SS94A1E HONEYWELL-ACC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Interactive Catalog Replaces Catalog Pages Sensing and Control Honeywell Inc.
11 West Spring Street
Freeport, Illinois 61032 Honeywell Sensing and Control has replaced the PDF product catalog with the new Interactive Catalog. The Interactive Catalog is a power search tool that makes it easier to find product information. It includes more installation, application, and technical information than ever before. Click this icon to try the new Interactive Catalog.
Solid State Sensors SS94A Series Analog Position Sensors Honeywell 1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada19
FEATURES
1 Single current sinking or current
1 Improved temperature stability
1 Three pin in-line printed circuit board
1 Standard .100N mounting centers
1 Laser trimmed thin film and thick film
resistors minimize sensitivity variations and compensate for temperature variations
1 Flux range of ±100 to ±2500 gauss
The SS9 utilizes a Hall effect integrated circuit chip which provides increased temperature stability and performance. Laser trimmed thick film resistors on the ceramic substrate and thin film resistors on the integrated circuit reduce null and gain shifts over temperature which results in consistent sensitivity from one device to the next. MOUNTING DIMENSIONS (For reference only) SS9 TYPICAL TRANSFER CHARACTERISTICS SS9 ORDER GUIDE Catalog Listing SS94A1 SS94A1B SS94A1E SS94A1F SS94A2 SS94A2C SS94A2D Main Feature Gen. purpose 5 VDC operation Low drift High sensitivity Noise shielded†† Noise shielded†† Noise shielded†† Output Current (mA) Magnetic Characteristics*** Span* .625 V Range (gauss)* –500 to +500 –500 to +500 –500 to +500 –100 to +100 –500 to +500 –1000 to +1000 –2500 to +2500 Temperature Error (all %s reference 25°C value)* –.055 MilliTesla = Gauss 10-1*– 4 0° to 125°C. ** Excludes load. Typical at 25°C/Maximum at –40°C. * * *@Vs J 5 VDC for SS94A1B only/@ Vs J 8 VDC for all others. † Derived from straight line between end points. †† Silver coating on back of ceramic is electrically connected to – terminal. Specified using a 2.2KV resistor unless otherwise noted. Null voltage (Vout at 0 gauss) and sensitivity are ratiometric to supply voltage. Magnets page 25. Application consideration: The output is clamped at the high end. Clamping voltage may be as low as 9VDC. The output will not exceed the clamping voltage regardless of field strength or supply voltage. Analog PDFINFO p a g e - 0 1 9