SSF-1E-10B MERRIMAC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
General Notes: 1. Single Sideband Modulators are integrated networks composed of an in-phase power divider, two double balanced mixers and at least one 90° quadrature hybrid. 2. The SSF-1E series is suitable for applications where the modulating signal is provided together with one in phase quadrature to it. This permits operation down to DC and eliminates the need for a second 90° quadrature hybrid. 3. Units in the SSF-1E series are suitable where the desired and undesired RF sidebands are too close to be effectively separated with a simple bandpass filter or where minimum group delay is required. 4. Merrimac Single Sideband Modulators are available in various package options. 5. Merrimac Single Sideband Modulators comply with the relevant sections of MIL-M-28837 and may be supplied screened for compliance with additional specifications for military and space applications requiring the highest reliability. PRINCIPAL SPECIFICATIONS Center Usable Model Frequency, Bandwidth, Number fo, MHz MHz SSF-1E-*B 10 - 1000 10% of f o For complete Model Number replace * with desired Center Frequency in MHz. SSF-1E Series SINGLE SIDEBAND MODULATORS 10 to 1000 MHz / 30 dB Sideband Rejection / Quadrature-Phased Baseband Inputs GENERAL SPECIFICATIONS* RF Input Characteristics Impedance: 50 Ω nom. VSWR: 1.5:1 max. RF Power Level: +10 dBm nom. I & Q Modulation Inputs Power Level: -- 3 dBm Bandwidth: DC to 10% of RF Output Characteristics Conversion Loss: 9 dB max. Sideband Rejection: 30 dB min. Carrier Suppression: 25 dB min. Weight, nominal: 0.32 oz (9 g) Operating Temp: -- 55 ° to +85 °C *Device used as upconverter Fo r f u rther infor m at ion contact MERRIMAC/ 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531 NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted. 2. Dimensions in inches over millimeters. 3. Lead dimensions apply only at body. 4. All unmarked pins are case ground. 14Feb96