SS52C_V01 CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications M etal silicon junction,majority carrier conduction Low power loss,high efficiency B uilt-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 250 °C/10 seconds at terminals Reverse Voltage - 20 to 200 Volts Forward Current - 5.0 Ampere Mechanical Data Case: JEDEC DO-214AB/SMC molded plastic body Terminals: Solderable per MIL-STD-750,Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight : 0.003 ounce, 0.095 grams Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Maximum Ratings And Electrical Characteristics Parameter SYMBOLS SS52C SS53C SS54C SS55C SS56C SS58C SS510C SS5150C SS5200C UNITS Marking Code MDD SS52C MDD SS53C MDD SS54C MDD SS55C MDD SS56C MDD SS58C MDD SS510C MDD SS5150C MDD SS5200C Maximum repetitive peak reverse voltage VRMM 20 30 40 50 60 80 100 150 200 V Maximum RMS voltage VRMS 14 21 28 35 42 56 70 105 140 V Maximum DC blocking voltage VDC 20 30 40 50 60 80 100 150 200 V Maximum average forward rectified current at TL(see fig.1) I(AV) 5.0 A Peak forward surge current 8.3ms single half sine-wave superimposed onrated load (JEDEC Method) IFSM 175 A Maximum instantaneous forward voltage at 5.0A VF 0.55 0.70 0.85 V Maximum DCreverse current TA=25℃ at rated DCblocking voltage TA=125℃ IR 1.0 mA50 Typical junction capacitance (NOTE 1) CJ 600 400 pF Typical thermal resistance (NOTE 2) RJA 35.0 ℃/W Operating junction temperature range TJ -55 to +150 ℃ Storage temperature range TSTG -55 to +150 ℃ 3.The typical data above is for reference only. Dimensions in inches and (millimeters) DO-214AB/SMC 0.060(1.52) 0.030(0.76) 0.320(8.13) 0.305(7.75) 0.012(0.305) 0.006(0.152) 0.008(0.203)MAX. 0.103(2.62) 0.079(2.06) 0.126 (3.20) 0.114 (2.90) 0.280(7.11) 0.260(6.60) 0.245(6.22) 0.220(5.59) 150
Rev:2019A0 Page :2 Typical Characterisitics The curve above is for reference only. https://www.microdiode.com SS52C THRU SS5200C Reverse Voltage - 20 to 200 Volts Forward Current - 5.0 Ampere Fig.2 Typical Reverse Characteristics Instaneous Reverse Current ( μ A) 20 40 60 800 TJ=25°C TJ=100°C Percent of Rated Peak Reverse Voltage（%） 100 10 0 101 10 2 10 3 10 4 TJ=75°C Fig.4 Typical Junction Capacitance Junction Capacitance (pF) Reverse Voltage (V) Fig.3 Typical Forward Characteristic Instaneous Forward Current (A) Instaneous Forward Voltage (V) Fig.1 Forward Current Derating Curve 1.0 2.0 3.0 4.0 5.0 6.0 0.0 25 50 75 100 125 Average Forward Current (A) 0.01 100 100 Fig.6- Typical Transient Thermal Impedance /Transient Thermal Impedance（ W）°C t, Pulse Duration（sec） 0.1 1 10100 Fig.5 Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (A) Number of Cycles at 60Hz 8.3 ms Single Half Sine Wave (JEDEC Method) 0.1 0 0.5 1.0 1.5 2.0 SS52C/SS54C SS56C/SS58C SS510C/SS5200C 0.1 10 100 500 1001 1000 TJ=25°C SS52C/SS54C SSS56C/SS5200C 125 180 Case Temperature (°C) 150 150 100 175 SS52C~SS58C SS510C~SS5200C
https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout E B d F W PA D D1D2 C T Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. Reel packing SS52C THRU SS5200C Reverse Voltage - 20 to 200 Volts Forward Current - 5.0 Ampere Item Tolerance SMC Carrier width Carrier length Carrier depth Sprocket hole 13" Reel outside diameter 13" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width P E B C d F T W P A D D Symbol 0.1 0.1 0.1 min 0.5 0.1 0.3 1.0 0.1 0.1 0.1 0.1 0.1 2.0 unit:mm 1.50 1.75 7.50 8.00 4.00 2.00 0.25 6.15 8.41 2.42 W1Reel width 330.00 50.00 .00 16.00 16.50 0.05 SMC 13" 3 ,000 4.0 6000 190*19 0*41 330 365* 365* 340 42000 14.0 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(mm)(mm)(mm)(pcs)(mm)(pcs) 0.150 0.472 Symbol Unit (mm) A C D 0.160 3.8 E B Unit (inch) 0.311 4.1 0.1704.3 7.9