SS56 YIXIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
5.0 AMP SCHOTTKY BARRIER RECTIFIERS
5.0Amperes MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive orinductive load. For capacitive load, derate current by 20%. NOTES: PAGE:1/2 TYPENUMBER SS56 UNITS Maximum Recurrent Peak Reverse Voltage 60 V Maximum RMS Voltage 42 V Maximum DC Blocking Voltage 60 V Maximum Average Forward Rectified Current See Fig. 1 5.0 A Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 120 A Maximum Instantaneous Forward Voltage at 5.0A 0.55 V Maximum DC Reverse Current Ta=25 C atRated DCBlocking Voltage Ta=125C 0.15 mA mA Typical Junction Capacitance (Note1) 370 pF C/W Operating Temperature Range TJ -55 +150 C Storage Temperature Range TSTG -55 +150 C 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C. Unit mounted on PC board with 5.0mm×5.0 mm (0.013 mm thick) copper pads as heat sink2. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Metallurgically bonded construction * Polarity: Color band denotes cathode end * Mounting position: Any
FEATURES
- Ideal for surface mount applications * Easy pick and place * Built-in strain relief * Low forward voltage drop SS56
100 Typical Thermal Resistance R JL (Note 2) 28
A ll datasheet.com
PAGE:2/2 0.01 0.01 0.1 100 200 0.1 100 125 150 200 40 60 80 100 1 10 100 0 20 40 60 80 100 120 150 2.0 3.0 4.0 5.0 1.0 FIG.1-FORWARD CURRENT DERATING CURVE FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS AVERAGE FORWARD CURRENT AMPERES INSTANTANEOUS FORWARD CURRENT( AMPERES) INSTANTANEOUS REVERSE CURRENT (mA) PEAK FORWARD SURGE CURRENT(AMPERES) INSTANTANEOUS FORWARD VOLTAGE (V) PERCENT OF RATED PEAK REVERSE VOLTAGE% NUMBER OF CYCLES AT 60Hz LEAD TEMPERATURE ( ℃) TJ=125℃ PULSE WIDTH=300 S 1% DUTY CYCLE TJ=TJMAX 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=25℃ RESISTIVE OR INDUCTIVE LOAD FIG.5-TYPICAL JUNCTION CAPACITANCE TJ=100℃ TJ=125℃ REVERSE VOLTAGE. VOLTS 0.1 1 10 100 100 4000 1000 JUNCTION CAPACITANCE(pF) 130 TJ=25℃ TJ=100℃ RATING AND CHARACTERISTIC CURVES (SS56 ) A ll datasheet.com