DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Magnetoresistive Position Sensors SS552MT Surface Mount Sensor SS552MT Series Sensing and Control

FEATURES

  • Low gauss operation can extend sensing distance to one inch or more, depending upon size
  • Digital current sinking output
  • Omnipolar – can be operated with either north or south magnetic pole
  • 0 kHz to over 100 kHz operating speed
  • Surface-m ount package allows automated, lower cost assembly
  • Small size TYPICAL APPLICATIONS
  • Cylinder position sensing in pneumatic cylinders
  • Elevator sensor
  • Lid sensor for laptop computers
  • Position sensor for material handling equipment
  • Geartooth sensor for industrial or automotive

applications

where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. SS552MT is a digital position sensor in an SOT-89 style surface-mount package with omnipolar magnetic action. The sensor has magnetoresistive material integrated on silicon and encapsulated in a plastic package. The integrated circuit provides a digital output in response to very low magnetic fields. Though this signal is identical to our digital Hall effect sensors, it can be achieved by magneto-resistive sensors at much greater sensor-to- magnet distances. Surface-mount packages are mounted directly on the electrical traces on the PC board and attached by an automatic solder reflow operation which requires no holes, so it reduces the cost of the PC board. These packages are supplied on tape and reel and can be automatically placed on PC boards by use of pick-and-place equipment. SS552MT Series is operated by magnetic fields (North or South) parallel to the sensor package. NOTE: Due to the inherent high sensitivity of these sensors, stray magnetic fields which are parallel to the IC may affect operation. WARNING MISUSE OF DOCUMENTATION

  • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide.
  • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury.

Magnetoresistive Position Sensors SS552MT Surface Mount Sensor SS552MT Series ELECTRICAL SPECIFICATIONS over 3.8 Vdc to 30 Vdc and -40 °C to 150 °C [-40 °F to 302 °F] unless otherwise noted Min. Typ. Max. Remarks Supply Current (without load) at 25°C, with 16 V supply – 6 mA 11 mA 10 mA Max. operated Max. released Supply Voltage 3.8 Vdc 30 Vdc Output Voltage (operated) – 0.25 V 0.40 V Sinking 20 mA max. Output Leakage Current (released) – 10 µA Leakage into sensor output Output Switching Time Rise Fall – 0.2 µs 0.1 µs 1.5 µs 1.5 µs 10% to 90%, 1600 Ω, 20 pF load 90% to 10%, 1600 Ω, 20 pF load MAGNETIC CHARACTERISTICS OVER 3.8 TO 30 VDC SUPPLY VOLTAGE Temperature Range Max. Operate Min. Release Max. Differential -25 to 85°C [-13 to 185°F] 25 gauss 5 gauss 7 gauss -40 to 150°C [-40 to 302°F] 25 gauss 4 gauss 8 gauss ABSOLUTE MAXIMUM RATINGS* Supply Voltage (Vs) -0.5 Vdc to 30 Vdc Voltage Externally Applied to Output 30 Vdc max. (OFF cond. only) -0.5 Vdc min. (OFF or ON cond.) Output ON Current 20 mA max. Temperature -40 °C to 150 °C [-40 °F to 302 °F] Magnetic Flux No limit—circ uit cannot be damaged by magnetic overdrive *Absolute maximum ratings are the extreme limits the device will withstand without damage to the device. However, the electrical and mechanical characteristics are not guaranteed as the maximum limits (above recommended operating conditions) are approached, nor will the device necessarily operate at absolute maximum ratings. BLOCK DIAGRAM CURRENT SINKING OUTPUT (NPN)

2 Honeywell • Sensing and Control

Magnetoresistive Position Sensors SS552MT Surface Mount Sensor SS552MT Series MOUNTING DIMENSIONS TAPE DIMENSIONS (for reference only) mm/in NOTE: This product is sold in tape and reel form only, per EIA STD 481. There are 1,000 parts per reel. REEL DIMENSIONS (for reference only) mm/in Honeywell • Sensing and Control 3

Magnetoresistive Position Sensors SS552MT Surface Mount Sensor SS552MT Series ORDER GUIDE Part number Description SS552MT Magnetoresistive surface mount sensor Sensing and Control Honeywell

11 West Spring Street

Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. For application assistance, current specifications, or name of the nearest Authorized Distributor, contact a nearby sales office. Or call: 1-800-537-6945 USA 1-800-737-3360 Canada 1-815-235-6847 International FAX 1-815-235-6545 USA INTERNET www.honeywell.com/sensing info.sc@honeywell.com Freeport, Illinois 61032 005851-EN IL50 GLO 1103 Printed in USA Copyright 2003 Honeywell International Inc. www.honeywell.com/sensing