 SSF105 SSF106 SSF107 UNITS 50 100 200 400 600 800 1000 V 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 1.0 5.0 100 V A A V nS pF 1.3 250 500150 -65 +150 C

80 C/W

Marking Code F11 F12 F13 F14 F15 F16 F17 A A 472

RATING AND CHARACTERISTIC CURVES (SSF101 THRU SSF107) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) FIG.5-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,(V) JUNCTION CAPACITANCE,(pF) 0.2 0.4 0.6 0.8 1.0 1.2 (+) (+) 25Vdc (approx.) ( ) ( ) PULSE GENERATOR (NOTE 2) OSCILLISCOPE (NOTE 1) NON- INDUCTIVE W NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. +0.5A -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm trr .01 .05 .1 .5 1 5 10 50 100 D.U.T. FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS NONINDUCTIVE NONINDUCTIVE W W FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWAARD SURGE CURRENT,(A) NUMBER OF CYCLES AT 60Hz 1 10 5 50 100 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method Single Phase Half Wave 60Hz Resistive Or Inductive Load 0 20 40 60 80 100 120 140 160 180 200 AMBIENT TEMPERATURE ( C) 0.1 1.0 .01 FIG.1-TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT,(A) FORWARD VOLTAGE,(V) Pulse Width 300us 1% Duty Cycle 3.0 Tj=25 C 473